Is it possible to use this without the update panel?
What I'm trying to acomplish is have a animated .gif run while the code is running and want to know if it's possible to run after a button click.
I have a user control, that has an update panel and update progress control in it.
I use this user control in more than 1 location on the same page.... problem is, when ucA posts back, I see the update progress control for both ucA and ucB. I assume this is because it is a user control and the update panel and progress are named the same?
Either way - how do I make it so that the update progress only displays for the proper user control?
I have update panel , in update panel i have one button control which exposes onlientClick event ( it dosent have click event to do postback to server).
and i have one updateprogress panel. So my problem is though i'm performing operation on client side , internally the async event is firing and making updateprogress panel to act (having rotation gif image) which i dont want , as it rotates for 10-15 sec more even after the operation at client side is done !
I have written a Crystal reports web application, that prompts ths user for parameters and then apply them and exports the report to a folder as .rpt and then display the report.
I prompt the parameters on one screen and then display the report on another page. I have the AJAX update panel and update progress controls in the parameter page. When the user enters the parameters and click on ok, I export the report and then loads the report to a session report document and transfer the user to the second page where the report is displayed. I use the following code to do transfer to the seconds page.
I have excluded the report load and parameter assign code here.
[Code]....
In the second page I have the following:
rptViewer.reportsource = Session("rpt")
My problem is this works one time and then stops working the second. What I found out was it comes to the statement:
Response.Redirect("show.aspx")
But it does not even load the show.aspx page. It stays on the parameter page. There are no errors displayed. I could not see any errors when I debug the application also. And out of the blue it works sometimes. And if I remove the update panel and progress control, my report works all the time.
I am referring below url link for update progress, how can i use if i have multiple update panel in page and how to make it working without mentioning sleep time, like it works update hides when processing complete else it works till execution
[URL] ....
I am trying to set the value of dropdown box thru client side javascript postback function. On client side event I m calling something like __doPostBack('<%=UpdateButton.ClientID%>', month); The update button is inside update panel. When i debug it, i see my code in vb.net to change the selectedindex property, but on screen it shows the old value.
<%
@
Page
[code]...
In a page I have multiple update panels that has timer associated with them to refresh the grids. Issue is that when asynchronous request (update panel) is in progress page do not respond. If use try to click some other link to move he even can not do that until asynchronous request is completed. Is it not possible that user may able to click some other button if he want while update is in process ?
View 16 RepliesI'm having issues posting the code to this article, I apologize if doesn't appear correctlyI have a form that has a service reference, a local entity object and a button to import data from the service reference to the local Entity. The import works perfectly. I just want to pretty up the UI and add a progress bar during the import. I have the entity's gridview in an update panel along with the button. I have a progress control linked to the panel. When I click the button, my animated gif appears correctly. I'd like to have an updating label that shows the current record being imported. I cannot figure out the correct placement of the label and when or how to update it in my code behind. I may not have my update panel or progress control placed correctly either, it works, but I'm not confident on it. In a perfect world, after the import is 100% complete the local entity's gridview should be refreshed.
<asp:UpdatePanel ID="updpnl_Destination" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:Table ID="subTable" runat="server">
[code]...
I try to use Update Panel for the loading of next page using C#. How do I do once the page is loading then update panel will show theprogress
View 2 RepliesI'm using a Update panel in Asp.net. I am having update progress for which I have set a DIV and set a CSS for it.
The issue is when I call it, it will show the Progress bar but I can scroll the window and there are link in grid which I can click.
I want no operation to be done till update progress running ...
We have two update panels on our webpage. Now first update panel is having button cancel. While second update panel is having a file upload control.
Now if the user uploads a file that is going to upload in about 2 mins, and in between, say after 30 seconds the user clicks the cancel button, the upload taking place in update panel 2 should stop.
How do we achieve this ?
I have a panel withitn an updatepanel with some buttons.
When one of the buttons is pressed, I'm updating a different update panel.
The problem is that when I click the button, nothing seems to happen.
If I click the button again , then I see the first update. If I click it again, I see the second update and so on..
I have a wierd issue with the update progress control in ie8. I have a modal popup that loads a pdf in an iframe, then i have a button click that navigates away from the pdf and shows a form in the same modal. All this is wrapped in an update panel, which i have an update progress control associated with. The control shows correctly in ie7, firefox, safari, and chrome. But in ie8 when the async post back is complete the progress indicator does not hide, until I click on the screen or scroll the page, then it hides and the form shows.
View 3 RepliesI have one update panel inside updatepanel i have one dropdownlist .When i change dropdownlist value so as per value button1 which is out of updatepanel not visible =true or false as per dropdownlist value.
View 2 RepliesI have a formview in Edit Mode, within an update Panel all and these arewithin a Modal Pop Up extender.On clicking Formview Update button, I want an image to appear within the pop up.I have put the image within another panel1 and runat server.For some reason the image is not showing on clicking update button.
View 13 Replieshow to catch update panel's request start (before partial updation request is sent to server) and response receive (before update panel is updated) events.
View 1 RepliesI've exempted the irrelevant bits of code. Essentially, I am trying to change the URL of an image control inside of an update panel inside of a custom user control from a function called inside an update panel from my main page. Using UpdatePanel.Update() isn't working: I end up waiting for the next full page POST to occur before all the updates I make to CustomControl from buttons within the main page's update panel are visible. I verified that Update() was being called via the debugger: there are no issues in that department.
Here, you can see Custom Control and the Button declared. The button is in an update panel to avoid giving a full POST and causing the whole page to reload.
<cust:CustomControl runat="server" ID="CustomControl1">
<asp:UpdatePanel runat="server" ID="UpdatePanel1"> <ContentTemplate>
<asp:Button id="Button1" runat="server" OnClick="DoStuff" />
</ContentTemplate> </asp:UpdatePanel>
This control stores images within their own seperate update panels because rerendering the images is very slow (it requires processing arrays of millions of datapoints) and the user only ever needs to modify one image at a time. I'm using Image1 as an example.
[Code]....
i am attempting to use javascript to update the chart, because how i have setup now causes the chart to just disappear. Here is the code i have now: I am calling the chart to page using: on default.aspx
[Code]....
Code on the dataURL_Infrasturcture_Capacity.aspx page:
[Code]....
PROBLEM: So how would i update this using an update panel and timer. Currently when i do it the chart just disappears on update. I believethis is due to the fact that i am calling a dataURL. How would i get this to work javascript?
I am building a system for a school project. I currently have several Update Panels on the page that have many different controls on them. I also have a single Label control that i use to display messages to the user. I would like to have this label within an update panel also but there are literally hundreds of triggers that would require it to be updated and i dont want to type an absurd number of triggers for this one control.Is there a way for me to have this one panel update regardless of what happens?
View 2 Repliesi am confused about the fact that if partial update of dropdowns is possible through Update Panel ,then why we should use asp.net ajax Cascading drop down extender ,that has made same task bit complex by making callback to web services ? what is difference between using update panel and cascading drop down extender ?
View 2 RepliesI have the following function that is trigered from an asp dropdownlist when an item is selected.
[code]....
The script sets a url depending on the selection from the dropdownlist.
It all works ok, but then the update panel updates and the javascript photogallary breaks.
How do I prevent this from happening.
I have a requirement like need multiple update panel in web page and also i want to load only one (targeted one) update panel content when I click button on another update panel.
View 1 RepliesAbove is my code to call a hidden DIV:
[Code]....
And above the html for the DIV:
[Code]....
on Code behind:
[Code]....
Now i was trying to use an UPDATE PANEL, in order to when i click button Save, only the DIV updates. Because the whole DIV is closing when i click on SAVE, even if i put a div in an update panel.
I am having a weird issue with the update panels. I have an update panel in UpdateMode = Conditional . I have a dropdown list and a grid view..the gridview has to be updated ÖnSelectionChanged event on the dropdown.
The issue here is on changing the selection on dropdown, the onselectionchanged event is triggered, new data is grabbed, bound to gridview..but does nt update the update panel even after the updatepanel.update();
[Code]....
when postback occurs due to update panel's child control then in page load event how can i know that it was dut to update panel ?i.e., i want to differentiate between general postback and postback due to update panel's child control in page load event .How is that possible ?
View 10 Replies
