It was supposed (in sample bellow) to see in browser, when user click button, a list with 4 itens, but I can see only a Blank TextBox and a Button.
What I´m doing wrong?
By the way, I´m using:
[Code]....
I have set the Dropdownstyle to DropDown but its still not highlighting the item in the list
<ajaxToolkit:ComboBox ID="cmbstudentid" runat="server"
AppendDataBoundItems="True" AutoPostBack="True"
Font-Names="Tahoma" Font-Size="Small" [code]....
I have this combobox and I cannot reduce the size and width of the combo list.
on the pic 1 is Height and 2-3 is the width.
I'm try to add a combobox to my form which i have done and populate it with the infomation i need but i want to stop the user from being able to edit the first 5 character in the textbox part of the combo box( 1 is this possible 2 am i going about it in the right way).
I have 3 columns fro a db to enter ips ie 123.456.7.89 at the start if each number i want (SE1)(SE2)(SE3) which i can do at the momment . So I get in the combobox list 3 items with (SE1)123.456.7.89 OR just (SE1) depending of i a result is returned from the DB. However i don't want the user to be able to edit out the (SE?) part of the sting in the textbox. When editing i've tried used the text change event to try and capture the change and make sure the string.length > 5 , but the event does not fire also when i leave the combobox it it adds to the combox list. If I refersh it goes back to how it should be with only the 3 items.
i have a combobox in form but it is not showing in ie only text box is there .
View 1 RepliesIs there a way to programmatically select the entire string of the selected item in the AJAX Combobox?What I'm trying to do is bascially on a State/City selection.
1. User selects a State from the first combobox. This triggers the City combobox to be populated. The item(0) is "Select One:".
2. I want the entire "Select One:" to be hightlight as if the user had used their mouse and highlighted all the text.
The reason for this that I'd like the user to be able to start typing the city without needing to clear out the "Select One:" manually.
I have a below control in my asp.net page (3.5 framework).
<asp:ListBox ID="OptionSelector" runat="server" SelectionMode="Multiple"
SkinID="CPList" Rows="6"></asp:ListBox>
There are 25 items in the list. I have selected one item at the time of project creation. But If I edit the project then the list box is showing more selected items instead of one item in the details page.
With the following code I create a combobox in a panel which is in the pane of an accordion panel.
[Code]....
Now when I click on the arrow of the combobox, the list is show somewhere else on the page and not where it should be.
It seems the list is not positioned relative to the textbox.
I have the following items bound to my combobox:
Value: 1, Text: SNS
Value: 2, Text: ING
Value: 3, Text: ING
Choosing value 1 results in a SelectedValue of 1
Choosing value 2 results in a SelectedValue of 2
Choosing value 3 results in a SelectedValue of 2
does the combobox has as a disadvantage that the Text has to be unique?
in aspx i written as follows
<ajaxToolkit:ComboBox ID="cmbAddressAlias" runat="server" DropDownStyle="Simple" AutoCompleteMode="Suggest" CaseSensitive="false" AutoPostBack="true" RenderMode="Inline" Width="170px" CssClass="cmbProvince" OnSelectedIndexChanged="cmbAddressAlias_SelectedIndexChanged"> </ajaxToolkit:ComboBox>
it binding correctly(datasource dynamically binded) and it raises event too while changing index but it is not raising event when we manually clearing the combobox text..if currently combobox having text "ASP" then i manually select that entire text and using del key i am deleting but it is not raising event for me.. when i change index it automatically raising event...i need to raise event while combobox is empty...
I'm having some difficulty adding an autocomplete extender to a textbox and getting it working.
I've read through the samples and did a quick search on here, but cannot work out why it isn't working.
In a nutshell...
I've added a textbox onto a page, and added the autocomplete extender along with the AutoComplete page method.
Page
[Code]....
Code Behind
[System.Web.Services.WebMethodAttribute(), System.Web.Script.Services.ScriptMethodAttribute()]
public string[] GetCompletionList(string prefixText, int count, string contextKey)
{
StaffADBLL staff = new StaffADBLL();
DataTable dtStaff = staff.FindStaff(prefixText);
string[] items = new string[dtStaff.Rows.Count];
int i = 0;
foreach (DataRow row in dtStaff.Rows)
{
items.SetValue(row["displayName"].ToString(), i);
i++;
}
return items;
}
I've even tried adding an asmx file, and that doesn't work either.
I get no errors and when I start typing nothing happens, it doesn't even produce a list after 3 characters.
I tried to debug and it doesn't debug through the code, skips it completely.
In my code I have 2 ComboBox DropDownLists, created by the code below. The problem is that when the value of the DropDownlist get changed, the other one value also changes.
public class Translate
{
public string CountryName { get; set; }
public string CountryCode { get; set; }
}
IList<Translate> languages = new List<Translate>();
languages.Add(new Translate("Select", ""));
languages.Add(new Translate("English", "en"));
languages.Add(new Translate("French", "fr"));
languages.Add(new Translate("Spain", "es"));
ddlFrom.DataSource = languages;
ddlFrom.DisplayMember = "CountryName";
ddlFrom.ValueMember = "CountryCode";
ddlTo.DataSource = languages;
ddlTo.DisplayMember = "CountryName";
ddlTo.ValueMember = "CountryCode";
I'm building a web page in Visual Studio 2005 with ASP.Net 2.0, and I'm using the 20229 version of the Ajax Control Toolkit. On the page, I have a bullet list with the displaymode set to LinkButton that is bound in the code behind with a list of names retrieved from a stored procedure. Then I have a PagingBulleted List extender so that you can click on a letter (A, B, C, etc.) and only names that begin with that letter will show. The issue I am having is when I first click on a name in the paged bullet list, the entire bullet list will flash on the screen really quickly then the paged bullet list will show again. This issue can easily be seen with the AjaxControlToolkit source code by editing the PagingBulletedList.aspx sample web page. When you add DisplayMode="LinkButton" to the bullet list in the PagingBulletedList.aspx page, then click on one of the items in the paged bullet list, the entire bullet list will show on screen before showing the paged bullet list.
Also, how can I run some code when a letter in the index of the paged bullet list is clicked? For example, If I return some names and I have A, C, G listed in the index of the paged list, I want to hide portions of the web page when A, C, or G is clicked. Is this possible?
I have two Comboboxes where the second one is dependent upon the first one.
When the SelectedIndexChanged event of the first Combobox fires then the second Combobox will be enabled.
After the event, the second Combobox is enabled but I cannot select the ComboBox item.
EDIT
I use Dev express Tools
First Combo I load in Page_Load Event
I use Server Side code:
protected void ASPxComboModule_SelectedIndexChanged(object sender, EventArgs e)
{
LoadSecondCombo();
LoadSecondCombo.Focus();
}
There is no problem in loading, but I'm unable to select 2nd combo item.
I have a TextBox with AutoPostback="true" and an AutocompleteExtender for the textbox.
My problem is following:
- I type a text in the textbox;
- Autocomplete shows item list;
- If I click out item list (somewhere on the page) - the autocomplete cause postback.
How can I prevent this behaviour?
I need AutoPostback="True" because if I don't select any autocomplete item and press enter in the textbox, it should make search also. And, if search is completed and I change prev text and press enter again, it causes event on the first button in the search result (like Add button) but not on the textbox.
How Can I (Or Is It Possible?) Add Item to Html Combobox ServerSide ?Or Bind It in behind Code in asp.net ?Does My question Clear?
View 1 RepliesI have an AutoCompleteExtender control tied to a textbox. If the user starts typing in it, a drop down pops up displaying the a list with the matching suggestions. If, while the list is being displayed, the user hits the Tab key, the textbox loses focus and its value gets overwritten with whatever choice was highlighted in the list.
The problem is when the user clicks outside the list, I want to achieve the same behavior. It currently keeps whatever the user had typed (before the choice list pops up), but I would like for the textbox to get the value of the last highlighted choice (just as if they hit Tab).
I'm able to capture the event, when the user clicks outside the list, but I can't seem to find how to get to the highlighted value from the choice list.
I have a list with 2 sorts of items. Items that have actual values (1,2,3,4 etc) and items that are like group headings so all their values are set to 0. If someone decides to select a group heading - which has a value of 0, is it possible to redirect them to my 'Select an item' item which has a value of ""?
If worse comes to worse, I can just reconstruct the entire list, although if possible I'd like to avoid it.
i use a dropdownlist in a page, with its items taken from a mysql database
i also use autopostback property...my problem here is that, every time i selecct an item, the first item in the list gets seelected
I am designing an user control in ASCX similar to which is shown in the link below [URL] I am using textbox with Div around and image for arrow and a listbox group control for multiselect option and wrote a javascripts to show and hide the listbox when onclick of image arrow. I could achieve everything except when I click on outside the list is not disappearing
View 1 RepliesI am using AjaxToolkit ComboBox in my application
<ajaxtoolkit:ComboBox ID="ComboBox1" runat="server" AutoCompleteMode="Suggest"
AutoPostBack="True" DropDownStyle="DropDownList">
<asp:ListItem>One</asp:ListItem>
<asp:ListItem>Two</asp:ListItem>
<asp:ListItem>Three</asp:ListItem>
</ajaxtoolkit:ComboBox>
On running the application, i see the ComboBox but none of the list items are visible. Clicking on the dropdown button does not show anything also. Accessing the SelectedItem property shows that the first item is selected.
I have a drop down list control populated with items and some code to take the currently selected item value. The problem is I only get the value of the first item in the list regardless of what item is actually selected. Here is my code to populate the drop down:
protected void displayCreateCategories()
{
StoreDataContext db = new StoreDataContext();
var a = from c in db.Categories
orderby c.Name
select new{catName= c.Name,
catId=c.CategoryID};
ddlCategory.DataSource = a;
ddlCategory.DataTextField = "catName";
ddlCategory.DataValueField = "catId";
ddlCategory.DataBind();
}
To get the value of the currently selected item which in my case is always of type integer I do label1.text=Convert.toInt32(ddlCategory.SelectedValue); I get the selected value, but it is always for the 1st item in the list. I'm pulling my hair out over this.
Clicking the label of a drop down list, re-sets the selected value to the first item in the list. This has a history of causing data entry problems when users accidently click on the label.
In the below example ddlContactType has a selected value as 'PRIMARY' and whenever i click on the lblContactType Text, the dropdown box Selected value is changing to "Select One" Text.
How to prevent this one. It should be on PRIMARY Only.
<p>
<tr> <td ><asp:Label ID="lblContactType" Font-Bold="true" Text="Contract Type: *" ForeColor= "red" runat="server" AssociatedControlID="ddlContactType"></asp:Label> </td> <td > <asp:DropDownList runat="server" ID="ddlContactType" DataSourceID="SqlDataSource2" AppendDataBoundItems="true"
DataTextField="TYPE" DataValueField="ID" SelectedValue='<%# Bind("CONTACT_TYPE_ID") %>'>
<asp:ListItem Text="Select One" Value="0" Selected="True"></asp:ListItem>.......
I have a requirement in my application that, while saving the application, need to get all the value from drop down list and pass it to the view model. But application should not allow the user to select more than one item from drop down list manually, ie, only one value at a time. My view model is like ...
public class ListManagement
{
public IEnumerable<selectListItem> InactiveProduct { get; set; }
public string[] InactiveProductSelected { get; set; }
public IEnumerable<selectListItem> ActiveProduct { get; set; }
}
[code]...
I have a master page which has an unordered list in this way:
[code]....
These links are directed to my content pages. I am able to highligt the selected list item on hover and on active.
But I do not understand how I can highlight the selected list item as long as the user is on that specific page/link (current list item). I know that we can specify a seperate body tag and id for each of the content pages and then use CSS to highlight the current list item, but all this code rests already inside a body tag in the master page.