Access ASP Rolesprovider From External Assembly
Jan 14, 2011
I have a RolesProvider properly registered and fuctioning. When the ASPX-page is executed I do some of the work in external assemblies (.dll-files referenced in, plain vanilla). I need to access methods on this role provider from the external assembly. How can I do that?
Note: I don't want to pass a reference from ASPX to the external class if possible. Something like "HttpContext.Current.Roles" would be great. Bonus: Shed some light on when and how is the custom ASP.Net RoleProvider used.
View 1 Replies
Similar Messages:
Aug 24, 2010
I would like to have a project that contains all of my Controller logic. I'm not concerned with using Areas, as these are still maintained within the same project. Consider this scenario: I have multiple sites/apps that require the exact same interaction in regards to a particular area, say CRUD ops on a user account. I do not want to create all of the controller logic for one site/app, recreate it again for the next, and make sure that I keep all maintenance to each in sync. I would prefer to keep the controllers in a separate project and reference them from the appropriate site.
I know someone will say that the controller logic is a lot of times specific to the application (as I've read elsewhere), but let's just say that it is guaranteed to be the same. I want to focus on the "how" and not the "why". So far, I've created a class library project with the appropriate references for accessing System.Web.Mvc. How do I proceed with the routing configuration for this? Is this idea even possible? I read a few older articles that were written when Areas were first being introduced that said to create separate projects for them. Is this idea similar to that?
View 2 Replies
Feb 18, 2010
I have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html
Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.
How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)
View 1 Replies
Oct 21, 2010
I'm trying to connect to a webservice but my experiens of webservice i limited
Code]....
The values that I would like to getis:carWorkOrderInfoResult.areaIdcarWorkOrderInfoResult.workOrderNumber
View 2 Replies
Jan 21, 2010
I have an ASP.NET site in a web server and the images are stored in NAS (some kind of lacie external storage), I tried UNC and other things but no success. how can I access images from external storage in ASP.NET Update: The images are reachable from the server but when I try to access in ASP.NET throws me error.
View 2 Replies
Feb 26, 2010
My current solution consists of several Class Libraries and a Website. I'm in the process of globalizing the application and I realized that my resources need to be accessed by all the projects not just the website so placing my resources in the App_GlobalResources folder didn't work.
I added my resources to one my class Libraries and now I'm trying to figure out what the best way of accessing the resources are from my markup. When my resources were in the App_GlobalResources folder I was able to access them by using an expression such as this:
<$ Resources: MyApp.Name %> for server controls Or
<%=Resources.MyApp.Name %> for plain text
What's the best way of accessing my Resources from my website aspx files now that they are in a Class Library DLL?
View 2 Replies
Dec 16, 2010
i have server 2008 and real ip i need to publish the website on this server to allow external access for people what are the steps to host the website on iis7 under windows server 2008 should i configure dns first?
View 4 Replies
Jun 18, 2010
How to protect our web.config file from external access.
I mean some sort of password protection.
View 3 Replies
Jun 13, 2010
Why i can't access MasterPage's public property (MessagePlaceholder) from other Class (Errors) ?Error compiler gives me is "Error 1 The type or namespace name 'MyMasterPage' could not be found (are you missing a using directive or an assembly reference?)"my master page code behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
public partial class MyMasterPage : System.Web.UI.MasterPage
{
public string MessagePlaceholder
[code]...
View 1 Replies
May 11, 2010
how can i access 2 external config files from web.config file.
i have done it for one external file like this in webconfig:
<appSettings file="........">
Now how can i access the second external config file from same webconfig.
View 1 Replies
Sep 24, 2010
I was wondering if you should write code so that external classes and functions of that external class can access the webform controls in the main class???
Or should you only use the external class to process some data, return that data back to the main class (that instantiated that external class object) and then have an internal function in the main class to deliver the data to the control? (back to the screen)
View 2 Replies
Sep 24, 2010
Currently, I have many controls and objects such as Chart1 of mschart as part of the public partial class _Default : System.Web.UI.Page.
At the bottom, I've created a second class that is not part of the _Default webform class. How can I access the webform controls from this second class?
For example, I want to do
Chart1.Series["Series1"].Points.AddXY((pointIndex + 1) * 40, datapoints[pointIndex]);
I want to pass pointIndex integer and the datapoints array.
I know that Chart1 was created protected global access modifier in the designer.cs but when I changed it to public, it still had a problem.
View 7 Replies
Nov 3, 2010
App works well on local intranet, but having problema on external access?
View 4 Replies
Oct 18, 2010
The company whose program we are using developed an API that can be accessed from a web application as well. They provided us with a sample of an ASP.NET application which works fine. When I open the *. Sln file, and then the Default.aspx page (http://localhost:65250/Default.aspx) I don't have a problem using this DLL.
But, when I copy the codes on the server and I try to access the application via web directly, like http://servername/default.aspx, it is telling me that the assembly from this DLL is not registered.
I noticed that when I open this application through *. Sln file, I don't see the BIN folder, but a REFERENCE folder instead.
My question is: how can I register this DLL so I can use it via web directly?
View 1 Replies
Feb 17, 2011
I need to access some data from a custom assembly. This custom assembly is used by an RDLC report in visual studio 2010. The report has its own data source but this is for a special condition. When I use ths code below the the text box on the report throws an error showing #ERROR. Its the database call that is causing the error as I have tested without the call. I have changed the connect string in the sample below to ans it shows the syntax.
View 3 Replies
Feb 14, 2011
I have 2 assemblies with the same name but with different version 1.0.0.0 and 1.0.0.1. I have installed it in GAC and want to use 1 of these versions during run time from my C# application(for e.g - based on locale) in asp.net 2.0.
View 5 Replies
Jan 5, 2011
I've recently upgraded to WIndows 7. When I try to sing the assembly in VS2010 I get an "Access is denied" error. I am logged as admin so I'm puzzled. What service account does VS uses that I should elevate its privilages?
View 1 Replies
Apr 7, 2014
we have test server set up and I am able run the application, but when other users tried to run, they are getting this error
Here is the error
Server Error in '/' Application.
Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. Access is denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. Access is denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be useful to determine why the assembly 'AjaxControlToolkit' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Stack Trace:
[FileLoadException: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. Access is denied.]
System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
[Code].....
View 1 Replies
Oct 11, 2010
i was wondering if visual studio 2010 can be used as an assembly editor too????if yes where do i have to go to create a first blank page for an assembly project?
View 1 Replies
Jul 5, 2010
Before using any class in your website project/page we have to add it's assembly reference to our project. Right?
Now, when I am using SmtpClient class from System.Net assembly after adding the System.Net.Mail namespace in namespace node of application's web.config file but without adding assembly reference to the project, it still accepting and running the code. Why?
I enquired the machine's web.config file located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIG but didnt find assembly reference for System.Net there also.
So bit confused how it is working and where the assembly reference has been added and how?
View 1 Replies
May 2, 2010
I'm getting following warning
Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
What does this mean and how do I fix this?
View 1 Replies
Aug 6, 2010
I'm pretty sure the answer to this question is no, but I just wanted to get some feedback before I go down another path.
Here is my scenario. I have two websites. Website 1 is an internal website that cannot be accessed outside of our domain. Website 2 is an external website that can be accessed outside of the domain, but has access to webservices inside of the domain.
My question is, is there any possible way to display the internal page through the external page without making the internal page external.
View 1 Replies
Jun 3, 2010
I just want to create Shared Assembly and use that assembly in our application.I am using VS 2005.
Step 1
I am trying to build a dll.
Create class library project <TestDllHell>.
Under that project add CalculationArea.cs file.
[Code]....
Then TestDllHell.dll add into GAC successfully.
Now I want to use it in my Website project so did the following steps but unable to view that dll in .Net Reference List Box.
•I go for Run regedit to edit the Windows Registry.
•Navigate to the HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETFrameworkAssemblyFolders key.
•Right click on the AssemblyFolders key, then select New > Key. Enter the name of your assembly (without the .dll extension).
•Double click on the key's (Default) value. The Edit String dialog will appear. Enter the full path of the folder where your assembly resides. Note that all assemblies in that folder will appear in the Visual Studio list.
•IMPORTANT! You must exit and restart Visual Studio to see your assembly in the Add Reference dialog.
My question is that
How can I get that dll in my add reference assembly List .Net section?
And if I modify that dll(TestDllHell.dll) then again register in GAC then version will be different,So how can I told my client application that which dll you choose?
View 3 Replies
Feb 17, 2010
Is there anything missing in IIS 6.0 that prevents me from (Insert into table) using MS-Access?
Explain: The application works fine under Visual Studio 2008 IDE the insert into table works fine with no error, Also I tested with hosting provider and works fine with no problem. but now I have published the same exact app in a dedicated server windows 2003 with
IIS 6.0 .NET framework 2.0 with latest service pack I gave IIS_WPG write/modify access to the folder where MS-Access database is located and database but at the time of insert an error pop-up. I need to install in the Server or settings in the IIS to recognize my MS-Access db is it some office runtime that I am missing. (BTW I am using OLEDB connection string in my C# )
Using System.Data.OleDb;
I can retrieve data off of it with no problem but when I try to insert is when it fails I thought the problem was Access Rights but I do not think is the case.
View 4 Replies
Aug 3, 2010
This is my first steps with XML and I must send a XML by HttpRequest (Which is not a problem to me now). By I've a question about DTDs. According to the HttpRequest destination APIs, I must validate my XML using an External DTD whos located there (this is for Canada Post shipping : [URL]I know how to write / read XML, but not according to DTD... Is there a difference?Can someone tell me how and the easiest way to do that? I've look a good part of good post from Google and there's never what I'm looking for .ADD #1
Note : I know what a DTD for, and I can create one on my own with a plain text editor and basing the XML on the DTD, but I realy mean, is there a way to take advantage of DTD in C# (Creating an object or someting...)DD #2Add-on : Any of you guys already set up an application to talk to Canada Post API using webresque? Because I'm stunk! I send my request with my data and it never finish so never return response ... here is my code :
public oShippingResponse RetreiveShippingCost(oShippingInformations shipInfos) {
// Send request
WebRequest request = WebRequest.Create("http://sellonline.canadapost.ca");
XmlDocument xmlDoc = shipInfos.WriteAsXML();
[code]...
View 2 Replies
