I saw the example here [URL]
These work if the textbox is not in formview. I have the textbox which is in the formview. I can't get dynDateTime() to get it working when my textbox is in formview control.
Hello all i have this little issue getting this to work, i have a dropdownlist in asp.net inside a formview and jquery cant find the control im guessing because its inside a form, this is what i got and it works on another page without a formviewi get this errorName 'Country' is not declared
[Code]....
I created a .NET user control to work as a DropdownCheckbox and added Jquery to give the sliding and hide effects. The code is as below:
[Code]....
This control works fine in a normal page, but once I put it inside an update panel it doesn't work. Is there a work around or simply I can't use JQuery inside update panel?
i have the following scenario: one formview. when in editmode there is a child formview linked to the other by a column value. i need to take the value of one of the values of parent formview controls and set it to a textbox of child formview in insert mode. I wish to know which event should I use in codebehind to bind both controls? (that escenario will have paging and must keep the binding as if it was master detail)
View 9 RepliesI have download the Ajax Control Toolkit from CodePlex and add the Ajax Control Toolkit to the Visual Studio Toolbox. It shows on the All Windows Forms tab however it can't drag and drop to the web form design view. Basically how it works? I am trying to do a booking module by implement DateTimepicker, however i have no idea how to start.
View 5 RepliesUsing C# and ASP.Net 2005
I want to add the Datetimepicker Control in my web page. I cannot able to find the control in VS 2005
How to get the DateTimePicker Control in VS2005
How to load date in datetimepicker?
Say I have a dateTimePicker. I fill some control from database then how can I fill date into dateTimePicker like this format ("dd/MM/yyyy")?
I have a question about a third-party DateTimePicker control. I've downloaded the dll and paste the appropriate web.config lines. I've put the control into the aspx page. When I load the page an alertbox appears:
No «add verb="GET" path="/JavascriptDateTimeFormat.axd" /» httpHandler.
The control's textbox and the buttons are present but does nothing. Part of my web.config is:
<pages>
<controls>
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="mark" assembly="Mark.Web.UI.WebControls.DateTimePicker" namespace="Mark.Web.UI.WebControls"/>
</controls>
</pages>
<httpHandlers>
<remove verb="*" path="*.asmx" />
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add verb="GET" path="/helpdeskweb/JavascriptDateTimeFormat.axd" type="Mark.Web.UI.JavascriptDateTimeFormat, Mark.Web.UI.WebControls.DateTimePicker"/>
</httpHandlers>
I have a Tabcontainer which contains formview1 in first tab and formview2 in second tab. I am not able to give Control based where Selectedvalue condition for formview2 datasource. I mean VS2008 is not picking it up automatically when I try to configure where condition. What should I have to do to make formview2 to make it working.
View 3 RepliesI have tried to use CreateUserWizard control inside Formview to avoid manual coding. CreateUserWizard control is a member of InsertItemTemplate of FormView control, I have bounded all the input controls inside CreateUserWizard to database fields but when I click on create user button I get following exception
SQLBindParameter not used for all parameters
after getting through some links I got to know that this may be beacause of mismatch between no of ? marks with specified insert paramters.
I have a FormView inside a user control, and in the InsertItemTemplate, I have an AsyncFileUpload control, that I would like to to use. On the user side, it seems to work, but it doesn't work on the server side code behind. The HasFile Property is always false, and it doesn't fire the UploadCompleted event either. My UpdatePanel is in the master page.
<asp:FormView
ID="frmAddImage"
runat="server"
DataKeyNames="imageID"
DataSourceID="sqlImages"
Width="100%">
<InsertItemTemplate>
<cc1:AsyncFileUpload
runat="server"
ID="FileUploadImage"
Width="400px"
UploaderStyle="Traditional"
CompleteBackColor="Lime"
ErrorBackColor="Red"
onuploadedcomplete="AsyncFileUpload_UploadedComplete"
UploadingBackColor="#CCFFFF"
/>
I am trying to use a tabContainer and two tabPanels inside a ItemTemplate of a Formview.
As soon I put them in the ItemTemplate I receive the following error on the formView control in design view:
"There was an error rendering the control. Could not find any resources appropriate for the specifie culture or the neutral culture. Make sure AjaxControlToolKit.Properties.Resources.NET4.Resources was correctly embedded or linked into assembly AjaxControlToolKit at compile time, or that all the satellite assemblies required are loadable and fully signed.
I have a scriptManager tag in the master page and an updatePanel in the content page.
I have a fairly simple form:
[code]....
However, once the update is finished (and I call e.Cancel = true), the LoginView control does not databind its children... so they are all blank. The FormView's viewstate is still fine, as all the rest of the controls outside of the LoginView appear fine. I even handle the FormView_DataBound event and a Trace shows that the FormView is being databound on postback.
Why then is the LoginView not keeping its ViewState/being databound? Here's a sample code snippet showing the flow:
[code]....
I trying to save clients IP address who are submitting the data on my website. I have downloaded an example and implemented. That scrip displays IP address on the webpage. I can submit this to sql table through code behind. Now I want to use same script in FormView and I am unable to bind this with the text box as it is showing an error "The name IPaddress does not exist in the current context". My code is as under :
<script runat="server">
protected void Page_Load(object sender, EventArgs e) {
string IPAdd = string.Empty;
IPAdd = Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (string.IsNullOrEmpty(IPAdd))
[CODE]....
i have a gridview with columns as datetime name status
i need to update the column record , so i used:
<asp:CommandField ShowEditButton="true" ButtonType="Link" EditText="Edit" ShowHeader="true" HeaderText="Edit" HeaderStyle-Font-Bold="true" Visible="true"> <HeaderStyle Font-Bold="True" />
</asp:CommandField>
and in rowediting event:
protected void GrdDynamicControls_RowEditing(object sender, GridViewEditEventArgs e)
{
GrdDynamicControls.EditIndex = e.NewEditIndex;
}
if i hit edit command by default it is showing me oly textbox, but i need datepicker and checkbox to be displayed in edit mode. how to bring that.
How to write code in vb.net to control the Dropdown which is inside FormView EditItemTemplate. FormView named "frmFaultsReg" DetailsView named "lstStatus" Actually what i want to do that there is a textbox inside FormView EditItemTemplate and ItemTemplate to insert Closing date. lstStatus has a value PENDING and CLOSED. If a user select CLOSED from lstStatus then the date textbox named "ClrDateTimeTextBox" should show current date time and to insert into database and if user again selects PENDING from lstStatus then the date textbox should show empty. I think the postback of lstStatus should work but lstStatus is inside the FormView thats why I am unable to hook it.
View 7 RepliesI'm trying to use a Tab control with 5 tabs inside a form view, when I view my aspx page in Visual Studio 2008 it displays a error message stating "There was an error rendering the control. Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.properties.Resources.resources" was coreectly embedded or linked into assembly ... " running the site just shows a blank page (as the control isn't rendered).
If I remove the tab control from within the ItemTemplate (or EditItemTemplate) and put it directly onto the page it works fine. Googling for the error suggests the references aren't correct, so I've reset the toolbox, and re-added the reference - this time referencing the file in my Bin folder (not the installation path of the Ajax Toolkit). Still it throws the same error. Finally I've stripped the code out into a page with the bare minimum (no code behind) and it still throws the same error. I'm sure I had this working previously. I'm using Visual Studio 2008 on Windows 7 and I'm using the 3.5 files from Codeplex (AjaxControlToolkit.Binary.NET35.zip) targetting .NET Framework 3.5.
This is my mistake: If I put an AJAX Editor INSIDE a FormView it loses the layout (I see all the icons button disordered and the Editor without background). If I simultaneously put an Editor inside a FormView and externally in the page both works fine and I see both in the right way. I repeat: with another Editor in the page the Editor inside the FormView works fine!!
I think it may depend on the css, so I have tried to modify the "DesignPanelCssPath" and the "DocumentCssPath" of the Editor inside the FormView, but nothing has changed.
Basically as the title of this thread states, I have a FormView that has a GridView inside it and my ObjectDataSource that populates this grid cannot access the Grid.
The Control Id needs to be the name of the Grid I want to access, however through the 'wizard' the Control parameter drop down cannot 'see' the grid I need, only the FormView that is in.
I have tried numerous ways to get round this and am struggling now..
I've tried the following...
ControlID="FormView.GridView1"
ControlID="FormView.FindControl("GridView1")
ControlID="<%= GetNameOfGrid %>"
and numerous other attempts that also failed that I now cant remember...
I have a Editor control with ID="Editor1" . But i want to retrieve its html content entered by the user in the client side through jQuery .
View 3 RepliesI have the following (abbreviated) code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ItemID" DataSourceID="LinqDataSource1">
<EditItemTemplate>
<asp:DropDownList ID="ddlCategory" runat="server" SelectedValue='<%# Eval("Category") %>'
DataSource="<%# GetCategories() %>" DataTextField="Text" DataValueField="Value" />
</EditItemTemplate>
<ItemTemplate>
<asp:ListView ID="lvParticipants" runat="server" DataSource='<%# Eval("Participants") %>' >
<InsertItemTemplate>
<asp:DropDownList ID="ddlCountry" runat="server" SelectedValue='<%# Eval("Country") %>'
DataSource="<%# GetCountries() %>" DataTextField="Text" DataValueField="Value" />
</InsertItemTemplate>
</asp:ListView>
<ItemTemplate>
</asp:FormView>
When the FormView is in Edit mode, ddlCategory is populated as expected by calling GetCategories(), which returns a List of categories. However, when the ListView is in Insert mode, ddlCountry is empty. I put a break point in GetCountries(), but it never gets called. If I change the name of the method, I get an error. So it recognizes the method at compile time, but does not call it at run time. I'm guessing this is an embedded binding issue of some kind, but I'm hoping someone can save me a lot of time by pointing out the solution.
I have databound GridView in my page and I have a hidden DIV in all rows. Each row contains a Button that I want it to make the DIV visible for me! how can I use that with jQuery?!
here is the code page: <asp:GridView ID="GridView2" runat="server" AutoGenerateColumns="False"
I have a gridview which contains a textbox control. I need to show the calendar for the user to pick the date and certain dates are to be disabled using jquery. I found a post on stackoverflow that talked about how to disable certain dates. I am done with that part, except not sure how to pass the textbox control to this jquery function. Here is the code.
<script type="text/javascript" language="javascript">
function pageLoad(sender, args) {
var enabledDays = ['09/21/2011', '10/05/2011', '10/19/2011', '11/02/2011', '11/16/2011'];
/* utility functions */
function editDays(date) {
for (var i = 0; i < enabledDays.length; i++) {
if (new Date(enabledDays[i]).toString() == date.toString()) {
return [true];
}
}
return [false];
}
/* create datepicker */
$(document).ready(function() {
$('#<%= txtInHomeDate.ClientID %>').datepicker({
beforeShow: springDate,
beforeShowDay: editDays,
dateFormat: 'mm/dd/yy',
buttonImage: 'images/cal.gif',
buttonText: 'Choose date',
firstDay: 1,
buttonImageOnly: true,
showOn: 'both',
showAnim: 'fadeIn',
onSelect: function() { $(this).trigger("onchange", null); }
});
function springDate() {
var defaultMin = new Date();
var defaultMax = new Date();
var Min = defaultMin;
var Max = defaultMax;
// make valid date from hiddenfied value format is MM/dd/yyyy
dateMin = $('#<%= hfStDate.ClientID %>').val();
dateMin = new Date(dateMin);
dateMax = $('#<%= hfEndDate.ClientID %>').val();
dateMax = new Date(dateMax);
if (dateMin && dateMax) {
Min = new Date(dateMin.getFullYear(), dateMin.getMonth(), dateMin.getDate());
Max = new Date(dateMax.getFullYear(), dateMax.getMonth(), dateMax.getDate());
}
return {
minDate: Min,
maxDate: Max
};
}
});
}
<....
<asp:TemplateField HeaderText="In-Home Date">
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
<asp:HiddenField ID="hfStDate" runat="server" Value="09/01/2011" />
<asp:HiddenField ID="hfEndDate" runat="server" Value="11/30/2011" />
<asp:TextBox ID="txtInHomeDate" runat="server" />
</ItemTemplate>
</asp:TemplateField>
Currently, it errors out since the jquery function won't find the txtInHomeDate.
I have a really odd behavior here: I created a little popup dialog in jQuery UI, and in my test HTML page, it works flawlessly. When I click on the button, the popup comes up, covers the background, and remains on screen until I click on one of the two buttons (OK or Cancel) provided.
So now I wanted to add this into my ASP.NET 3.5 app. I wanted to add it to a GridView inside a user controls (ASCX), which is on a page (ASPX) contained inside a master page.The jQuery 1.4.2 and jQuery UI 1.8.1 scripts are referenced on the master page:
<body>
<form id="XXXXXX" runat="server">
<Ajax:ScriptManager ID="masterScriptManager" runat="server" ScriptMode="Auto"> [code].....
Update: OK, one problem is solved - it appears that for whatever reason, the default MS Ajax stuff is adding some kind of an "observer" to my popup dialog and closes it right away after it shows up
So I changed the OnClientClick="showDialog();" to OnClientClick="showDialog(); return false;" and how that doesn't happen anymore - the dialog box pops up and stays there until I click on either of the two buttons (OK and Cancel).
I have a webform which has a textbox called "Branch ID" and onblur of that textbox it shows "Spinner wheel" animation after the field and checks the Branch ID in table for existence using Ajax call and Ajax call returns the text if its available or not and after finishing ajax call it hides the animation. Since I've put update panel before the textbox my jquery code which hide/unhide the spinner animation is not working. here is the code
ASPX
[Code]....
Here is the WebService Code
[Code]....
Now how to hide the animation as jQuery not working inside update panel.