AJAX :: Update Panels, Repeaters And Lists?
Jun 3, 2010
I realise that there are many posts on update panels and repeaters but none that quite solve my problem. I have a page with two Repeaters each inside seperate update panels. They sit next to each other one on the left and one on the right. The left repeater is filled from my database on my page load event. Im am storing the data in a List<> and then binding the list to the repeater. This works correctly and displays all my results. Each item in the left repeat has a button aswell. The button needs toremove the data from the left repeater and place it in the right repeater. I only want the database to be accessed in the Page_Load and then never again during the use of the page, until the data is saved (I have not got to this feature yet). So I have decided to use List<> objects.
View 6 Replies
Similar Messages:
Oct 8, 2010
I have a page that has 3 nested repeaters. For the first two repeaters, the repeater's ItemDataBound event binds the next lower repeater. This works fine for the data that I have, but causes a large amount of data to load all at once on Page_Load. Is it possible to use collapsible panels with nested repeaters in such a way that the data only loads when the user clicks a particular linkbutton?
View 3 Replies
Dec 14, 2010
I am trying to bind data into a dropdown list from c#. I am getting a Null error when trying to enter the data into the DDL's. I am using this code for the front end.
<asp:Repeater ID="RepeaterHardDrives" runat="server">
<HeaderTemplate>
<table border="0" cellpadding="0" cellspacing="0" width="100%"> [code]...
and last but not least the function to setup the dynamic amount of DDL's looks like this
private void PreloadHardDriveRepeater(int intSupportedDrives)
{
int[] intArrDisks = new int[intSupportedDrives];[code]...
I am calling a list of populate functions in a !page.isPostBack if statement and the only one that is not getting the data is this one with the Drown Lists. It gets the number of Rows(18) from the database, but it it throwing a Null error(Object reference not set to an instance of an object.) I have seen quite a few people have been running into this error while googling the problem, however I could not find a solution that worked for me. The PreloadHardDriveRepeater function seems to work fine when run alone it loads the correct amount of DDL's onto the page.
View 1 Replies
Apr 16, 2010
I have a series of GridViews in a Tab Panel - databound to a generic List of Business Objects. The columns in the Gridview are all similar to the following:
<asp:TemplateField HeaderText="Company" SortExpression="Company.ShortName">
<ItemTemplate>
<asp:Label ID="lblCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:Label>
</ItemTemplate>
<EditItemTemplate>
<asp:DropDownList ID="ddlCompany" runat="server"></asp:DropDownList>
</EditItemTemplate>
</asp:TemplateField>
The GridView generates the "Edit" link at the beginning of the row, all the events fire ok. The problem is that the data is getting long. When in 'display mode', it's fine because the GridView control is smart enough to break some text into multiple lines (in particular Project, Title and Worker names can get pretty long). The problem come in editing mode. Drop-down lists DON'T break entries into multiple lines (for obvious reasons). Going into Edit ode on a row in the Gridview can make the Griview expand horizontally to twice the screen size (blowing through the width limits in the Master page and CSS but that's only a related problem).
What I need is something like the ModalPopup - but trying to tie it to an ID in an EditItemTemplate gives me errors when the page renders (because the 'ddlXXXX' doesn't exist at the time). In addition I don't know how to dynamically populate the panel so that I can get a response from it (like the ID of the Company they selected)
.
I'm also trying to avoid javascript and would like this to be a 'pure' aspx/code-behind solution (for simplicity's sake among others).
All the examples I find are of Modal Popups with the panels pre-defined. Even if it (the popup panel) were something like a list of checkboxes, it could be databound to the SortedList I have ready to go and an OK/Cancel button combination to accept or ignore things. I'm just not sure of what goes where.
EDIT: Final solution looks as follows:
<asp:TemplateField HeaderText="Company" SortExpression="Company.ShortName">
<ItemTemplate>
<asp:Label ID="lblCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:Label>
</ItemTemplate>
<EditItemTemplate>
<asp:LinkButton ID="lnkCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:LinkButton>
<asp:Panel ID="pnlCompany" runat="server" style="display:none">
<div>
<asp:DropDownList ID="ddlCompany" runat="server" ></asp:DropDownList>
<br/>
<asp:ImageButton ID="btnOKCo" runat="server" ImageUrl="~/Images/greencheck.gif" OnCommand="PopupButton_Command" CommandName="SelectCO" />
<asp:ImageButton ID="btnCxlCo" runat="server" ImageUrl="~/Images/RedX.gif" />
</div>
</asp:Panel>
<cc1:ModalPopupExtender ID="mpeCompany" runat="server"
TargetControlID="lnkCompany" PopupControlID="pnlCompany"
BackgroundCssClass="modalBackground" CancelControlID="btnCxlCo"
DropShadow="true" PopupDragHandleControlID="pnlCompany" />
</EditItemTemplate>
</asp:TemplateField>
And in the code-behind, lstIDLabor is the generic List of data lines (of which Company is one of the properties that is also a business object) that is bound to the GridView:
Sub PopupButton_Command(ByVal sender As Object, ByVal e As CommandEventArgs)
Dim intRow As Integer
Dim intVal As Integer
RestoreFromSessionVariables()
Select Case e.CommandName
Case "SelectCO"
intRow = grdIDCostLabor.EditIndex
Dim ddlCo As DropDownList = CType(grdIDCost.Rows(intRow).FindControl("ddlCompany"), DropDownList)
intVal = ddlCo.SelectedValue
lstIDLabor(intRow).CompanyID = intVal
lstIDLabor(intRow).Company = Company.Read(intVal)
Case Else
'
End Select
MakeSessionVariables()
BindGrids()
End Sub
View 1 Replies
Dec 15, 2010
I'm looking for a way to use custom ASP.NET validators to validate input, without using UpdatePanels, and without a full postback. The validators do several things - not just length/regex, but some other non-standard stuff as well. Javascript is required for our users, so I don't have to worry about normal users who have javascript turned off. I see several options, but none are ideal:
1) Suck it up and use UpdatePanels. I'm in the "UpdatePanels are evil" group, so I'd prefer not to do this.
2) Without using validation controls, manually validate the fields by passing the values to a PageMethod static method, via jQuery or any other AJAX framework. This would require client and server coding each time I needed to use a validator.
3) Use jQuery (or any other javascript framework) validation for client validation, then if they somehow get by that, have server-code validation controls for full postback. This would require all of the validation rules to be written in javascript as well as C#. I don't care about the full failed postback at this point, because the javascript validation would catch real users who weren't trying to screw me over.
Is there alternative out there for using real CustomValidator controls, with partial postback, C# code only, for validating input without UpdatePanels and without a lot of redundant javascript?
View 3 Replies
Apr 19, 2010
I have a page with 5 buttons on top. I want the area below the buttons to contain an update panel that will display button 1's panel if they click button 1. If they click on Button 2, then I want button 2's update panel to replace the button 1 update panel. Each panel has stuff on it like check boxes and text boxes.
Is there a way to do this? Is there a more efficient way to do this?
View 2 Replies
Jan 5, 2010
i have 3 update panels on the same page with labels that are showing different countdown and i want then to run separate from each other. I've tried to use timer control that triggers each of them separatley with limitations in ontick event., the coutdowns are strating but after a few seconds are stoping and i don't know why.i'm not using scripts. I want to run like those on mafia wars on Facebook when something is done to start one contdown and something else other timer.
View 3 Replies
Mar 13, 2011
I'm using two update panels, and in the Page_Load, I'm calling if (masterPageScriptManager.IsInAsyncPostBack).Is there a way to test where the update came from and only refresh the affected panel?
View 1 Replies
Jan 27, 2010
I have a page that display a record set inside an update panel. There are also a handfull of checkboxes/textboxes that allow filters to be placed. Each checkbox/textbox is set as an async trigger for the update panel and set to autopostback.
If a single checkbox is clicked the whole filter/render process takes roughly 1.5s.
If I check a filter and then several more before the intial postback is complete I get a postback time of somewhere between 20-50s depending how many boxes I've clicked.
I notice (via firebug) when I check a box that triggers an async postback and than another box the original async post back is aborted. And yet it seems like it still executes (or maybe locks?) something on the server.
View 2 Replies
Dec 22, 2010
I have multiple update panels on a page. The page works perfectly in Chrome, Firefox, safari, and opera but it does not work in IE. I am using .NET 4.0.
View 1 Replies
May 11, 2010
i have 4 update panels, and 1 of them updates after a button has been clicked, and the other 3 panels contain other buttons, but what i would like to do is that, when the button is clicked, how would i make it ONLY trigger for that update panel, as it updates the whole page, and is affecting my Textbox on the page, which is also in an update panel. how i could make just that specific panel update, and not all of them?
View 2 Replies
Nov 6, 2010
Suddenly all update panels in my website became unknown elements. They work fine when I run site.
But:
no intellisense in update panel (no properties appear, no tags, like "triggers")
no ID property when I drag updatepanel from toolbox
VS says that I check if webconfig contains reference to System.Web.Extensions
But I have this reference already.
View 8 Replies
Jul 16, 2010
I have 3 updatepanels on my page and I want 2 of them to update when an event is fired. In one of the update panels I have an asp ReoderList.
[Code]....
[Code]....
[Code]....
I've stepped through the code and I can't figure out why it isn't working.
Code]....
[Code]....
View 2 Replies
Jul 26, 2010
I have a web application which has several update panel this page is taking around 2 miniutes to process. Is it a problem with the IE 7
View 4 Replies
Mar 19, 2010
I have a Gridview containing 10 columns and anywhere from 10 to 40 rows and each cell contains either dropdown or input boxes.I also have a calendar control that changes the data displayed in the gridview.Right now I have an outer update panel around the entire gridview and then I have inner update panels around each control, so potentially 400 update panels depending on the amount of rows for each day.The individual control updates happen fairly quickly if I for example change a dropdown etc, but when I change the day and the entire gridview has to refresh it is painfully slow.On average 30-50% of the cells will be manipulated between change of date. What is best practise? Right now it is to slow.
View 2 Replies
Aug 22, 2012
I have two different repeater control which are in two different Update panel.I want to bind one Repeater value with another.But When i am using asyncPostBackTrigger or postbacktrigger it is reloading whole page.
I want to load only load update panel
View 1 Replies
Mar 16, 2011
I use four different update panels, that use the same timer as trigger.
1) Will the 4 update panels create 4 different HTTP requests to the server?
2) I'm using 4 different panels as the controls are located in different parts of the page, is there a way of putting them in the same update panel?
3) Is this a good coding practice?
View 2 Replies
Jan 12, 2010
For example, I have three UpdatePanels on the page. I click a button, and I get pretty long response, that contains all the data for the three UpdatePanels, the viewstate string.
I want to optimize my query and receive response like "ok" or "not ok". How can I do that?
View 1 Replies
Jan 17, 2010
I am going to outline my setup then where i am failing
UpdatePanel1 - Contents : 3 textboxes and AddButton
UpdatePanel2 - Contents : 1 GridView and SubmitButton
AddButton adds new row to DataTable with data from textboxes, binds DataTable to GridView SubmitButton sends data to database. The Adding of a row works to add the row to the gridview, but it won't add a second or third and so on, only adds the 1. SubmitButton belives the DataTable that GridView is databound to is null and won't send anything to the database. How can i get the datatable to persist between the two update panels? Do i use Sessions as my storage location? Page
[Code]....
View 2 Replies
Sep 20, 2010
I've got a single table, with project information and schedule information. To make the data easier to present, I created a tab control with two panels (a detailsview in each). The first tab is for project info, the second tab is for schedule info (again, all fields in the same table). The problem is, if i change info in both tabs, and then hit the update button, only the data from one tab is added to the table. I think this problem is simple to fix, and boils down to the way I have the page organized, but I can't quite figure it out.
I've boiled my code down to the following conceptualized structure:
[code]....
When you click the update button, you return to the listview, but with only the information from your current tab saved. How can I get it to update from both detailsviews?
View 3 Replies
Jun 15, 2010
I have a page with 2 update panels
UpdatePanel1 contains a gridview1 and a standard panel, pnlForms. gridview1 has a linkbutton which is processed in the gridview1_rowcommand
UpdatePanel2 has gridview2.
There is also a Submit button that isn't in either UpdatePanel but may be a candidate to go into its own UpdatePanel. The Submit button is a trigger for both update panels
The behavior I would like is:
1-Initially, all visible except pnlForms and Submit button 2- When linkbutton in UpdatePanel1 gridview1 is clicked, pnlForms and Submit button become visible. 3. When Submit button is clicked, both gridviews should be refreshed, and PnlForms and the Submit button should both become not visible. I believe I may have to put the Submit button in its own UpdatePanel3 but am not sure how to proceed.
In my present code, everything works as desired except Submit button (not presently in any Update panel) is always visible. Assuming Submit button is initialized to not visible, how do I get it to appear when I click the link button in gridview1 and to disappear when it is clicked?
View 1 Replies
Apr 11, 2010
I have a update panel on the ASPX page,When thepage loads the content in the update panel shouldnot load ( Update panel should show the Updatepanel progress control) but after page load update panel contents should load . How do i get this efect.
View 3 Replies
Mar 21, 2011
Is it possible to use an UpdatePanel that has like a few text boxes, and a search button, and then perhaps another UpdatePanel that has a gridview in it to return the results of what was searched. When the user clicks search it hides the boxes, and displays the gridview. Can I do this with UpdatePanels? I am using c# for my coding. Or should I be doing this another way?
View 3 Replies
Jan 19, 2010
As far as I understand UpdatePanels, they should be invalidated separately, i.e. triggerring one UpdatePanel should not touch the controls of the other panel. It does work so for controls outside of any UpdatePanels, however those which are inside ANY UpdatePanel are touched by triggering ANY UpdatePanel:
<form id="form1" runat="server">
<asp:ScriptManager ID="SM1" runat="server"/>
<div>
[code]...
View 1 Replies
Nov 16, 2010
i have the below page and i am racking my brain as to why when i have two update panels do they both get post backs. i can tell cause i have two user controls- one in each panel and they both fire page load events when only the left panel should be posing back and updating itself... or else whats the point of update panels if in reality the entire page is posting back!
<asp:Content ID="StyleContent" ContentPlaceHolderID="Style" runat="server">
<link href="../Styles/ReportWizard.css" rel="stylesheet" type="text/css" />
<div class="clearFix"></div>
<div class="wizardContainer">
<asp:UpdatePanel runat="server" ID="pnlWizard">
[Code].....
View 2 Replies
