I found alot of thread about how to postback after close the modal popup.
But for me, the system has already did it for me.
How to prevent page from posting back?
here's my code
[Code]....
I have a button on my web form. When it is pressed, the event method for that button is called as it should be. However before the buttons method is called, the page load event is first called. Is there a way to prevent the page load event from being called when the button is pressed? I know about using !Page.IsPostback in the Page load method. However I wish to avoid posting back to the Page Load method altogether when this particular button is pressed.
View 6 RepliesGot a pretty simple page where i want an update panel to become visible or hidden based on a button click. When i run this page in VS2010 in debug mode it works as i expected it to - page does not post back, the panel just appears or disappears on the page without the whole page refreshing.
I uploaded this to my server, and the page is posting back when you click the button.
Server is win2k8R2 x64 IIs7.5
Do i need to enable anything in the IIS configuration?
Here's the code I'm using but it's not working.
[Code]....
[Code]....
I have the above code, on the get method I do the following.
[Code]....
It only hits the index once after loading the page. It never goes to the index method.
when any Button control is clicked generally it Postback the page to itself, and the same page is regenerated.This is the usual defination of postback in context of a Button Control. But my dear friends i am confused that what is the actual mechanism behind this.Okey say for definition the above statement is fine but believe me i not not getting the actual meaning.What is posting back the Page? What is Page in browser's context? There is only html markup, JavaScript and CSS codes in browser's page.These make up the html page. I think there is no any relation of this Browser's page with ASP.NET Page class. What does it mean that browser's content is posted back to the Page itself ?
View 1 RepliesI have a control which inherits from LinkButton and I'm trying to make sure that the user cannot cause mayhem by performing multiple postbacks. That seemed an easy enough challenge, so I have this code [snippet] on the client:
[Code]....
The alert is of course only there for debugging. If the DisableOnClick value is false, then I see the "Posting Back" alert and, when I click ok, the postback occurs - all good.
If the DisableOnClick value is true, then the "button" gets disabled and the cursor turns into an hourglass - again good. But the postback doesn't happen - not good. I assume that the ASP client code is trying to preventing the postback when it sees that the link is disabled.
So, how can I either:
Persuade the LinkButton to postback even though it has just been disabled; or[probably better] Get my client code to execute immediately after the postback code rather than before.
I have a problem of posting back in my website in some browsers. The Problem is: When I am uploading a file using file upload and button or posting page back on some event click after button click I am using:
ClientScript.RegisterClientScriptBlock(Me.GetType, "AddData", "alert('" & f_u_devideo.FileName & " Uploaded Successfully');", True)
But after that the page not not load again and a blank page comes in some browsers
Anyone knows how to do this? I have three distinct updatepanels on my page, and they're all unrelated. If possible, I would like the user to be able to interact with the other updatepanels while one is refreshing, or at least show which one is refreshing by only covering this with a div+animated gif.
View 6 RepliesI have an aspx page that has...
if (!IsPostBack)
{
PopulateBrand();
in the Page_Load. This PopulateBrand() simply populates my drop down. That works great and on post back it retains the value.
The problem I'm having is that there is also a link on the page that is posting back some parameters to this page. What is happening is that when this is clicked it's falling through this !IsPostBack section and wiping out my drop down values that I had selected and repopulating it.
How can I prevent this and just retain what I selected when this page is posting back to itself when the link is clicked?
I have the following code:
.aspx
<asp:DropDownList ID="ddlCountries" AutoPostBack="true" runat="server">
</asp:DropDownList>
[code]...
Is it possible to stop my page posting back when the user presses the enter (return) key..?
View 4 RepliesI have a master page and some child pages, i want that when i navigate the child forms, my should not post back, only the inner should navigate
View 1 RepliesI basically want to show a dialog box with confirm or cancel options on it.
Confirm should allow the partial postback to take place, cancel should not. I have tried using a trigger and calling __doPostBack() as advised here but it posts back the full page not just the panel.
$('#buttonInUpdatePanel').live('click', function (event) {
event.preventDefault();
var item = this;
var title = 'Confirm';
var msg = 'Please confirm something';
var $dialog = $("<div id='myDialog'></div>")
.html(msg)
.dialog({
modal: true,
buttons: {
"Confirm": function () {
$(this).dialog("close");
__doPostBack('Button1', null); //tried this and .submit() on the button
//return true;
},
"Cancel": function () {
$(this).dialog("close");
//return false;
}
},
title: title
});
});
My UpdatePanel:
<asp:UpdatePanel ID="UpdatePanel2" UpdateMode="Conditional" runat="server">
<ContentTemplate>
<asp:TextBox runat="server" ID="TextBox1" />
<asp:Button
ID="Button1"
Text="Add"
OnClick="AddExtraVehicle_Click"
runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="Button1" EventName="Click" />
</Triggers>
</asp:UpdatePanel>
UPDATE:
I have changed the doPostBack to use the button ID now and commented out the return true and false lines. When I click the button it calls the confirmation dialog but when you click on confirm it appears to do nothing. I was expecting a call to the method AddExtraVehicle_Click but the breakpoint didn't trigger.
How is a page kept where the user last clicked, instead of scrolling back to the top?
I have a page of controls, the user scrolls down to three dropdownlists to fill out, but when he clicks the first one, the page always scrolls back to the top, and he must scroll back down to the dropdownlists again.
I am trying to implement Login/Logout functionality in my website without using inbuilt functionality of Login controls in ASP.NET. In some pages, which require the user to be logged in, I have written this in Page_Load
if (Session["cod"] == null && Session["admin"] == null)
{
Response.Redirect("You need to Login.aspx");
}
if (Session["cod"] != null || Session["admin"] != null)
{
LinkButton1.Text = "Logout";
}
if (Page.IsPostBack == false)
{
log_bind();
grid1_bind();
grid2_bind();
}
But while I was testing this, I noticed that when I press the Back/Forward button on the browser, these pages are viewable without being logged in. How do I prevent this?
When I click Logout page redirect to Login page but when click to browser arrow back then it will goes back, I want to after Logout cannot going to back page...
View 1 Replies1- I am using updatepanel and somethings work asynchronously and others do not which are in the same page.
But could it be that using the "same" trigger for two different update panels causes the first one to be asynchronously and the second one not?
2- In php u have something called $_POST['variablename'] which u get from a previous page. Is there anything similair in ASP.NET?
My point is that I have a dropdownlist and I want in the next page to launch a message depending on what the user chooses in the dropdownlist.
how can i update another dropdownlist without posting back. i've seen the sample somewhere but its not doing anything.
Code:
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:DropDownList ID="DropDownList1" runat="server" AutoPostBack="false" OnSelectedIndexChanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem Value="0">----Select----</asp:ListItem>
<asp:ListItem Value="101">General Admin</asp:ListItem>
[code]...
I am trying to implement autocomplete using JQuery. I cannot get this to work directly from my view so I am trying to post directly back to a method in my controller that has a reference to the web service. How do I post directly back to a method in my controller?
My method name is Autocomplete URL: "/" - Takes me to the Index method of my main controller. I want to go to a different method so I can return JSON back
Code below:
[Code]....
I have a keyboard-controlled menu which I did with jquery (When I press down, it marks second option and so on...)
But after I select the option I need, I want to click enter to call the button's OnClick method as if the user really clicked it. Which means I have to do a postback.
how do I do that?
i have the below page and i am racking my brain as to why when i have two update panels do they both get post backs. i can tell cause i have two user controls- one in each panel and they both fire page load events when only the left panel should be posing back and updating itself... or else whats the point of update panels if in reality the entire page is posting back!
<asp:Content ID="StyleContent" ContentPlaceHolderID="Style" runat="server">
<link href="../Styles/ReportWizard.css" rel="stylesheet" type="text/css" />
<div class="clearFix"></div>
<div class="wizardContainer">
<asp:UpdatePanel runat="server" ID="pnlWizard">
[Code].....
I used the following code for the form download
[Code]....
But form is not posting back on execution of the above statement. What should I do , so that form postback also occurs after this statement.
I'm using ASP.NET MVC to try to postback after confirmation using javascript, this is the button:
<input type="submit" id ="RemoveStatus" value="Remove Status" name="button" onclick="return CheckRemove();"/>
This is my javascript in my CheckRemove() js function:
var button1 = document.getElementById("RemoveStatus");
if (confirm("Are you sure you want to remove status?") == true)
{
button1.disabled = true;
button1.value = "Removing status...";
__doPostBack('RemoveStatus', '');
return true;
}
else
{
return false;
}
But for some reason I get an object expected error at the __doPostBack bit, I've clearly set the id, button1 gets populated too in debug, i'v tried passing button1.id and button1 too into the __doPostBack call but it wont postback and keeps saying object expected.
I have a simple user control with this code:
<%@ Control Language="C#" AutoEventWireup="true" CodeFile="Pager.ascx.cs" Inherits="Pager" %>
<table style="width: 100%;">
<tr>[code]....
As you can see, the 2 buttons are wired to click events, which are defined correctly in the code-behind.Now, here is how I include an instance of the control on my page:
<uc:Pager ID="Pager1" runat="server" TotalRecords="100" DisplayItemsPerPage="true"
ItemsPerPageChoices="10,25,50,100" ItemsPerPageFormatString="Sessions/Page: {0}"
PageSize="25" OnPageChanged="PageChanged" OnPageSizeChanged="PageChanged" />
I noticed though, that the 2 buttons in my user control weren't causing a post back when clicked. The drop down list does cause postback, though. Here is the rendered HTML:
<table style="width: 100%;">
<tr>
<td id="ctl00_MainContent_Pager1_PageControls" align="left">[code]....
And, as you can see, there is no onclick attribute being rendered in the button's input elements. Why not?
EDIT,Ronnie, why are you so dumb??? <input type="submit" /> doesn't use javascript to post a form!