AJAX :: Devloped A Web Application In Visual Studio 2010 Using Framework4.0 And Using Ajax Controls?
Mar 29, 2011"getting following error at runtime on this line 'd:hgactServerAjaxControlToolkitExtenderBaseExtenderControlBase.cs'. "
View 3 Replies
Similar Messages:
AJAX :: How To Use Ajax Controls In 4.0 Visual Studio 2010?
Sep 10, 2010I am trying to use the autocomplete sample in visual studio 2010 Below is my code,
[Code]....
I created an asmx file "AutoComplete.asmx" with the code below in it
[Code]....
This does not seem to work.My questions are.1. is there an updated version of the ajaxcontroltoolkit in .net 4.0 Visual Studio 2010.If there is an updated version, how can i reference it?2. The code above compiles and produces 0 error messages. How can i get it to work in Visual Studio 2010?
[Code]....
Visual Studio :: After Having To Do A Devenv /resetuserdata To Get Visual Studio 2010 Beta 2 Back, AJAX Drag Panel?
Mar 9, 2010Visual Studio 2010 Beta 2 locked up, and when I tried to restart it, it wouldn't load, so I did a devenv.exe /resetuserdata to get it going again. It reset everyhing in my options of the web app/ etc, and now some AJAX conrols don't work such as dragpanel. I assume that it is because something got reset that I haven't enabled again, but can't figure it out.
View 2 RepliesVisual Studio :: Visual Studio 2010 Missing Ajax And No Web.config When Creating New Project?
Sep 28, 2010when i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/
View 13 RepliesAJAX :: Use Toolkit (any Controls) In Visual Studio 2010 ?
Apr 29, 2010How to use Ajax toolkit (any controls) in visual studio 2010 or asp.net 4.0? Currently I drop the control to Desgin form in generate the XML
View 2 RepliesAJAX :: Comet/Reverse AJAX With Visual Studio 2010?
Oct 9, 2010have here a (internal intranet) site where users can preserve places for the lunch and pause... :)Now, meanwhile the users count grows more and more and the ajax site that speeks with a webservice for the calculations und checks geting slower and slower... user 900+The site checks every 5 seconds for the actual state and uses groups for the users.Ok, now i have researched on the web, and found the comet/reverse ajax aproach that the service can push the clients with events.But i have not found any good asp.net tutorial with visual studio (2010) how i can use the asp.net standard controls and vs design mode.Is there a framework for that stuff?
View 3 RepliesAJAX :: Try Ajax Example Under Visual Studio 2010?
Sep 28, 2010insttall visual studio 2010 , I would like to try and learn ajax under vistual studio 2010 , give some advice and usefil link
View 4 RepliesAJAX :: Drag-and-drop, Toolkit Controls Onto A Visual Studio 2010 Design Form?
Mar 13, 2011I installed the AJAX Toolkit (for .NET4) onto a new Toolbox tab in Visual Studio 2010. However, when I try to drag any of these controls onto my Web form in design mode, they won't stick. My mouse pointer changes to 'disabled' (a circle with a diagonal line thru the middle) as soon as it hovers anywhere over my target form. Is there some additional action I need to take to make VS "recognize" these AJAX Toolkit controls?
View 8 RepliesVisual Studio :: Ajax Is Disabled On Visual Studio 2010?
Apr 15, 2010i installed Visual Studio 2010 Trial on Microsoft Site (install successfull)My Computer OS: Windows Server 2008 SP2I create WebApplication Project --> Default.aspx --> Design --> Toolbox --> Oh what ???? The Control ScriptManager is fail and UpdatePanel, ListView... too. :-S
View 3 RepliesTrying To Use Visual Studio 2010 And AJAX Extensions?
Apr 27, 2010Why can I not add ScriptManager control or UpdatePanel to a page in Visual Studio 2010?The drag( or double click) just fails - it seems like there is an incompatibility somewhere?UPDATE:This is 'default' install of 2010 Ultimate on Windows7, create a web application, cannot drag ScriptManager or UpdatePanel to the designer. Typing the declarations works.The cursor changes to the [+] icon when you drag it to the right place but nothing appears to happens on 'drop', briefly the documents name has * appended, this quickly changes back to normal, either is saves or does an undo.I'm assuming something is going wrong so it undos...but what is going wrong?
View 1 RepliesAJAX :: Can Not Use Control Toolkit In Visual Studio 2010?
Dec 24, 2010I have visual studio 2010 ultimate installed on my system. I have downloaded the Ajaxcontrol Toolkit extension 4 for the same and import the dll from tool box. But the tools showing the version 4.1.40412, when I wish to drag drop them to page I could not do that so. I have checked with the default Script manager version and found that it is of version 4.0.0.0
View 4 RepliesVisual Studio :: Ajax Toolkit Not Working In 2010
Jun 5, 2010I have VS2010 ultimate on my win7 64bit system installed. I can't get any of the ajax extensions or toolkit controls rendering on my designer in VS2010. When i try to drag a toolkit control onto the designer surface it just creates <p> xml nodes. This is a similar problem that this person had: [URL]
View 2 RepliesAJAX :: Visual Studio 2010 And Autocomplete Extender?
Aug 25, 2010The AutoComplete Extender control from the AJAX Control Toolkit does not work. It uses a webservice to retrieve data for the Autocomplete functionality.The problem seems to be that the event to call the webservice does not fire I just created a new website in VS 2010 and copied and pasted the AJAX Controltookit Example code for the Autocomplete extender. This works in VS 2008 but not VS 2010Any ideas? suggestions? Some setting in VS 2010 that has to be tweeked.
<asp:TextBox
runat="server"
ID="myTextBox"
Width="300"
autocomplete="off"
/>
<ajaxToolkit:AutoCompleteExtender
runat="server"
BehaviorID="AutoCompleteEx"
ID="autoComplete1"
TargetControlID="myTextBox" ServicePath="AutoComplete.asmx"
ServiceMethod="GetCompletionList"
MinimumPrefixLength="2"
CompletionInterval="1000"
EnableCaching="true"
CompletionSetCount="20"></ajaxToolkit:AutoCompleteExtender>
AJAX :: Not Converted As A Visual Studio 2010 Project?
Dec 16, 2010the problem is that, my web project developed in visual studio 2008 but i converted as a visual studio 2010 project. when i am try to run this project that showing the error message that
[code]...
Visual Studio :: VS 2010: Is There An Ajax Enabled Website Template
Feb 7, 2011Is there an ajax enabled website template?
View 7 RepliesAJAX :: Error Sys.WebForms.PageRequestManagerParserErrorException Visual Studio 2010?
Aug 7, 2010Platform : Visual studio 2010 and mvc 2 In mvc application I used update panel, I am getting following error
Sys.WebForms.PageRequestManagerParserErrorException I have tried all of these1. EnableSessionState="false" ValidateRequest="false" EnableEventValidation="false" 2. EnableSessionState="false" ValidateRequest="false" EnableEventValidation="false" but error is occured again but when try this 3. asp:ScriptManager ID="ScriptManager1" runat="server" EnablePartialRendering="false"/>When I take enablepartialrendering="false" it does refersh page.
Visual Studio :: AJAx Website Template In VS 2010 Ultimate?
May 12, 2010Where is AJAx Website template in VS 2010 Ultimate?
View 4 RepliesAJAX :: Add Script Manager And Update Panel In Visual Studio 2010?
Aug 18, 2010How can we add Script manager and update panel in asp.net in visual studio 2010.
View 3 RepliesVisual Studio :: Trying To Publish Web Application In Visual Studio 2010?
Mar 28, 2011I'm trying to publish my ASP.NET web application in Visual Studio 2010. I'm then trying to install it as a website on a server using IIS. I've gotten my application to publish (to a .zip file) but it points to the physical directory on my hard drive. This obviously will not work on the server.
View 3 RepliesVisual Studio :: Tried To Install Prof 2010 Trail Version In System / 'Please Remove/uninstall Visual Studio 2010 Load Test Controller'?
Jul 6, 2010I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 RepliesVisual Studio :: Why Microsoft Ajax Minifier Dosen't Minifi The File When Used With Team Build 2010
Oct 9, 2010I just used the wonderful tool Microsoft Ajax Minifier and it's working very well when I build my MVC application on my machine but when I check-in in source control and started build by the Team Build 2010 it doesn't create the min files, for sure I can't put the mini files inside the source control as the recommendation from the Microsoft Ajax Minifier because it's like the dll it's generated every time you build your application so no need to put it in source control beside it can't be because you will need always to check-out this file to build and this will prevent other from build using the team build, so what I need to do to make generate the mini file with team build 2010?
View 1 RepliesVisual Studio :: Vwd 2010 Or Visual Studio 2010 Express Offer Integrated Jquery Support?
Jul 15, 2010I'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesMVC :: Is It Possible To Use A Frameset In A Visual Studio 2010 Application
Sep 9, 2010A reply to the following post says not:
[URL]
If it is possible, can anyone point me at an example?
Visual Studio :: Create Web Application In 2010
Sep 14, 2010I have a directory with sources of a web application (developed with visual studio 2008) without solution's files. Now I want to create a new web application in visual studio 2010, whit the existing sources.
View 2 RepliesVisual Studio 2010 - Error When Running Asp 4 Application
Sep 19, 2010I am getting this error, and cant figure out what the issue is.
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: 'JobManager.Contact' is not allowed here because it does not extend class 'System.Web.UI.Page'.
Source Error:
Line 1: <%@ Page Title="Contact" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
Line 2: CodeBehind="Contact.aspx.cs" Inherits="JobManager.Contact" %>
Line 3:
Source File: /Contact.aspx Line: 1
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
The code behind syntax is:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
namespace JobManager
{
public partial class Contact : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
}