User Control Inside Update Panel Causing Full Page Postback
Jul 13, 2010
I have a user control with linkbuttons (used for paging) and a repeater inside an update panel. The paging works correctly, but is causing a full page postback every time I click through to the next page.
The update panel looks like this:
[code]....
So far, I have tried adding an async postback trigger for the user control, which does cause an async postback but does not update the rest of the text in the update panel. In otherwords, the async postback occurs and the next page shows up, but the original text in the repeater is there as well just below it.
I have also confirmed that I have IDS set on my linkbuttons, since that can trigger a full postback inside an update panel.
I have tried changing the update panel mode (Always, Conditional, ChildrenAsTriggers, etc.).
None of it makes a difference - the only thing that actually causes an async postback is to use the trigger, but then the rest of the content in the update panel is not updated, so I get duplicate content.
View 2 Replies
Similar Messages:
Jan 26, 2010
I'm using the same thing on different page and it works fine in there, but on this specific page, this is not working.
Here's what I have:
<asp:UpdatePanel ID="upMain" runat="server" UpdateMode="Conditional" Visible="true" RenderMode="Inline">
<ContentTemplate>
<asp:DropDownList ID="ddlNewService_PortTelco" runat="server" Width="250" CssClass="dropdown" AutoPostBack="true" OnSelectedIndexChanged="Provision_PortedTelcoChanged"></asp:DropDownList>
</ContentTemplate>
</asp:UpdatePanel>
On the way before the DropDown there is one DIV (html one), and then few asp:Panels.
View 3 Replies
Jun 1, 2010
In my default.aspx page I have a PlaceHolder control within an UpdatePanel. In this placeholder control I will dynamically load a web user control, which is just a form with a submit button. On this user control, I have the form within an update panel and I have the "Submit" button's Click Event added to the triggers.
When I submit the form, the UpdatePanel on the web user control nor the update panel on the default.aspx page are capturing the post back, thus causing a full post back which refreshes my page.
how to capture this post so its rendered in Ajax and not a full post back?
View 1 Replies
Nov 29, 2010
How do I conditionally trigger a full page postback from a link button inside of an update panel?
I have a custom control that contains its own updatepanel with a link button nested inside of it. When the link button is pressed I want its event handler to have the option of either letting the control update as normal or doing a full postback on the page.
Here is the control hierarchy:
Page
Custom Control
UpdatePanel
LinkButton
Event handler Pseudo code:
LinkButton Click Handler Begin
If is a partial post back AND a full postback is needed
Page.DoFullPostback
End If
End Handler
Note: I aways need the partial postback to happen. I was considering injecting a __DoPostback in the controls markup but this seems hacky to me.
View 2 Replies
May 2, 2010
I have an update panel in a user control and I am adding multiple instances of it for example 5.
When that update panel refreshes the page load occurs 5 times.
How can I prevent it only for once?
View 3 Replies
Oct 1, 2010
I have many controls like dropdown, radiobuttonlist, etc on my page and I put all these controls inside the update panel so that the page doesn't look to be posting back when something is selected. Now the working on the page is very smooth. But the session object isn't getting refreshed even if I postback to the server and as a result even if the users are working on the page they are being sent to the login screen after 20 mins.
Is there anyway where I could put all the controls in update panel and still refresh the session after any postback(dropdown selection)
View 4 Replies
Jan 1, 2010
Below is the sample code on using the update panel. The page just has a button and a label. On button click it updates the label with the server time. Though the label is inside the update panel the page goes for a complete postback. in understanding why it is behaving like that. I tried the options of Updatemode, using different script references nothing seems working for this simple application.
-- aspx page
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
View 2 Replies
Aug 20, 2010
Is something like this possible?
Dim iCounter as Integer
Dim iQuantity as Integer = 10
Protected Sub btnFoo_Click Handles btnFoo Yadda
For i as Integer = iCounter to iQuantity - 1
//do something with AsyncPostBackTrigger until iCounter = iQuantity - 1
//then trigger a full postback
Next
End Sub
I am new to the concept and feel like there must be something really easy that I am missing.
View 2 Replies
Apr 28, 2010
I am having issue with my ModalPopUpExtender's OKControlID. I have a button inside an update panel that should do AsyncPostBack. The button works fine and runs server side code but it causes full page postback. How do I solve this issue? I want the 'OK' button inside the modalpopup to call the serverside code and update Label control 'label3' without causing the page flash. Given below is my code;
MarkUp:
<html xmlns="http://www.w3.org/1999/xhtml" >
<head id="Head1" runat="server">
<title>Next Gen Web Browser</title>
<script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.3.2.js" type="text/javascript"></script>
[Code]....
View 5 Replies
Apr 9, 2010
I've created a multiple uploadfile user control - upload_multiple_files.ascx:
[Code]....
which has an update panel ID = up_upload_multiple_files this user control will be placed inside a modalpopupextender. My question is when I click in any button AddFile, RemvFile, Upload there's a postback so the page is reloaded and the modalpopupextender disapears Is there a way to to troubleshoot this?
View 8 Replies
Aug 3, 2010
I have a link button inside an update panel. The problem is the link button on postback is updating the whole page. Tried it with a normal button and the page is not refreshed all. Here's the code.
<asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent">
View 5 Replies
Oct 20, 2010
I am having an issue with an update panel, which is still causing the entire page to postback.
I have made sure i have all the correct bits in the web.config, section groups, httphandlers, httpmodules, additonal assemly etc... but it still does not work. I have got it to work in a way,which is why i think i have the config right, because if i take the search panel of and place it outwith the update panel, the go button only postsback the rest of the page not what is inside the updatepanel.
I am using a master page, but the update panel only appears in the content page, within the content tags.
[Code]....
View 9 Replies
Jan 14, 2011
I have the following scenario. I have a page that hosts several user controls. The user controls are all surrounded by a single update panel. All user controls have a save button on them. When the save buttons are clicked the page updates the update panel as expected. Some of the user controls contain editable list views. Whenever an action is taken on these list views, the Update Panel is NOT refreshed, but the whole page posts back. How can I get these ListViews to also refresh the Update Panel? I cannot post the code because of NDA. There are no javascript errors on the page reported by either IE8 or Chrome.
View 1 Replies
Sep 16, 2010
Does anyone know a simple way to determine if a user control is contained in an update panel that was triggered for async postback?
At the moment, the only pseudo logic for this I can think of is?
'Loop through the update panel controls on the page and find the one that is involved in the postback (isInPartialRendering)
'Try to find the user control as a child of the update panel
View 5 Replies
Sep 21, 2010
I created a .NET user control to work as a DropdownCheckbox and added Jquery to give the sliding and hide effects. The code is as below:
[Code]....
This control works fine in a normal page, but once I put it inside an update panel it doesn't work. Is there a work around or simply I can't use JQuery inside update panel?
View 1 Replies
Jun 8, 2010
I am hosting a Windows User Control in my web page using <object> tag. Everything works fine when the control is outside the updatepanel and is independent of other web controls but when I move the control inside the update panel, it doen't load the user control properly.
<object id="myBrowser" classid="http:MyBrowser.dll#MyBrowser.UserControl1" height="20" width="400" VIEWASTEXT></object>
why it doesn't render the control properly and what can I do to fix it?
I tried moving the user control outside the update panel but since this user control is shown/hidden dynamically and is rendered based on other web controls which are inside an Update Panel, the user control is not shown at all.
View 1 Replies
Feb 16, 2010
I have a user control, that has an update panel and update progress control in it.
I use this user control in more than 1 location on the same page.... problem is, when ucA posts back, I see the update progress control for both ucA and ucB. I assume this is because it is a user control and the update panel and progress are named the same?
Either way - how do I make it so that the update progress only displays for the proper user control?
View 3 Replies
Jul 14, 2010
I've exempted the irrelevant bits of code. Essentially, I am trying to change the URL of an image control inside of an update panel inside of a custom user control from a function called inside an update panel from my main page. Using UpdatePanel.Update() isn't working: I end up waiting for the next full page POST to occur before all the updates I make to CustomControl from buttons within the main page's update panel are visible. I verified that Update() was being called via the debugger: there are no issues in that department.
Here, you can see Custom Control and the Button declared. The button is in an update panel to avoid giving a full POST and causing the whole page to reload.
<cust:CustomControl runat="server" ID="CustomControl1">
<asp:UpdatePanel runat="server" ID="UpdatePanel1"> <ContentTemplate>
<asp:Button id="Button1" runat="server" OnClick="DoStuff" />
</ContentTemplate> </asp:UpdatePanel>
This control stores images within their own seperate update panels because rerendering the images is very slow (it requires processing arrays of millions of datapoints) and the user only ever needs to modify one image at a time. I'm using Image1 as an example.
[Code]....
View 3 Replies
Feb 11, 2011
I have a link button inside a template field of a gridview. The gridview is wrapped in an update panel. I want the link button to fire an async postback but it always fires a full postback. Why is this?
This is a similar problem to the one described in the link below. However, I have tried doing a RegisterAsyncPostbackControl in the gridview databound, but this did not work.
[URL]
View 10 Replies
Mar 3, 2010
I have a control on a page. In the control's pre-render event I'm executing some code that's taking about a minute to execute. This means the whole page is unresponsive until the control's pre-render event is finished executing.I tried putting the control inside an update panel, but it doesn't matter the rest of the page still won't render until the pre-render event of the control is finished executing. I've attached a very simple example of my code (The event that's slowing up the control's pre-render event is not Thread.Sleep(1000):
[Code]....
[Code]....
[Code]....
View 5 Replies
Mar 1, 2011
I'm manually triggering an update panel refresh using javascript (long story- but it has to be this way), but I still see a page flicker outside of the update panel, so I'm concerned that the whole page is getting refreshed rather than the update panel. Any way I can determine this? Perhaps some value in the code-behind on the postback? Or some client side trick? If the jQuery $(document).ready() event fires, does that mean the whole document is refreshing or just the update panel?
View 4 Replies
Jun 4, 2012
I removed the Trigger section the partial post back does not occur when I click add button on footertemplate of the gridview.
View 1 Replies
Oct 15, 2010
When an asynchronous postback happened inside update panel, another postback happens also for MasterPage not only update panel embedded page .
I want to prevent this MasterPage postback .
is this possible ? think like i have a MasterPage
and another page which is test.aspx which is content page of MasterPage
i have update panel at test.aspx
when asynchronous postback happens at this test.aspx update panel it also loads MasterPage Page_Load
i want to prevent this (it should not also load MasterPage Page_Load)
View 2 Replies
Oct 15, 2010
When an asynchronous postback happened inside update panel, another postback happens also for MasterPagenot only update panel embedded page .I want to prevent this MasterPage postback . is this possible ?think like i have a MasterPage and another page which is test.aspx which is content page of MasterPagei have update panel at test.aspxwhen asynchronous postback happens at this test.aspx update panel it also loads
MasterPage Page_Loadi want to prevent this (it should not also load MasterPage Page_Load)
View 3 Replies
Jun 16, 2015
My bootstrap tab is inside update panel now on postback it loses its active tab state . I referred this article :
[URL]
But it didn't worked for me. How to maintain bootstrap tab active on postback inside update panel.
View 1 Replies
