When I open my web page with my RadEditor version 7.3.6.0 on it to create a new using the editor I get a popup warning on the page.
Soon after this while using Rad Editor I get a message in IE8 (Version 8.0.6001.18702IS) saying the page has been recovered and I have lost all of my edits.
This is also happening to other people, my customers, when they use the same page on their IE browser.
I have an Editor control on my page and the user can go in use it hit save and that all works.
In another part of the page I have a simple dropdown to select a note and view it. When you push view it loads the text which was entered in via the editor control.
If the user used an order or unordered list. The text shows up but not the list part.
So if they did this:
Example
ThisAnd this
What is displaying is
Example
This
And This
Without the bullets. Same for the numbers.
I have it going to a literal control which should render the html, but it doesn't.
I am using VB.NET and implementing AJAX HTMLEditor, I want to remove some of the unused button from the HTMLEditor. I did use the Lite HTMLEditor by adding HTMLEditor.Samples.VB in App_Code folder.And add the following at the top of the page
<%@ Register
TagPrefix="customEditors"
Namespace="AjaxControlToolkit.HTMLEditor.Samples" %>
I did Saved My Texts In Database With Editor (AjaxToolkit).
Now I Want Load Data From DataBase In Page. But Don't know how can i do it.
I am using the HTML Editor with a database, which works fine. All the instructions I find show the output on the same page as the Editor - which to me doesn't make much sense... at least not for how I want to use it. I believe I need to use the Literal control, but I can't find a clear example.
If I have Editor1 on page "edit.aspx" which submits the content to database db.mdb, using fields "id" and "fldContent", how can I display the content on another page "view.aspx"?
I was wondering if anyone could tell me why any .aspx page that I drop an Ajax HTML editor on will then become painfully slow to load and update.And more importantly is there anything that can be done about it to speed it up?I am using VS2010 and targeting ASP.Net 4.0 web application and I am using the AjaxControlToolkit version 4.1.40412.2.
View 8 RepliesI went through the documentation and looked at the asp.net/webmatrix pages but could not find a RichTextEditor.
Is there one built into WebMatrix or can I just use the AjaxToolkit Html Editor or another 3rd party editor?
I was wondering if there was an easy way to change the output generation properties of the HTML editor.
I need to change it from the current XHTML standard (spans, etc) to legacy styles; <b>, <u>, <i>, etc.
I'm trying to get threading to work in ASP.NET but for some reason it keeps crashing my local server, and simply does not work at all when uploaded online. Here's the code:
protected void testThread()
{
for (int i = 0; i < 10; i++)
[code]...
I've been using MVC since the previews of 1.0 and I think I know what I'm doing, but for the life of me I can not figure out why sometimes when I use RedirectToAction it crashes saying there is no route available. Consider this in MVC 2.0:
I'm registering on my site and I first hit the SiteController, which does its magic then I am to be redirected to my new dashboard, controlled by the... DashboardController. I never make it there. I specify the action and the controller in the redirect call, but it still crashes and burns. The only thing I can possible think of is because the DashboardController is its own area, but that still doesn't help me because by my understanding it should still work regardless.
am trying to upload video into database,but i click and upload video firewall is crashing and it is same with IE is well.
View 8 Repliesi have used ajax control toolkit masked editor extender.i want to remove "_" from masking pattern and want to replace it with space. for ex. want " - - " instead of this
<
asp:MaskedEditExtender
ID="MEETxbPhone"
TargetControlID="txbPhone"
Mask="999-999-9999"
[code]...
I can't see anything about this in the forum, yet it's a problem I have both on my VPS demo box and on some live boxes too:
When I deploy anything requiring a re-compile (e.g. not just an aspx.cs, but a .cs file) about once in every three times, IIS crashes.
This then requires not just a restart of IIS, but a reboot of the entire server, to bring it back again. If I try to restart just IIS, it won't actually "stop", so it won't then start again.
I therefore try to only deploy updates late at night, but in urgent situations a problem which needs rectifying can be made much worse by an additional 5 minutes of hard downtime while the box reboots. I can't predict when this will happen, but now warn all my clients against any updates during "office hours".
Is this a known bug/fault - can I get around this, preferably not by using RDP and stopping IIS completely before I FTP the files across?
Both boxes are 32 bit Windows Web Server.
In ajax Editor control how to delete the bottom toolbar..
where should we get the Editor.css file ?
When inserting a simple embed of youtube inside the ajax editor, on firefox and chrome problems occur. On the other hand on internet explorer 8 everything works fine. I found this solution [URL]
My question is where do I find the DesignPanel.pre.js ?
Lets say I have a web service installed on ServerA. I also have a web application hosted on ServerB, completely different domain from ServerA. That web application contains a web reference to ServerA's web service, so consumes it. What happens if the WAN connection between ServerA and ServerB goes down, for whatever reason? I'm not clear if, once the web method is coded into the consuming application, that the server hosting the service has to be constantly available or not.
View 2 RepliesThe text on my website is skewed and different areas are running together when viewing my site on a Mac using either Firefox or Safari. Is there anything I can do about this?
View 1 Repliesbit of code on page laod that checks a server status and then writes the status out to a label text. This works great, but i need to make this a bit more dynamic.I need to establish a way that the service status is monitorered every few seconds to see if it stops.here is my code so far:
[Code]...
i have 2 problems with running&debugging my web projects using visual studio 2008 pro :
1.when choosing to run without debugging , IE is being opened (which is ok , since i chose it to be the default one to be opened via VS ) , and yet when i close IE , it is being opened once again .
2.when choosing to debug , visual studio crashes and IE is being frozen (can only be killed via task manager) ,even when i don't have the "debugger;" string in the javascript code.
i've tried to re-install VS , and also uninstall it and then re-install it, but it didn't help. i have windows xp sp3 home edition 32bit. what should i do? EDIT:about #1 , it seems that from some reason, VS didn't install "Microsoft Visual Studio Web Authoring Component" , and this is also why i had another problem of not being able to use the design/split mode . after installing this component, it seems that IE doesn't run twice anymore. however, i still have crashes of VS when trying to debug (problem #2) ,even thogh script debugging is enabled on IE. the weird thing is that on maxthon2 , which uses IE engine, debugging works just fine.
I'm building a browers-based game that will need to constantly be updating EVERYONE'S accounts regularly; what is the best way to go about doing this? Creating a process that runs every time someone goes to a page on my site slows down the load time immensely. Do I need to create a windows scheduled task that calls this/these process(es)? It will need to constantly run.
View 2 RepliesI need to trigger a Console App (exe) file from a asp.net webforms page. Obviously the main issue is permissions, and for now I'm just trying to get this working by letting the asp.net service impersonate the main Administrator account. Once I can get it working in a stable fashion, I'll set up it's own user and permissions. For now I would really appreciate assistance in getting this working.
[code]...
Also, the EXE can be launched directly on the server via RDC and it runs just fine.I've wasted almost 2 days trying to get this to work, and at this point I'm desperate for some experienced input on this job. I'd even be willing to throw in $50 as a thankyou gift to whoever has the solution.
I have an image in a report (a school logo stored in a folder).
My issue is that this image does not appear constantly on my reports, all of which use the same code to load it.
The image is stored in a Blob in an unconected dataset on the report.
The data set is filled as follows
public static DataTable SchoolLogo()
{
string ImageFile = System.Web.HttpContext.Current.Request.MapPath("~/Images/ReportImages/logo.jpg");
DataTable data = new DataTable();
[Code]....
I have about 6 reports that use this code and the image is loaded sometimes and sometimes it is not (even within the same report if it is loaded several times.)
I have the following in a .ascx control and it is crashing today due to leap year I assume. Is there any global setting i can do to make this work?
Code:
<cc1:CalendarExtender ID="TextBox4_CalendarExtender" runat="server" Enabled="True"
TargetControlID="TextBox4" SelectedDate='<%# Datetime.Parse(Now.Month & "/" & Now.Day & "/" & DateTime.Now().AddDays(365).Year) %>'>
</cc1:CalendarExtender>
I want to customize the ajax editor control in my Web application .I followed the following tutorial:
http://www.asp.net/ajax/tutorials/how-do-i-use-the-html-editor-control--cs
but I get the error
"the type or namespace mycontrols could not be found"...
App_Code:
[Code]....
how I could add a styles drop down to the Ajax Editor? I've created CSS styles (such as H1, H2, etc), but how can I add these as options for the user to select from the editor?
View 4 Replies
