AJAX :: Setting Focus On TextBox When HTML Editor Is Used?
Jun 19, 2013
I have Web App. in that One note control and one textbox,when I run the app then cursor focus the note but I want to focus on textbox,I have use Focus property but their is no work
in my page i have 10 DDL and an Ajax Html Editor, each and every selectedIndexChanged event of the DDL i'lll focus the next DDL but the focus not set to the DDL, instead of that its always focused to the editor. i set tabindex but no luck.. may i know what is the issue and how to resolve this?
I have a panel which contains a textbox and a button. The panel will be shown as a modal popup using the 'modal popup extender' . I want to set the focus to the textbox in the panel when my modal pop up loads .
I am trying to figure out if the htmleditor contains a textbox within ajaxhtml editor control. If it does, i would like to find the textbox control so i can work with the textbox properties and set properties as needed, for example: rows, columns, ontextchange properties.
using vb.net/asp.net 2005 after the user clicks on a button in the buttonClick event I am trying to set the focus at the end of the function simply as follows:
[Code]....
However the focus is instead going to another button. The tabIndex property is not set on any controls on the page.
In my markup, in addition to a number of other controls I have the following:
<%:Html.TextBoxFor( m => m.UserName)%>
I'd like to be able to set the focus to this textbox when the page is loaded. Is there a really easy way to do this? I have to admit that so far I haven't found it. I know that I can do this using something like this JQuery/Javascript code: $('#UserName').focus();
However, I don't like the fact that the model field name 'UserName' has to be expressed as a string constant again here - it smells of a maintenance problem. I'd really like to be able to reference the model field directly if possible. Somethiing like this: $('#' + '<%:Html.ModelFieldNameFor(m => m.UserName)%>').focus();
I have an Editor control on my page and the user can go in use it hit save and that all works.
In another part of the page I have a simple dropdown to select a note and view it. When you push view it loads the text which was entered in via the editor control.
If the user used an order or unordered list. The text shows up but not the list part.
So if they did this:
Example ThisAnd this
What is displaying is
Example This And This
Without the bullets. Same for the numbers.
I have it going to a literal control which should render the html, but it doesn't.
I am trying to set the focus to the user name TextBox which is inside an ASP.NET Login control.
I have tried to do this a couple of ways but none seem to be working. The page is loading but not going to the control.
Here is the code I've tried.
SetFocus(this.loginForm.FindControl("UserName")); And TextBox tbox = (TextBox)this.loginForm.FindControl("UserName"); if (tbox != null) { tbox.Focus(); } // if
In set the Send button as default button in my page. In the button click event I try to set the focus to the TextBox. When clicking the button the event work fine but While clicking the enter button I cant input text to TextBox.
Each textbox has a TextChange() event wired up for data validation.
These events fire just fine, the data validation works just fine.
My issue is this: User enters text into TextBox1 one then tabs into TextBox2. The cursor appears for a split second inside of TextBox2 then disappears as focus is being set somewhere else on the page. I'm not sure how that change of focus is happening.
In this scenario, after tabbing out of TextBox1, how can I maintain focus on TextBox2 (and then subsequently TextBox3, TextBox4,etc..)
I have wierd situation on my side. I have a page that uses a user control driven by ajax. When I enter a code in txtbox. Corresponding questions for that code are brought into the middle section of page basically in user control. I have requirement of setting the focus on the controls so that I can tabout the field with feel of questions being a part of same page.
I have to manually set the focus for the first question and after going thru all the questions I get control lost. Basically it dont come back to the actual page. I have tried to manually put the focus on the button but I couldnt.
I have an autocomplete extender on my page and it works fine. However as soon as I set focus of its textbox via either straight javascript or codebehind the autocompleteextender no longer works.
I have a problem setting focus on a usercontrol in asp.
I have a masterpage with a script manager and a few contentpages. On two of the contentpages I have a usercontrol. Inside this control I have a updatepanel that has another usercontrol that has a asp:textbox, aka TheTextBox. I need those pages to set the focus to TheTextBox.
The innermost usercontrol sets focus in page_prerender: ScriptManager.GetCurrent(Page).SetFocus(TheTextBox);
Now this works on the first pageload, and the second. But not on the third load! And i cant really understad why, but I'm guessing that its because the 2nd postback is renderd inside an updatepanel and somehow that cause the setfocus to not trigger propperly after the 2nd postback.
i have calendar extender that has targetcontrol property set to a textbox and i want the focus to be on that textbox after the user select a date , i have tried with this OnClientDateSelectionChanged = "SetControlFocus();" in which SetControlFocus is a javascript function that set the focus to the textbox with this line document.getElementById('txtbox').focus(); but it didn't work!
I used Ajax collapsible extenders (1 to 9) with formviews in each of them on a web form.
They are all collapsed by default. If the user enters data in collapsible 5 formview and submits data, the page refreshes back to the top of the page (where the collapsible 1 is positioned). I would like the focus to stay in the region the user is working (even after insert/submit operations). How can I do this.
I have figured out a method for displaying a modal popup using the ACT ModalPopupExtender from the server side.This is really important because there is a fair amount of server side initialization that I require prior to showing the dialog.
Basically, I assign a dummybutton as the TargetControlID. Then I define a link button such that when clicked it fires an OnClick event. The handler then does whatever initialization is necessary and uses the show() method of the ModalPopupExtender. This is not rocket science. However, what appears to be rocket science is getting a control within the MPE to get the cursor focus. The problem as I see it is that because I am manually showing the dialog, the JS add_shown function never fires. Of course the add_shown function is attached through JS by using the behavior ID of the MPE. It appears to be the standard way to set focus within a MPE dialog. It appears to only work if the targetcontrolid is a real button that shows the MPE dialog when clicked.
Is it possible to set the focus within a MPE dialog when you are programatically showing the dialog and not attaching a real button press event to the MPE Target Control ID? Obviously the Page.SetFocus or Control.Focus() do not work either before or after the modal dialog is shown:
protected void SignIn_Click(object sender, EventArgs e) { Session["InTimeOut"] = true; Session["logintries"] = 0; SI_user_login_id.Focus(); /// ---> This does not set the focus either before or after the show method this.ModalSignOn.Show(); }
I'm having a bit of an issue in my ASP.Net application moving focus from a textbox in one user control to a text box in the next user control on the page after postback. I've searched high and low over the last several days to find a solution but, for whatever reason, have been unable to do so.
I have a page that has user controls loaded dynamically to allow a user to enter data.The number and type of user controls loaded to the page is determined at run time based on a database query.It is possible than many controls of the same type can be loaded. Each user control has its own update panel. Within the update panel of each control is a regular asp panel. Inside of the regular panel there are at least 2 server controls (any other controls that may exist in the user control are not affected by this issue) - a text box and a button.The defaultbutton property of the regular panel is set to the ID of the button within the user control. The desired behavior is to allow the user to enter data into the textbox on one user control hit enter to save the data on that user control the application will set focus to the textbox of the next user control on the page after the data from the "current" user control has been saved. Other considerations;
The application uses master pages. We make extensive use of ajax and the ajaxtoolkit in the application. I am using Visual Studio 2010 and .Net 4 The issue - when first entering the page, one can enter data into the first textbox and press the enter key. Data from "current" user control is correctly saved and focus is correctly moved to the next user control on the page.
Data can be entered into the textbox of "new" user control and when the enter key is pressed, the data is correctly save. The focus appears to move correctly to the next user control on the page.Data cannot be entered into the textbox of the control. Pressing the enter key will not save the data (because none was entered) but the focus will move to the textbox of the next user control on the page.
Data can be entered into the textbox of the user control. When the enter key is pressed, the data is correctly saved and the focus appears to move correctly to the textbox of the next control on the pageBasically, steps 3 and 4 are repeated until the end of the user controls on the page, alternating between being able to enter data and not. Other items of note When one is able to enter data into the textbox of a user control, one can correctly tab through the textboxes of each user control until the end of the page When one is not able to enter data into the textbox of a user control, pressing the tab key will take the focus to the address bar of the browser.
I created a much simplified example of the scenario described above and was able to consistently reproduce the "bad" focus behavior. All of the ajax toolkit controls and code where stripped out of the sample to rule the toolkit out as a cause. The behavior still occurs without the toolkit.
I am including the code for default.aspx and WebUserControl1.ascx.
I have a gridview with edit button. I want to set focus on a textbox in a row when clicking "Edit" button. (it is a label before clicking edit, it become a textbox after clicking edit). However, i can't set it focus in Rowdatabound. By the way, I make a simple .aspx page and just put a textbox on the tabcontainer tab panel. I found that i totally cannot set focus on this text box.
Here is aspx page with a text box, the .aspx page code is below:
I'm trying to update my web site with the HTMLEditor control for Blog posting. I really need to know what my web.config changes need to be too. I get this error:Controls collection cannot be modified because the control contains code blocks (i.e. <% ... %>).An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
When inserting a simple embed of youtube inside the ajax editor, on firefox and chrome problems occur. On the other hand on internet explorer 8 everything works fine. I found this solution [URL]
My question is where do I find the DesignPanel.pre.js ?