AJAX :: VS2010 Web App Doesn't Build Release - Could Not Load AjaxControlToolkit Error 89
Sep 6, 2010
I have a VS2010 Web Application that uses the AjaxControlToolkit. I am able to build the Debug configuration. When I build the release configuration I get the following error message: Error 89 Could not load file or assembly 'file:///S:My CodeLibrariesACTMay 2010AjaxControlToolkit.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) S:My CodeEZFishingEZFishingEZFishingSGEN EZFishing
The location of the file is correct, and I just downloaded and unzipped there the Ajax CT. I have always built this app correctly before upgrading to VS2010 and ACT May 2010.
View 3 Replies
Similar Messages:
Sep 21, 2010
i use script manager and i do what ever the tuterials say for adding ajax toolkit .
i want to use button confirm extender but when the page wants to load give me this error:
Error: AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the ToolkitScriptManager in AjaxControlToolkit.dll.
View 2 Replies
Mar 3, 2010
I am using AjaxControlToolkit.dll 1.0.20229. For compiling my code in my DotnetNuke module. When I compile our code and upload it on Server Dotnetnuke application which is having latest 3.x version of AjaxControlToolkit.dll. I get following error. I am not compiling my code to a specific version of AjaxControlToolkit.dll.......................
View 2 Replies
May 25, 2010
When I upgraded my Web Deployment Project from VS2008 to the VS2010 beta version, I was able to execute the build locally on my development box. However, when I tried to execute the build on our TeamCity build server, I began getting the following exception:
[code]....
View 1 Replies
Jun 8, 2010
I am getting the following error when I try to build an ASP.NET 4 project in Visual Studio 2010: "Could not load file or assembly 'file:///C:Devproject runkinElmah.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)". I have verified that the dll does, in fact, exist, and is getting copied to the bin folder correctly. I have also tried removing and then re-adding the reference to the project.
The build only fails when I switch the Solution Configuration to "Release". It does not fail when the Solution Configuration is set to "Debug". The only difference between the two configurations (that I know of) is shown in the following Web.config transform, Web.Release.config:
<?xml version="1.0"?>
<configuration xmlns:xdt="[URL]">
<connectionStrings>
<add name="SqlServer" connectionString="" providerName="System.Data.SqlClient" xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
</connectionStrings>
<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />
<customErrors mode="On" xdt:Transform="Replace">
<error statusCode="404" redirect="lost.htm" />
<error statusCode="500" redirect="uhoh.htm" />
</customErrors>
</system.web>
</configuration>
I have tried using Fusion Log Viewer to track down the assembly binding issue, but it looks like it is finding and loading the assembly correctly. Here is the log:
*** Assembly Binder Log Entry (6/8/2010 @ 10:01:54 AM) ***
The operation was successful.
Bind result: hr = 0x0. The operation completed successfully.
Assembly manager loaded from: C:WindowsMicrosoft.NETFrameworkv4.0.30319clr.dll
Running under executable c:Program Files (x86)Microsoft SDKsWindowsv7.0AinNETFX 4.0 Toolssgen.exe
A detailed error log follows.
Pre-bind state information ===
LOG: User = User
LOG: Where-ref bind. Location = C:Devproject runkinElmah.dll
LOG: Appbase = file:///c:/Program Files (x86)/Microsoft SDKs/Windows/v7.0A/bin/NETFX 4.0 Tools/
LOG: Initial PrivatePath = NULL
LOG: Dynamic Base = NULL
LOG: Cache Base = NULL
LOG: AppName = sgen.exe
Calling assembly : (Unknown).
LOG: This bind starts in LoadFrom load context.
WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().
LOG: No application configuration file found.
LOG: Using host configuration file:
LOG: Using machine configuration file from C:WindowsMicrosoft.NETFrameworkv4.0.30319configmachine.config.
LOG: Attempting download of new URL file:///C:/Dev/project/trunk/bin/Elmah.dll.
LOG: Assembly download was successful. Attempting setup of file: C:Devproject runkinElmah.dll
LOG: Entering run-from-source setup phase.
LOG: Assembly Name is: Elmah, Version=1.1.11517.0, Culture=neutral, PublicKeyToken=null
LOG: Re-apply policy for where-ref bind.
LOG: Where-ref bind Codebase does not match what is found in default context. Keep the result in LoadFrom context.
LOG: Binding succeeds. Returns assembly from C:Devproject runkinElmah.dll.
LOG: Assembly is loaded in LoadFrom load context.
View 2 Replies
Sep 23, 2010
Server Error in '/AJX' Application.
Parser Error
Description:
An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'AjaxControlToolkit.dll' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
[No relevant source lines]Source File: none Line: 0 Assembly Load Trace: The following information can be helpful to determine why the assembly 'AjaxControlToolkit.dll' could not be loaded.
[Code]....
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3614
View 4 Replies
Aug 12, 2010
I am using Ajax on a Sharepoint 2007 website and I have copied in the AjaxControlToolkit.dll into the bin folder.
Method CreateModalUpdateProgress Details Could not load file or assembly 'AjaxControlToolkit, Version=1.0.20229.20903, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e' or one of its dependencies. The located assembly's
manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) Stack Trace MyWebParts. HelperClasses. WebPartControlFactory. CreateModalUpdateProgress (Control controlToAddTo) MyWebParts. BaseClasses.
BaseWebPart. CreateChildControls()
Please contact a system administrator and provide them with these details
View 3 Replies
May 19, 2010
I have few confusions about build. What is release build and debug build? What are the output files for these builds? I had seen debug and release folders in bin folder. So the respective output goes into the respective folder? elaborate release and debug build. I dont want the difference.
View 3 Replies
Feb 11, 2010
I received the following error message. After googling I cleared the ASP.net temp files
The error messwsage is: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020)"
View 6 Replies
Mar 10, 2010
We have an ASP.Net MVC solution built in VS2008 and TFS2008. We use TFS Build and use Continuous Integration.We have a deployment pipeline that enables us to progress a build, eventually, to our live site...
Internal Dev (immediate deployment following a build)
External Dev (used by internal testers to make sure it works on the production server)
External Test (used by our client to test themselves)
Live (self explanatory).
I have 2 questions relating to thisWhich ones of these should be built in Debug and which in Release?How should I write my TFSBuild.proj files to cope with this strategy?
View 1 Replies
Mar 11, 2011
I have the following nant task:
[code]
this is used when loading certain assets (swf files) by being appended as a querystring parameter and ensures that when debugging a cached version isn't received but is manageable once released.
However, after what I believed should be compiling a relase build, the version is still being set as a Guid indicating I'm not achieving a release build yet. I've checked the web.config and the value of debug is changed to false so I'm assuming I'm missing some setting in the aspnet_compiler.exe arguments, but I cant find anything which indicates such in the documentation.
View 1 Replies
Apr 16, 2010
I wish to compile my asp.net MVC application using aspnet_compiler.exe from the comandline to speed up cold startup.
I'm wondering how it determines if it should do a release or debug build. Is it always release? Does it depend on what the web.config file says when you run aspnet_compiler.exe?
What happens to an application that's been compiled w/ aspnet_compiler.exe if someone changed the debug attribute in the web.config file after it has been published?
View 4 Replies
Mar 19, 2010
I am working on an ASP.NET web app using Visual Studio 2008 and a third-party library.
Things are fine in my development environment. Things are also good if the web app is deployed in Debug configuration. However, when it is deployed in Release mode, SerializationExceptions appear intermittently, breaking other functionality.
In the Windows event log, the following error can be seen:
"An unhandled exception occurred and the process was terminated.
Application ID: DefaultDomain
Process ID: 3972
Exception: System.Runtime.Serialization.SerializationException
Message: Unable to find assembly 'MyThirdPartyLibrary, Version=1.234.5.67, Culture=neutral, PublicKeyToken=3d67ed1f87d44c89'.
StackTrace: at System.Runtime.Serialization.Formatters.Binary.BinaryAssemblyInfo.GetAssembly()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.GetType(BinaryAssemblyInfo assemblyInfo, String name)
at System.Runtime.Serialization.Formatters.Binary.ObjectMap..ctor(String objectName, String[] memberNames, BinaryTypeEnum[] binaryTypeEnumA, Object[] typeInformationA, Int32[] memberAssemIds, ObjectReader objectReader, Int32 objectId, BinaryAssemblyInfo assemblyInfo,
SizedArray assemIdToAssemblyTable)
[code]....
Using FUSLOGVW.exe (i.e., Assembly Binding Log Viewer), I can see the problem is that IIS attempts to find MyThirdPartyLibrary in directory C:windowssystem32inetsrv. It seemingly refuses to look in the bin folder of the web app, where the DLL is actually located.
View 3 Replies
Mar 12, 2010
All my web applications are using AjaxControlToolkit 1.0 version. But I have one third party website that is using AjaxControlToolkit 3.5. When I run that third party website I got the following error.
The type 'AjaxControlToolkit.DropDownExtender' exists in both 'c:WINDOWSassemblyGAC_MSILAjaxControlToolkit3.5.11119.20050__28f01b0e84b6d53eAjaxControlToolkit.dll' and 'c:WINDOWSassemblyGAC_MSILAjaxControlToolkit1.0.20229.20821__28f01b0e84b6d53eAjaxControlToolkit.dll'
I do have assembly reference at server level web.config
<add assembly="AjaxControlToolkit, Version=1.0.20229.20821, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
View 9 Replies
May 2, 2010
I was working with the previous version of the AjaxControlToolkit (I had the source project in my solution, just in case I needed to debug something) and everything worked ok, now I've downloaded the lastest build (40412) and I've choosen to remove that project and only use the binaries (of 40412). I added this line in the web.config (inside <controls>) to have it prepared for all the pages, and avoid the need to use the @register in each one of them <add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit" tagPrefix="ajaxtoolkit"/>
Now, only have the binaries I think I should used
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
and inside <assemblies> this line
<add assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
I don't know what should I write as PublicKeyToken, I'm getting Cannot resolve symbol 'AjaxControlToolkit' and, of course, my UserControls that use the AjaxControlToolkit are giving me error.
View 13 Replies
Nov 3, 2010
I coverted a VS 2008 project to VS 2010. I then downloaded and installed the AjaxControlToolkit for .net 4. When I run in debug mode I get an the following error. The code worked in VS 2008 .net 3.5. No Source Available There is no source code available for the current location. Call stack location:
AjaxControlToolKitDLL!AjaxControlToolkit.ToolkitScriptManager.OnLoad(System.EventArgs e) Line157
Source file information:
Locating source for 'd:hgactServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs'. Checksum: MD5 {c1 d2 e2 8c cd 4b 65 11 35 53 7f f5 e3 3b 76 58}
The file 'd:hgactServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs' does not exist.
Looking in script documents for 'd:hgactServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs'...
Looking in the projects for 'd:hgactServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs'.
The file was not found in a project.
Looking in directory 'C:Program Files (x86)Microsoft Visual Studio 9.0VCcrtsrc'...
Looking in directory 'C:Program Files (x86)Microsoft Visual Studio 9.0VCatlmfcsrcmfc'...
Looking in directory 'C:Program Files (x86)Microsoft Visual Studio 9.0VCatlmfcsrcatl'...
Looking in directory 'C:Program Files (x86)Microsoft Visual Studio 9.0VCatlmfcinclude'...
Looking in directory 'C:'...
The debug source files settings for the active solution indicate that the debugger will not ask the user to find the file:d:hgactServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs.
The debugger could not locate the source file 'd:hgactServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs'.
View 1 Replies
Apr 8, 2010
trying to get the latest version of ACT I have (3.0.31106) working with a VS 2010 website, targetting .Net 4.0.
I have researched this and can't find a definitive answer.
I was using the AutoComplete Extender with no problems in VS2008 (ACT version 3.0.30512.1).
In creating this new VS2010 website I thought I ought to also check and get the latest version of the ACT.
Now, when running the new website I get the error other people get,
AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the AjaxScriptManager in System.Web.Ajax.dll, or use the ToolkitScriptManager in AjaxControlToolkit.dll.
What is the best approach here? I don't see the point ofusing the ToolkitScriptManager when the website already has the regular v4.0 ScriptManager.
I seem to have resolved this - fingers crossed - by downloading source version 49157 and then opening the .Net4 soultion file and building in VS2010. Then I got the AjaxControlToolkit.dll file from this project for use in my new website. This works fine now (for the autocomplete extender, at least).
View 5 Replies
Oct 29, 2010
I want to disable past dates, so i modified AjaxControlToolkit.dll and named as "Actkit.dll".
View 1 Replies
Mar 17, 2010
I have an ASP.NET 3.5 website application using C# and SQL 2005 running on a web server. Now the application has the ability to create new aspx pages with content and the relative aspx.cs and design.cs pages needed on the fly and store them in the base directory on the server. Think of it as a crued Visual Studio website on the server for admin to click a few options on a page then the new pages are created for them without the need of a web developer. This all works fine and the code is working 100% (for the moment).
My problem now is the following: When i now navigate to this newly created page i get the following error - Parse Error : Could not load type 'Namespace.PageName'
I've looked into the reasoning and microsoft say "These errors occur if the .aspx page contains a reference to a code-behind module and if the application has not been built." Which now makes sense the application does not realise that these new pages are part of its system even though i can navigate to them.How do i get the system to recognise these new pages and rebuild itself accordingly?Now i cannot rebuild the system localy then reupload to the server, this needs to be accomplished on the server by the system, because the site cannot afford to have down time everytime admin decide to add new pages.
View 3 Replies
Nov 18, 2010
I'm developing on an existing software (PLM) with visual studio 2008, a new ascx page.
Microsoft .NET Framework use by the soft is : 2.0.50727.1433 and ASP.NET version use by the soft is : 2.0.50727.1433 too.
On my server, I've installed Framework 3.5 and I use Ajax Control tool kit version 3.5.40412.0.
I've got a similar problem than other people, but I can't find any solution.I've got the Error message when I want to load a page : CS1705: Assembly AjaxControlKit version 3.5.40412.0 [...] use System.Web.extensions Version 3.5.0.0 [...] which have a higher version than Assembly System.Web.Extensions Version 1.0.61025.0
On my server in folder C:windowsAssembly, I have System.Web.extensions Version 3.5.0.0 and System.Web.Extensions Version 1.0.61025.0 so in theory it can work no ?In my webconfig file I try to add this code :
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions" publicKeyToken="31BF3856AD364E35"/> [code]....]
View 2 Replies
Feb 23, 2010
I'm doing the samething in my two differents pc.
1) Windows 7, vs2010 rc, mvc 2rc2, .Net 3.5
2) Winodws xp, vs2008, mvc 2rc2, .Net 3.5
My Hosting is in GOdaddy IIS 7, .Net 3.5.
I created a new project in both computers, i build it, i copied the 3 dll's files in the bin folder (System.Web.Mvc, System.Web.Routing, system.Web.Abstractions), and i publish them...., i go to my website [URL] both same problem "Page Not Found"
I tried many blogs...many advices...nothing yet...
View 9 Replies
Sep 24, 2010
I am a bit new to ASP.Net Ajax and as such new to Ajax itself. I have a site which uses ASP.Net Ajax. It used the version AjaxControlToolkit version 3.0.30512.0. I have now changed it to version 3.5.40412.2 by deleting the old reference and adding a reference to the latest one . I build the soultion and everything appears fine witjhout any errors. But the site fails to load showing a yellow page with the message AjaxControlToolkit Version="3.5.40412.2" missing reference to 'AjaxControlToolkit.ExtenderBase.Base Scripts.js.BaseScripts.js'. What does this mean ?
View 2 Replies
Feb 12, 2010
I have my website, it's running fine on my machine, but when I upload it to a server I get this error Server Error in '/' Application. Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The system cannot find the file specified. Source Error:
[Code]....
Line 2: Line 3: Line 4: <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit"Line 5: TagPrefix="cc1" %>Line 6:
Source File: /epg/Default2.aspx Line: 4
Assembly Load Trace: The following information can be helpful to determine why the assembly 'AjaxControlToolkit' could not be loaded.
[Code]....
WRN: Assembly binding logging is turned OFF.To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.Note: There is some performance penalty associated with assembly bind failure logging.To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog]. Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.4028 That's the web page. Now I have
AjaxControlToolkit.dll
System.Web.Extensions.Design.dll
System.Web.Extensions.dll
AJAXExtensionsToolbox.dll
in my BIN folder.
View 2 Replies
Jan 14, 2011
Im am getting the following error:
Microsoft JScript runtime error: AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the AjaxScriptManager in System.Web.Ajax.dll, or use the ToolkitScriptManager in AjaxControlToolkit.dll.
I am using ASP.Net 4 and the AjaxControlToolkit .net 4 dll. On my page I am using the ToolkitScriptManager.What I don't understand is that it works without any issue on my development machine in Visual Studio and if I publish it to IIS on that machine. If I run it on another machine I got it also works without any issue. When I copy the published application to my web hosting provider, I am getting this issue.I was getting a SecurityException initially when the site loaded the AjaxToolkit assembly, but now that seems to have just gone away, but I still get this issue.
View 4 Replies
Mar 22, 2010
I am getting the above error, but i am not sure whats wrong with my code.
[Code]....
View 2 Replies
