AJAX :: TabControl Inside FormView Throws Error In Design Time
Dec 9, 2010
I'm trying to use a Tab control with 5 tabs inside a form view, when I view my aspx page in Visual Studio 2008 it displays a error message stating "There was an error rendering the control. Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.properties.Resources.resources" was coreectly embedded or linked into assembly ... " running the site just shows a blank page (as the control isn't rendered).
If I remove the tab control from within the ItemTemplate (or EditItemTemplate) and put it directly onto the page it works fine. Googling for the error suggests the references aren't correct, so I've reset the toolbox, and re-added the reference - this time referencing the file in my Bin folder (not the installation path of the Ajax Toolkit). Still it throws the same error. Finally I've stripped the code out into a page with the bare minimum (no code behind) and it still throws the same error. I'm sure I had this working previously. I'm using Visual Studio 2008 on Windows 7 and I'm using the 3.5 files from Codeplex (AjaxControlToolkit.Binary.NET35.zip) targetting .NET Framework 3.5.
View 2 Replies
Similar Messages:
Oct 9, 2010
How to set the focus on textbox when requiredfield validator error mesage comes to action inside the ajax tabcontrol.The ajax tabcontrol is having 5 tabs.The submit button is in 5th tab .I have reqiredfield validator for textbox in 1st tab.I want to set the focus on textbox if validation fails.Is it possible to get without postback?
View 1 Replies
May 13, 2010
I have created a custom user control and place Ajax editor and override the class of ajax editor to disable few buttons in editor ,
i am getting the following error
unknown server tag on the design time, and iat runtime it is working properly,
View 2 Replies
Apr 23, 2010
The following code listed on the bottom is a dropdown extender contained with a listview insert template. The code works fine however int VS 2008 Debug mode, its throwing the exception:Microsoft JScript runtime error: Sys.InvalidOperationException: Handler was not added through the Sys.UI.DomEvent.addHandler method.If I click ignore or continue, the taret label is properly populated with the appropriate value. Has anybody encountered this and is
<td>
<asp:Label ID="lblTest" style="height:25px;border: solid 1px black" runat="server" Text='<%#Bind("TestCode") %>' Width="90%"></asp:Label>
<asp:DropDownExtender ID="ddExtTestCode" runat="server" TargetControlID="lblTest" DropDownControlID="pnlTestCode"></asp:DropDownExtender>
<asp:Panel ID="pnlTestCode" runat="server" style="display : none; visibility: hidden;">
<asp:LinkButton runat="server" ID="Option1" Text="12345-New York" CommandArgument="12345" OnClick="OnTestCodeSelect"></asp:LinkButton>
<asp:LinkButton runat="server" ID="Option2" Text="45678-New Jersey" CommandArgument="45678" OnClick="OnTestCodeSelect"></asp:LinkButton>
</asp:Panel>
</td>
View 1 Replies
Feb 1, 2011
i create a composite control as can be seen in code below, and add this control to webform, assign FormView1 to the HeaderControlName property, Run the page, the system will generate parse error message :
Cannot create an object of type 'System.Web.UI.WebControls.FormView' from its string representation 'FormView1' for the 'HeaderControlName' property. However, if i don't assign FormView1 in design screen and manually (through coding) assign FormView1 to the custom control on init, it works as expected.
custom control
public class CmdTest : CompositeControl
{
public virtual FormView HeaderControlName
{
get
{
object oObject = ViewState["HeaderControlName"];
return (oObject == null) ? null : (FormView)oObject;
}
set
{
ViewState["HeaderControlName"] = value;
}
}
protected override void CreateChildControls(
{
Controls.Clear();
Button xx = new Button();
Controls.Add(xx);
}
}
webpage.aspx (assign FormView1 in design time, it will generate error)
<Utils:CmdTest ID="CmdTest1" runat="server" HeaderControlName="FormView1" />
webpage.aspx (didn't assign FormView1 in ASPX, but assign it on Init Code, it works)
<Utils:CmdTest ID="CmdTest1" runat="server" oninit="CmdTest1_Init" />
Webpage.aspx.cs
protected void BsCmdTest1_Init(object sender, EventArgs e)
{
CmdTest1.HeaderControlName = FormView1;
}
View 2 Replies
May 18, 2010
just added reference to jquery minified and block ui on my page through scriptmanagerproxy and it throws error on page load.
<asp1:ScriptManagerProxy ID="ScriptManagerProxy1" runat="server">
<Scripts>
asp:ScriptReference Path="~/script/jquery-1.2.6.min.js" />
<asp:ScriptReference Path="~/script/jquery.blockUI.js" />
<asp:ScriptReference Path="~/script/Default.js" />
</Scripts>
</asp1:ScriptManagerProxy>
View 10 Replies
Dec 23, 2015
I have problem with my web form login
<div>
<h1>Konsole - Login</h1>
UserID : <asp:TextBox ID="tb_uid" runat="server" autoComplete="off"></asp:TextBox>
Password :<asp:TextBox ID="tb_pass" runat="server" autoComplete="off"></asp:TextBox>
<asp:Button ID="btn_submit" runat="server" Text="SignIN" />
<br />
[code]...
design code is above and following error occured "WebForms UnobtrusiveValidationMode requires a ScriptResourceMapping for 'jquery'. Please add a ScriptResourceMapping named jquery(case-sensitive)."
View 1 Replies
Feb 27, 2011
I installed Rad Controls. Using that controls, I designed my application pages. At design time, the design is not visible. It shows the following error:
RadTabStrip1Failed to create designer 'Telerik.Web.UI.RadTabStrip, Telerik.Web.UI, Version=2010.1.415.35, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
View 2 Replies
Jan 11, 2010
I have a Tabcontainer which contains formview1 in first tab and formview2 in second tab. I am not able to give Control based where Selectedvalue condition for formview2 datasource. I mean VS2008 is not picking it up automatically when I try to configure where condition. What should I have to do to make formview2 to make it working.
View 3 Replies
Jul 25, 2010
I have a FormView inside a user control, and in the InsertItemTemplate, I have an AsyncFileUpload control, that I would like to to use. On the user side, it seems to work, but it doesn't work on the server side code behind. The HasFile Property is always false, and it doesn't fire the UploadCompleted event either. My UpdatePanel is in the master page.
<asp:FormView
ID="frmAddImage"
runat="server"
DataKeyNames="imageID"
DataSourceID="sqlImages"
Width="100%">
<InsertItemTemplate>
<cc1:AsyncFileUpload
runat="server"
ID="FileUploadImage"
Width="400px"
UploaderStyle="Traditional"
CompleteBackColor="Lime"
ErrorBackColor="Red"
onuploadedcomplete="AsyncFileUpload_UploadedComplete"
UploadingBackColor="#CCFFFF"
/>
View 6 Replies
Jan 20, 2011
I am trying to use a tabContainer and two tabPanels inside a ItemTemplate of a Formview.
As soon I put them in the ItemTemplate I receive the following error on the formView control in design view:
"There was an error rendering the control. Could not find any resources appropriate for the specifie culture or the neutral culture. Make sure AjaxControlToolKit.Properties.Resources.NET4.Resources was correctly embedded or linked into assembly AjaxControlToolKit at compile time, or that all the satellite assemblies required are loadable and fully signed.
I have a scriptManager tag in the master page and an updatePanel in the content page.
View 7 Replies
Dec 23, 2015
I saw the example here [URL]
These work if the textbox is not in formview. I have the textbox which is in the formview. I can't get dynDateTime() to get it working when my textbox is in formview control.
View 1 Replies
May 20, 2010
Server Error in '/MedTegraSL.Web' Application.
Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
Source File:
c:ProductiveTeamsMedTegraPresentationMedTegraSLMedTegraSL.WebMainMaster.Master Line: 16 Assembly Load Trace: The following information can be to determine why the assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' could not be loaded.
[Code]....
Stack Trace:
[Code]....
View 2 Replies
May 13, 2010
I was referred here by MSDN forums hope this is the right place - I have a custom control (:WebControl) that renders web.sitemap in a specific way. While it runs error free and produces the expected result, at Design-Time it complains
[Code]....
and have tried the SiteMapDataProvider Tag with and without the SiteMapProvider
attribute.Does anybody have (a) any experience with this, or (b) any suggestions as to how to track down the problem?
View 3 Replies
Feb 12, 2011
What should be the right way to achieve the following.
I want to use a tabcontrol from the ajax toolkit.
The tabs hold information about persons, so if a person is selected the data on each tab should be loaded for that person.
The first tab should hold the data like name adres and so, the second tab the kind of sports the persons plays and so on..
I also want to be able to add new persons, also again in a tab conrtrol, so how can i achieve to get all of the data from the different tabs for one person and than write it to the database.
View 2 Replies
Apr 14, 2010
I'm trying to use ajax tabcontainer in asp with c#. I write the following code in .aspx but tabcontrol is not displaying when running. Getting no error.
<ajaxToolkit:TabContainer runat="server" ID="Tabs" Height="138px" OnClientActiveTabChanged="ActiveTabChanged" ActiveTabIndex="0" Width="402px">
View 6 Replies
May 14, 2010
i'm developing a ASP.NET web application which uses the AjaxControlkit 3.0.30512.20315. I have a ToolkitScriptManager instance on my master page which has some ScriptReferences in the CombineScripts collection. If i access my default page from 2 differenct clients after an iisreset, i get the following exception
[NullReferenceException: Object Reference not set to an instance of an object.]
System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) +143
System.Collections.Generic.Dictionary`2.set_Item(TKey key, TValue value) +11
AjaxControlToolkit.ToolkitScriptManager.GetScriptCombineAttributes(Assembly assembly) +129
AjaxControlToolkit.ToolkitScriptManager.IsScriptCombinable(ScriptEntry scriptEntry) +148
AjaxControlToolkit.ToolkitScriptManager.OnResolveScriptReference(ScriptReferenceEventArgs e) +415
System.Web.UI.ScriptManager.RegisterScripts() +191
System.Web.UI.ScriptManager.OnPagePreRenderComplete(Object sender, EventArgs e) +113
System.Web.UI.Page.OnPreRenderComplete(EventArgs e) +8698462
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1029
Using .NET Reflector i found out that the GetScriptCombineAttributesmethod access a static dictionary, which is not protected against concurrent access. Either i have a race condition in my code or there is a bug in the AjaxToolkit.
View 2 Replies
Mar 5, 2010
This is my mistake: If I put an AJAX Editor INSIDE a FormView it loses the layout (I see all the icons button disordered and the Editor without background). If I simultaneously put an Editor inside a FormView and externally in the page both works fine and I see both in the right way. I repeat: with another Editor in the page the Editor inside the FormView works fine!!
I think it may depend on the css, so I have tried to modify the "DesignPanelCssPath" and the "DocumentCssPath" of the Editor inside the FormView, but nothing has changed.
View 3 Replies
Jul 11, 2010
I have a Formview in INSERT Mode that is binded to a datatable. One of the colums in my Database called "AppointmentDate" is of type DateTime. On aspx, i have a ajax calender extender control. What I want to do is allow the User to Select the date from the Calender and also enter a time. Basically so they can make an appointment. What is the best way to do this in C Sharp and do i need a time column as well
View 5 Replies
May 29, 2012
Ajax tab change results init of uploadify, So upon tab change FileUploader turn back to its native mode, only allowing one file interaction
View 1 Replies
May 11, 2010
I have a tab control with details about a user. I want to use javascript to change some visuals. It works fine if the control affected are not in the tab container, but as soon as I have the controls in the container it won't work as the tab control renames all it's child controls to something like this: <input name="TabContainer1$TabPanel1$Txt_Name" type="text" id="TabContainer1_TabPanel1_Txt_Name" />
It should be: <input name="Txt_Name" type="text" id="Txt_Name" />
Now my javascript won't work as it can't find the controls. I did try doing this: document.getElementById('<%= Txt_Make.ClientID %>') But then I this error "The Controls collection cannot be modified because the control contains code blocks (i.e.<% ... %>)."
I just need to know how to stop the Tab Container from renaiming the controls, please? I am still searching, but I'm also runnign out of time.
View 2 Replies
Jan 21, 2010
I am having trouble using the asp.net ajax control toolkit's tab control. I have 4 tabs and I am using the update panel.
Inspired by the article : [URL]
I implemented it using asp.net ajax control toolkit tab control.
The issue I am facing now is, when using firefox the tabs does not become responsive. They are frozen.
Frozen means, I cannot click on the tabs to navigate from one tab to another tab.
The version is using is: 3.0.30512.0
View 6 Replies
Oct 20, 2010
This is the sqlDateTime overflow problem again. Background. As I'm sure you know dates must be between 1/1/1753 and 12/31/2999. If you have an empty date field, it throws and exception. So I created a function (below) that solve the problem when attempting to update or insert a record with a date field. Works great.
Public Shared Function MakeDateField(ByVal pasDate As String) As Nullable(Of DateTime)
If IsDate(pasDate) Then
Try
If pasDate <= System.DateTime.MinValue Then
Return Nothing
Else
Return CType(pasDate, DateTime)
End If
Catch ex As NullReferenceException
Return Nothing
End Try
Else
Return Nothing
End If
End Function
So I thought about using a time field. I have the field, have the validator in place and then attempted to test the page. It resulted in my least favorite error message "sqlDateTime overflow".
I can think of several workarounds like adding a date or a fixed date to the time field, or converting it to a string. Each of these is problematic.
IS THERE A BETTER WAY TO UPDATE/INSERT TIME FIELDS.
View 2 Replies
Jan 4, 2011
I'm receiving the following error in DesignMode with the Accordion1 control. Not sure what is causing this. This is my ASP WebApp.Error Rendering Control - Accordion1 An unhandled exception has occurred. Collection was modified; enumeration operation may not execute.Any idea, what causes this error?Code VS 2005 Pro ASP Ajax XP SP3
View 3 Replies
Jan 20, 2010
i am using the combobox ajax control i in design time i am having an error:
there was an error rendering the control. Request is not available in the context.
View 1 Replies
