AJAX :: Setting Focus Back On Page
Jan 11, 2010
I have wierd situation on my side. I have a page that uses a user control driven by ajax. When I enter a code in txtbox. Corresponding questions for that code are brought into the middle section of page basically in user control. I have requirement of setting the focus on the controls so that I can tabout the field with feel of questions being a part of same page.
I have to manually set the focus for the first question and after going thru all the questions I get control lost. Basically it dont come back to the actual page. I have tried to manually put the focus on the button but I couldnt.
View 3 Replies
Similar Messages:
May 11, 2010
I have a panel which contains a textbox and a button. The panel will be shown as a modal popup using the 'modal popup extender' . I want to set the focus to the textbox in the panel when my modal pop up loads .
View 4 Replies
Jun 16, 2010
I have an autocomplete extender on my page and it works fine. However as soon as I set focus of its textbox via either straight javascript or codebehind the autocompleteextender no longer works.
View 2 Replies
Aug 13, 2010
I have a problem setting focus on a usercontrol in asp.
I have a masterpage with a script manager and a few contentpages. On two of the contentpages I have a usercontrol. Inside this control I have a updatepanel that has another usercontrol that has a asp:textbox, aka TheTextBox. I need those pages to set the focus to TheTextBox.
The innermost usercontrol sets focus in page_prerender: ScriptManager.GetCurrent(Page).SetFocus(TheTextBox);
Now this works on the first pageload, and the second. But not on the third load! And i cant really understad why, but I'm guessing that its because the 2nd postback is renderd inside an updatepanel and somehow that cause the setfocus to not trigger propperly after the 2nd postback.
View 1 Replies
Jan 11, 2011
In my markup, in addition to a number of other controls I have the following:
<%:Html.TextBoxFor( m => m.UserName)%>
I'd like to be able to set the focus to this textbox when the page is loaded. Is there a really easy way to do this? I have to admit that so far I haven't found it. I know that I can do this using something like this JQuery/Javascript code: $('#UserName').focus();
However, I don't like the fact that the model field name 'UserName' has to be expressed as a string constant again here - it smells of a maintenance problem. I'd really like to be able to reference the model field directly if possible. Somethiing like this: $('#' + '<%:Html.ModelFieldNameFor(m => m.UserName)%>').focus();
View 2 Replies
Aug 5, 2010
i have calendar extender that has targetcontrol property set to a textbox and i want the focus to be on that textbox after the user select a date , i have tried with this OnClientDateSelectionChanged = "SetControlFocus();" in which SetControlFocus is a javascript function that set the focus to the textbox with this line document.getElementById('txtbox').focus(); but it didn't work!
View 5 Replies
Jun 19, 2013
I have Web App. in that One note control and one textbox,when I run the app then cursor focus the note but I want to focus on textbox,I have use Focus property but their is no work
View 1 Replies
Jun 7, 2010
I have a page that I am adding user controls to the bottom of the controls each postback. The User Control has a textbox in it and the focus needs to be on this newly created control textbox each time. It all works almost perfectly however when there are too many controls to fit on the page, because I set the focus to the textbox the bottom of the page is set to the textbox that has focus not the very bottom of the page. I have a submit button below this which ends up below the page limit. How can I set focus to a textbox but still scroll to the every bottom of the page to show the submit button.
View 1 Replies
Feb 1, 2011
I used Ajax collapsible extenders (1 to 9) with formviews in each of them on a web form.
They are all collapsed by default. If the user enters data in collapsible 5 formview and submits data, the page refreshes back to the top of the page (where the collapsible 1 is positioned). I would like the focus to stay in the region the user is working (even after insert/submit operations). How can I do this.
View 4 Replies
Feb 22, 2011
I have figured out a method for displaying a modal popup using the ACT ModalPopupExtender from the server side.This is really important because there is a fair amount of server side initialization that I require prior to showing the dialog.
Basically, I assign a dummybutton as the TargetControlID. Then I define a link button such that when clicked it fires an OnClick event. The handler then does whatever initialization is necessary and uses the show() method of the ModalPopupExtender. This is not rocket science. However, what appears to be rocket science is getting a control within the MPE to get the cursor focus. The problem as I see it is that because I am manually showing the dialog, the JS add_shown function never fires. Of course the add_shown function is attached through JS by using the behavior ID of the MPE. It appears to be the standard way to set focus within a MPE dialog. It appears to only work if the targetcontrolid is a real button that shows the MPE dialog when clicked.
Is it possible to set the focus within a MPE dialog when you are programatically showing the dialog and not attaching a real button press event to the MPE Target Control ID? Obviously the Page.SetFocus or Control.Focus() do not work either before or after the modal dialog is shown:
protected void SignIn_Click(object sender, EventArgs e)
{
Session["InTimeOut"] = true;
Session["logintries"] = 0;
SI_user_login_id.Focus(); /// ---> This does not set the focus either before or after the show method
this.ModalSignOn.Show();
}
View 6 Replies
Jun 15, 2010
I am trying to set the focus to the user name TextBox which is inside an ASP.NET Login control.
I have tried to do this a couple of ways but none seem to be working. The page is loading but not going to the control.
Here is the code I've tried.
SetFocus(this.loginForm.FindControl("UserName"));
And
TextBox tbox = (TextBox)this.loginForm.FindControl("UserName");
if (tbox != null)
{
tbox.Focus();
} // if
View 3 Replies
May 6, 2010
I have been browing forums & googling for a couple of hours this morning, trying to find an answer to what (to me) should be a very simple issue. (I am a Delphi programmer moving somewhat reluctantly to Visual Studio C# , for web apps) I have created the simplest ASP.NET website in Visual Studio, containing a Textbox and a Button. When the website loads, I want Textbox1 to have focus. Simply doing
[Code]....
and this too does not work. However, if I press the Enter key when the webpage is displayed, then focus does move to TextBox1 (and pressing Enter again will fire any code attached to Button1). Surely it cannot be this hard to perform something so simple?
View 9 Replies
Nov 9, 2010
I'm having a bit of an issue in my ASP.Net application moving focus from a textbox in one user control to a text box in the next user control on the page after postback. I've searched high and low over the last several days to find a solution but, for whatever reason, have been unable to do so.
I have a page that has user controls loaded dynamically to allow a user to enter data.The number and type of user controls loaded to the page is determined at run time based on a database query.It is possible than many controls of the same type can be loaded. Each user control has its own update panel. Within the update panel of each control is a regular asp panel. Inside of the regular panel there are at least 2 server controls (any other controls that may exist in the user control are not affected by this issue) - a text box and a button.The defaultbutton property of the regular panel is set to the ID of the button within the user control. The desired behavior is to allow the user to enter data into the textbox on one user control hit enter to save the data on that user control the application will set focus to the textbox of the next user control on the page after the data from the "current" user control has been saved. Other considerations;
The application uses master pages. We make extensive use of ajax and the ajaxtoolkit in the application. I am using Visual Studio 2010 and .Net 4 The issue - when first entering the page, one can enter data into the first textbox and press the enter key. Data from "current" user control is correctly saved and focus is correctly moved to the next user control on the page.
Data can be entered into the textbox of "new" user control and when the enter key is pressed, the data is correctly save. The focus appears to move correctly to the next user control on the page.Data cannot be entered into the textbox of the control. Pressing the enter key will not save the data (because none was entered) but the focus will move to the textbox of the next user control on the page.
Data can be entered into the textbox of the user control. When the enter key is pressed, the data is correctly saved and the focus appears to move correctly to the textbox of the next control on the pageBasically, steps 3 and 4 are repeated until the end of the user controls on the page, alternating between being able to enter data and not. Other items of note When one is able to enter data into the textbox of a user control, one can correctly tab through the textboxes of each user control until the end of the page When one is not able to enter data into the textbox of a user control, pressing the tab key will take the focus to the address bar of the browser.
I created a much simplified example of the scenario described above and was able to consistently reproduce the "bad" focus behavior. All of the ajax toolkit controls and code where stripped out of the sample to rule the toolkit out as a cause. The behavior still occurs without the toolkit.
I am including the code for default.aspx and WebUserControl1.ascx.
[Code]....
[Code]....
[Code]....
[Code]....
View 2 Replies
Apr 24, 2010
I have four controls in a page with update panel.Initially mouse focus is set to first control.when I partially post back the page to server the focus automatically moves to first control from the last focused control from the control I have tabbed down to.Is there any way to maintain the last focus?
View 1 Replies
Sep 13, 2010
Why I am unable to setfocus to my list box if the index > 820
My list box contains 2000 items and the index is not able to set the focus if the index > 820
View 6 Replies
Jul 14, 2010
I have a master page and set it's back ground color in the body tag <body style="background-color:Red">. Now that is fine for the Master page. How do I set the back ground color of the content page to a different color?
View 12 Replies
Jun 30, 2010
Can anyone give me some VB to set focus to a control using the "FindControl" method. MyTextbox.focus() is not good enough because, for instance, I have a textbox called "Username" in the "CreateNewUserWizard" control which is within a Contentplaceholder on a child page so typing in "Username.focus()" does not work on the Page_Load event because Username simply does not have a Focus property.
View 1 Replies
Dec 29, 2010
I have a page that when auto or partial post back happens, focus is set to the address bar rather than the next control. The interesting thing is that when I put an alert in my RadScriptBlock, after the OK is clicked, focus goes to the correct control -or- if I put in an invalid location, focus is returned to the ExpLocation control & when a correct location is input the second time, the tab order/focus command works correctly (see code below).
That has this up top
[code].....
View 2 Replies
Oct 21, 2010
using vb.net/asp.net 2005 after the user clicks on a button in the buttonClick event I am trying to set the focus at the end of the function simply as follows:
[Code]....
However the focus is instead going to another button. The tabIndex property is not set on any controls on the page.
View 9 Replies
Apr 19, 2010
I use a modalpopupextender to show a popup when the user clicks on a button.
<ajaxToolkit:ModalPopupExtender ID="mpe1" runat="server" TargetControlID="statusInfoLb" PopupControlID="statusInfoPanel" DropShadow="false"
OkControlID="okBtn" OnOkScript="onOk()">
</ajaxToolkit:ModalPopupExtender>
<asp:Panel ID="statusInfoPanel" runat="server" Height="185px" Width="454px" SkinID="Panel_Notification2" DefaultButton="okBtn">
The panel has an OK-Button to dispose the popup. It is also possible to click Return to dispose the popup, because the panel has the property DefaultButton="okBtn".
But this only works when the popup has the focus, which is not so from the start. How do I get the popup panel to have the focus when it shows? I would like to use jQuery.
View 1 Replies
Jun 24, 2010
I am not sure how to explain my current issue. Right now I have a Form that spans a couple of pages. I have divided the Form into multiple section as well including a File Upload section, a File Download section, and have an 'Update' button at the bottom of the Form. I also have Error labels within each section, and have an Error label at the bottom of the Form under the 'Update' button.The problem that I am experiencing right now is that when I produce one of these errors, the Form automatically displays the very top of the page. So in other words, if the error message is displayed at the bottom of the Form, the user has no idea unless they scroll all the way down.Is there anyway to keep the application focus at the area where the button is clicked on? This way if the user produces an error, they will see it right away.
View 4 Replies
Nov 4, 2010
Is it possible with easy options in ASP.NET to set the focus at end of text in a textbox-element ? Without JavaScript ?
View 1 Replies
Feb 24, 2011
We have an ASP.NET MVC application which uses lot of JQueries. One of them I found is following:
function (data)
{
updatePoints(function ()
{
$('#point-list>li').last().click();
});
});
This sets the focus to the last point in my list but I think its not good idea because when I click save button to update my intermediate point, it automatically set the focus to last point. I want it to stay on the same point after refresh. Is it possible to do? Is there any property like Current()?
View 4 Replies
Jul 5, 2010
Is it possible to put focus back on a gridview row after that a selection of the row generates a postback?
I'm trying to add an onkeydown handler on the gridview rows in order to use the keyboard for navigation. My problem, I believe, is that after the first postback, the selected cell loses focus, and so the next key stroke is not caught by the cell.
I have the following code
The grid view
<asp:GridView runat="server" ID="gdvPersons" AutoGenerateColumns="false"
onrowcreated="gdvPersons_RowCreated" onselectedindexchanged="gdvPersons_SelectedIndexChanged">
<Columns>
<asp:TemplateField HeaderText="Name">
[Code]....
View 1 Replies
May 31, 2010
I've got a page that posts back constantly and if im on the inputbox thats instide the update panel i loose focus on postback
how would i get it to recognise that im on the textbox in the update panel and keep focus on it.
View 3 Replies
