i have 3 update panels on the same page with labels that are showing different countdown and i want then to run separate from each other. I've tried to use timer control that triggers each of them separatley with limitations in ontick event., the coutdowns are strating but after a few seconds are stoping and i don't know why.i'm not using scripts. I want to run like those on mafia wars on Facebook when something is done to start one contdown and something else other timer.
I have two different repeater control which are in two different Update panel.I want to bind one Repeater value with another.But When i am using asyncPostBackTrigger or postbacktrigger it is reloading whole page.
I've got a single table, with project information and schedule information. To make the data easier to present, I created a tab control with two panels (a detailsview in each). The first tab is for project info, the second tab is for schedule info (again, all fields in the same table). The problem is, if i change info in both tabs, and then hit the update button, only the data from one tab is added to the table. I think this problem is simple to fix, and boils down to the way I have the page organized, but I can't quite figure it out.
I've boiled my code down to the following conceptualized structure:
[code]....
When you click the update button, you return to the listview, but with only the information from your current tab saved. How can I get it to update from both detailsviews?
My issues here is that this does not compile. I get "A control with ID 'LinkButtonRemove' could not be found for the trigger in UpdatePanel 'UpdatePanelFiles'." What I am trying to do is have two buttons in the item template. One that updates just the ITEM and one that updates the entire DataList. "LinkButtonRemove" is what I want to update the entire datalist. Any ideas on why this isnt working? Or how to do what I want to do?
THE SHORT VERSION: UPDATEPANEL1 -DATALIST --ITEM ---UPDATEPANEL2 ----CONTROLS
I want one control to update the item updatepanel only and the other to update the entire datalist.
I have a update panel on the ASPX page,When thepage loads the content in the update panel shouldnot load ( Update panel should show the Updatepanel progress control) but after page load update panel contents should load . How do i get this efect.
I have a user control, that has an update panel and update progress control in it.
I use this user control in more than 1 location on the same page.... problem is, when ucA posts back, I see the update progress control for both ucA and ucB. I assume this is because it is a user control and the update panel and progress are named the same?
Either way - how do I make it so that the update progress only displays for the proper user control?
I'm looking for a way to use custom ASP.NET validators to validate input, without using UpdatePanels, and without a full postback. The validators do several things - not just length/regex, but some other non-standard stuff as well. Javascript is required for our users, so I don't have to worry about normal users who have javascript turned off. I see several options, but none are ideal:
1) Suck it up and use UpdatePanels. I'm in the "UpdatePanels are evil" group, so I'd prefer not to do this.
2) Without using validation controls, manually validate the fields by passing the values to a PageMethod static method, via jQuery or any other AJAX framework. This would require client and server coding each time I needed to use a validator.
3) Use jQuery (or any other javascript framework) validation for client validation, then if they somehow get by that, have server-code validation controls for full postback. This would require all of the validation rules to be written in javascript as well as C#. I don't care about the full failed postback at this point, because the javascript validation would catch real users who weren't trying to screw me over.
Is there alternative out there for using real CustomValidator controls, with partial postback, C# code only, for validating input without UpdatePanels and without a lot of redundant javascript?
I have a page with 5 buttons on top. I want the area below the buttons to contain an update panel that will display button 1's panel if they click button 1. If they click on Button 2, then I want button 2's update panel to replace the button 1 update panel. Each panel has stuff on it like check boxes and text boxes.
Is there a way to do this? Is there a more efficient way to do this?
I realise that there are many posts on update panels and repeaters but none that quite solve my problem. I have a page with two Repeaters each inside seperate update panels. They sit next to each other one on the left and one on the right. The left repeater is filled from my database on my page load event. Im am storing the data in a List<> and then binding the list to the repeater. This works correctly and displays all my results. Each item in the left repeat has a button aswell. The button needs toremove the data from the left repeater and place it in the right repeater. I only want the database to be accessed in the Page_Load and then never again during the use of the page, until the data is saved (I have not got to this feature yet). So I have decided to use List<> objects.
I'm using two update panels, and in the Page_Load, I'm calling if (masterPageScriptManager.IsInAsyncPostBack).Is there a way to test where the update came from and only refresh the affected panel?
I have a page that display a record set inside an update panel. There are also a handfull of checkboxes/textboxes that allow filters to be placed. Each checkbox/textbox is set as an async trigger for the update panel and set to autopostback.
If a single checkbox is clicked the whole filter/render process takes roughly 1.5s.
If I check a filter and then several more before the intial postback is complete I get a postback time of somewhere between 20-50s depending how many boxes I've clicked.
I notice (via firebug) when I check a box that triggers an async postback and than another box the original async post back is aborted. And yet it seems like it still executes (or maybe locks?) something on the server.
I have multiple update panels on a page. The page works perfectly in Chrome, Firefox, safari, and opera but it does not work in IE. I am using .NET 4.0.
I have web page with multiple update panels on it, each update panel has a detail view which is bound to different data sources, since the data loading takes time so i want that when data from any source is available the update panel shows it, while the other update panel shows a progress panel till data loading is done.
I have set all the update panel to 'Contional Mode' updating and a trigger is set to them against a buttons click event. on button click i load data from Db. hoever, when i click the button all update panel start the progree bar and they load data syncronously, but i want the above secario.
i have 4 update panels, and 1 of them updates after a button has been clicked, and the other 3 panels contain other buttons, but what i would like to do is that, when the button is clicked, how would i make it ONLY trigger for that update panel, as it updates the whole page, and is affecting my Textbox on the page, which is also in an update panel. how i could make just that specific panel update, and not all of them?
Suddenly all update panels in my website became unknown elements. They work fine when I run site.
But:
no intellisense in update panel (no properties appear, no tags, like "triggers") no ID property when I drag updatepanel from toolbox VS says that I check if webconfig contains reference to System.Web.Extensions
I have a Gridview containing 10 columns and anywhere from 10 to 40 rows and each cell contains either dropdown or input boxes.I also have a calendar control that changes the data displayed in the gridview.Right now I have an outer update panel around the entire gridview and then I have inner update panels around each control, so potentially 400 update panels depending on the amount of rows for each day.The individual control updates happen fairly quickly if I for example change a dropdown etc, but when I change the day and the entire gridview has to refresh it is painfully slow.On average 30-50% of the cells will be manipulated between change of date. What is best practise? Right now it is to slow.
Anyone know of a way to read out in a list all of the UpdatePanel Client ID's I have on a page? Basically I need to loop through all controls in the page with a type of UpdatePanel, and display the ClientID for each..
I have four update panels on this page and I am using this
private string LoopUpdatePanel(ControlCollection controlCollection) { StringBuilder sb = new StringBuilder(); foreach (Control control in controlCollection) {
I use four different update panels, that use the same timer as trigger.
1) Will the 4 update panels create 4 different HTTP requests to the server? 2) I'm using 4 different panels as the controls are located in different parts of the page, is there a way of putting them in the same update panel? 3) Is this a good coding practice?
Requirement is:When I click on "Show Modal" button, it should open a ajax ModalPopup with 2 buttons: "Add Node" and "Add Goal"when I click on "Add Node" button, panel 1 should openWhen I click on "Add Goal" button, panel 2 should open.
For example, I have three UpdatePanels on the page. I click a button, and I get pretty long response, that contains all the data for the three UpdatePanels, the viewstate string.
I want to optimize my query and receive response like "ok" or "not ok". How can I do that?
I am going to outline my setup then where i am failing
UpdatePanel1 - Contents : 3 textboxes and AddButton UpdatePanel2 - Contents : 1 GridView and SubmitButton
AddButton adds new row to DataTable with data from textboxes, binds DataTable to GridView SubmitButton sends data to database. The Adding of a row works to add the row to the gridview, but it won't add a second or third and so on, only adds the 1. SubmitButton belives the DataTable that GridView is databound to is null and won't send anything to the database. How can i get the datatable to persist between the two update panels? Do i use Sessions as my storage location? Page
