Is there a way where I could update a label control while still doing a postback method?
For example:
while (reading each row of data table) update front-end label text to show errors found in file
I have three panels on a page:
panel_A has a gridView gv1 with PageSize = "5" OnRowCommand = "LoadCompanyInfo" OnPageIndexChanging="gridView_PageIndexChanging1"
Panel_B has gridview gv2 with PageSize = "5"
OnRowCommand = "SelectEmployee" OnPageIndexChanging="gridView_PageIndexChanging2"
Panel_C has labels CompanyID, CompanyName, EFirst, ELast and EMiddle.
Panel_A panel_B and panel_C are in an update panel.
Each row in gv1 is a LinkButton, so if I click on a row, it runs a method 'LoadCompanyInfo' which updates the labels in panel_C and also populates the gridview on panel_B. This part is working fine, when I click on a row in gv1, it updates the labels text in Panel_C and populates gv2 in panel_B. I am having the following issues:
1. When I click on a row in gv2, it makes the labels text in panel_C blank and gv2 also becomes blank, shows EmptyDataText. I expect it to just update EFirst, ELast and EMiddle. in panel_A.
2. When I click on the next page no on gv1 it fires LoadCompanyInfo method first and then goes in the gridView_PageIndexChanging1 event. I expect it to go in the gridView_PageIndexChanging1 event only and show next page in gv1 and not in LoadCompanyInfo, because I am just clicking on page no 2 not row 2.
3. gv1 refreshes on a timer event OnTick = Timer_Tick, and it clears off data in panel_B and panel_C. I want it to just update panel_A.
I guess I will have to set up nested Update panels to accomplish this.
When an asynchronous postback happened inside update panel, another postback happens also for MasterPagenot only update panel embedded page .I want to prevent this MasterPage postback . is this possible ?think like i have a MasterPage and another page which is test.aspx which is content page of MasterPagei have update panel at test.aspxwhen asynchronous postback happens at this test.aspx update panel it also loads
MasterPage Page_Loadi want to prevent this (it should not also load MasterPage Page_Load)
when postback occurs due to update panel's child control then in page load event how can i know that it was dut to update panel ?i.e., i want to differentiate between general postback and postback due to update panel's child control in page load event .How is that possible ?
View 10 RepliesRelated to my previous question which is answered. The deal is, there is an update panel for modalpopup extender that is triggered by a button. The problem is when the form is submitted by a button, this modal popup is seen on the page! I do NOT want this modal popup extender to be seen when the form is submitted.
[Code]....
What i am exactly doing is , i have a collection of Eml files in a folder.I just loop all the eml files and send emails. while looping the files and sending email , i want to show the user like ''File 10 of 100 is sending..blah..blah.." .how i can achive this inside updatepannel.
View 2 RepliesI have a page on which there is a textbox that is in update panel and has text changed event and autopostback=true. On the same page there is a 'Retrieve' button(inside repeater control) outside the updatepanel. Now what is happening is if user inputs data in the textbox and clicks retreive button page_load event is firing twice which is not what should be happening, one time its the partial postback due to the text changed event and second time is the page post back. I would like to restrict the second postback.
View 1 Repliesi have one label out of update panel and one button inside update panel. in button click event i update the label text. when i run the code and click on button then partial postback occur and button click event fire but label value is not change. if i put the label too in the update panel then label value change at the time of button click. i do not understand why label value is not getting updated. suppose if i want that label should stay out of update panel and label value should change at the time of partial postback then how to write the code. i dont want put the label in any update panel.
View 5 Repliesi am using the update panel in my application in that i had added 3 dropdownlists,all of them are having the selectedIndexchange event so, once you select any item in the dropdown list i had to some operation, but the problem is that if i change the any dropdownlist in the update panel all the dropdownlists selected index methods are getting called, but what i was expecting is that when i select any item in first dropdonwlist that corresponding selectindex has to be executed not the other ones, so anybody had experienced this kind of problem let me know?
View 3 RepliesI have a number of cascading dropdownlist controls on a page. The results in dropdownlist2 are dependent on the results in dropdownlist1, pretty basic stuff.
I now would like to eliminate the terrible postback or refresh of the page that occurs after the SelectedIndexChanged event fires on dropdownlist1, is it possible to do that in Ajax?
What I want the results in dropdownlist2 to populate without the obvious refresh of the page.
I have been struggled for a day without success. Also I am not sure is this possible, since I am not too familiar with Javascript. let me know is there a way to fix my problem. Here is my problem:
What I have is a datalist and at each row it contain an UpdatePanel and inside the UpdatePanel there are a button, a slideShowExtender with related controls and a hiddenField. The hiddenField stored a second contextKey value. At page load time the default contextkey already assigned to the slideShowExtender. What I want to achieve is when user clicked the button the slideShowExtender will switch the Contextkey with the hiddenField value so that the SlideShowExtender will display a new set of images.
So far I can make everything work as I want with server side function, which executed when the button onclick. However this will generate a whole page post back, which I want to avoid. So I was thinking of using client side Javascript to do the contextkey assign and then update the updatePanel, but I am not too familiar with Javascript so I can't get it working :(
Here is my current code:
[Code]....
I am having an issue with an update panel, which is still causing the entire page to postback.
I have made sure i have all the correct bits in the web.config, section groups, httphandlers, httpmodules, additonal assemly etc... but it still does not work. I have got it to work in a way,which is why i think i have the config right, because if i take the search panel of and place it outwith the update panel, the go button only postsback the rest of the page not what is inside the updatepanel.
I am using a master page, but the update panel only appears in the content page, within the content tags.
[Code]....
want to do a page refresh when a button inside an update panel is clicked. Is it possible and how?
View 7 RepliesIn one of my webpage, I have a parent window where i have a datalist with 10 rows of images. when i click any image a pop up window(child window) opens.
The child window has a form to be filled by user. Once user fills this form, he will press the save button. Once the save button is clicked, the child window should be closed and the datalist(in the update panel) in the parent window should be refreshed.
This is how I am trying to achieve this. On click of the save button a javascript function is being called of the parent window like this: window.opener.refreshDataList();
in the refreshDataList() function I have written the following code:
{
childWindow.close();
__doPostBack('ctl00_ContentPlaceHolder1_UpdatePanel1', '');
}
This works like a charm in Internet Explorer. However in Mozilla and Chrome it doesnt work. While testing this I added an alert statement ind the refreshDataList() function like this..
{
childWindow.close();
alert("Testing");
__doPostBack('ctl00_ContentPlaceHolder1_UpdatePanel1', '');
}
Once I added the alert statement, It started working in both mozilla and chrome.
So I realize that It could be an issue related to focus. I have done window.focus()
but still its not recieving any focus and not working in Mozilla and Chrome.
add new row in gridview programmatically without postback (using update panel)?
View 7 RepliesHoping I have placed my question in the correct forum.
I am writing an application that simply updates a text box (contained in a AJAX UpdatePanel) via a thread. the eventual idea being that the textbox will be placed in the master page, and a thread will poll a table to check for status messages. 90% of the code works as it should, the only side that is not working, is physically updating the textbox. The value of the textbox is being updated, but it is not being reflected on the screen. When the text is updated in the textbox, the OnChange event is not firing (as it shouldn't), but I still need the textbox to be updated. The textbox is being updated prgramatically, and not by the user.
When the thread triggers, it just fires an event, which right now just updates the textbox with the current date time. I've tried a million and one different ways, but still no luck :( Anyone know where I am going wrong?
Here is my code:
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" UpdateMode="Always" runat="server">
<ContentTemplate>
<asp:Table ID="Table1" runat="server">
<asp:TableRow>
<asp:TableCell>
<asp:Label ID="lblThread1" runat="server" Text="Thread1"></asp:Label>
</asp:TableCell>
<asp:TableCell>
<asp:TextBox ID="txtThread1" AutoPostBack="true" runat="server"></asp:TextBox>
</asp:TableCell>
<asp:TableCell>
<asp:Button ID="btnstartThread1" runat="server" Text="Start Thread 1" onclick="btnstartThread1_Click" />
</asp:TableCell>
<asp:TableCell>
<asp:Button ID="btnStopThread1" runat="server" Text="Stop Thread 1" onclick="btnStopThread1_Click" />
</asp:TableCell>
</asp:TableRow>
</asp:Table>
</ContentTemplate>
</asp:UpdatePanel>
public partial class _Default : System.Web.UI.Page
{
private static clsThread1 _objObject1 = new clsThread1();
private static Thread _objThread1;
//****************************************
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
_objObject1.UpdateThread1Time += new EventHandler(UpdateThread1TimeEvent);
}
}
//****************************************
private void UpdateThread1TimeEvent(object sender, EventArgs e)
{
this.txtThread1.Text = System.DateTime.Now.ToString();
}
//****************************************
protected void btnstartThread1_Click(object sender, EventArgs e)
{
_objThread1 = new Thread(new ThreadStart(_objObject1.StartProcess));
_objThread1.Start();
while (!_objThread1.IsAlive) ;
}
//****************************************
protected void btnStopThread1_Click(object sender, EventArgs e)
{
if (_objThread1 != null)
{
_objThread1.Abort();
_objThread1.Join();
}
}
//****************************************
}
public class clsThread1
{
public event EventHandler UpdateThread1Time;
public void StartProcess()
{
while (true)
{
UpdateThread1Time(this, EventArgs.Empty);
}
}
}
I've got a page that posts back constantly and if im on the inputbox thats instide the update panel i loose focus on postback
how would i get it to recognise that im on the textbox in the update panel and keep focus on it.
Below is the sample code on using the update panel. The page just has a button and a label. On button click it updates the label with the server time. Though the label is inside the update panel the page goes for a complete postback. in understanding why it is behaving like that. I tried the options of Updatemode, using different script references nothing seems working for this simple application.
-- aspx page
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
It works fine in Firefox but in IE 7 fails doing the postback sometimes. Is it just a problem with my browser? The partial postback inside the update panel works great in both browsers, but when I hit the button outside the panel, the complete postback doesn;t work in IE....
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="PruebaPostBack.aspx.cs" Inherits="Administrator_Treatment_PruebaPostBack" %>
I have a scoreboard kind of application, In which the value of labels in the update panel has to be refreshed every minute.
View 3 RepliesI have a modalpopupextender and I want to be able to update the information without causing a postback and having to re-show the modal, normally I use an updatepanel and this is working in most cases but I have an issue with a repeater where the ItemCommand has been set but clicking the button does not fire anything, unless I set the repeater as a trigger but this then does postback and I lose where I am. Not the usability I want to provide.
View 4 RepliesI have a dynamically generated image placed inside an update panel. The image is generated with the Generated Image control (see here for more:
[URL]. This is basically a specialised httphandler linked to a normal asp:image, where the image src is generated dynamically. In my case, I use some GDI+ to dynamically generate the image, based on values from a database query.
The problem I have is that the image does not update when the update panel updates. The image does, however, update if I manually reload/refresh the page (i.e., hit F5). Why is is that some code fires during an update panel update, and not other code? And, more importantly, what can I do to make sure the image generation code does fire during the updatepanel update?
[Code]....
i have update panel with some wierd ie 7 issue, when you click a a - z link on the below url, after the async postback the linkbuttons disapear until you mouse over, not sure why this is happening.
http://www.countrysideonline.co.uk/a-z-directory/
I am trying to using update panel that have upload file when it click and showing the updateprogress
Here is the design
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdateProgress ID="UpdateProgress1" runat="server" AssociatedUpdatePanelID="upTest">
<ProgressTemplate>
Updating!
[Code] ...
So how I can get the value of the file once the button click?
I have a link button inside an update panel. The problem is the link button on postback is updating the whole page. Tried it with a normal button and the page is not refreshed all. Here's the code.
<asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent">