Can Run Multiple Websites Under A Single Membership Database
Jun 8, 2010
I'm trying to plan a series of websites that all share many of the resources such as css/jscript/images/content etc. For this reason I wanted to run all of the websites under the same application and IIS profile, but depending on the URL being used change the masterpage and theme/skin.
The ASP.NET membership database seems as if it was designed with this goal in mind because it allows you to setup multiple applications, however I believe the purpose for which this was built was to allow applications to be run under virtual directories/fodlers, not on seperate urls.
View 2 Replies
Similar Messages:
Mar 30, 2011
There are existing questions that pertain to this subject, but I feel my case may be slightly different(correct me if i'm wrong).
I have two web sites that are almost identical as far as graphics go. They will need only to have a different logo. Additionally I have set up the database so that products can be flagged to show up on either or, or both web sites. Is it possible to set up IIS to point the second web site to the first web site and then have my code determine which domain the request is coming from?
For instance, web site 1 will have domain www.myfirstwebsite.com and the second web site will have a domain like www.mysecondwebsite.com.
If I did go this route I'm guessing I would check in the master page code behinds Page_Load event for the domain and then when I want to display products on my front end I can reference against the variable in the master page.
View 1 Replies
Mar 26, 2010
I have developed an asp.net website. I Have Used Asp.Net membership provider.My Question is , I Have Three Roles , For Eg: Basic, Intermediate, Admin ...Now , i need to apply two roles for single page say basic and admin .... How can i do this ... Plz help me .... Thanx in advance ......
if (Roles.IsUserInRole("Admin") == false)
Server.Transfer("AccessDenied.aspx");
View 6 Replies
Jan 30, 2010
I have two .NET applications X and Y
a. I want to have User A as a common user for both application X and Y.
b. User A can have different roles on X and Y. Eg. Read permission on Y and Write Permission on Y.
How do i configure ASP.NET membership to achieve about functionality.
View 3 Replies
Feb 19, 2010
I am facing a very unique situation and need help. My problem is as follows:1. I have a basic ASP.NET website (3.5 is it helps on IIS 7) where I have implemented Membership for Authentication.2. The site caters to multiple companies (Say Company A, Company B etc.).3. For each company I need to have different database (SQL 2008). This is mandatory as i can use multiple Application in there.Now as far as the flow is concern its pretty simple:1. The user comes to this site with a QueryString like cid=123 (in actual there is a HttpModule for this, cid=123 is just for this forum purpose).2. The site using the cid=123 gets to know this user is for Company A (i have a WCF service for this, how it works is not a problem.), along with that I also get the connectionstring for the database this user should use.3. For Business implementation i have handled this nicely in my DAL Layer.4. The problem comes with Membership.5. In Membership I have writtent a custom provider, that assigns the connection on teh fly.6. But this happens only once for the application. i.e. the connectio string gets cached at application level.7. The connection string does not change untill I reset my IISwhere i can have a single WebSite, catering to different companies, using seperated databases and using Membership for Authorization.
public class CustomMembershipProvider : SqlMembershipProvider
{
public override void Initialize(string name, System.Collections.Specialized.NameValueCollection config)
[code]...
View 1 Replies
Dec 2, 2010
i hv say two website web1 and web2 both hv diff appdata and style sheet,webconfig.how can host this on single url with username and password. suppose for rajeev it redirect to web1 and for ravi redirect to web2.Is it possible todo this kind of thing. India mart did this on their websites. they have various links in thier website. suppose for website web1 they have the [URL] and so on.
View 11 Replies
Feb 19, 2010
[code]....
I am having Table called Interest and has only one column named Answer...
i want the checked values to insert in database..If i select Family, News and Fashion... The inserted data should be in Three rows of answer field..
View 3 Replies
May 13, 2010
i have a countries list. Each user can check multiple countries. Once saved, this "user country list" will be used to get whether other users fit into countries certain user chose.
Question is what would be the most efficient approach to this problem...
I have one, one to save user selection as delimited list like Canada,USA,France ... in single varchar(max) field but problem with it would be that once user from Germany enters page i perform this check on. To search for Germany i would be needed to get all items and un-delimit each field to check against value or to use sql 'like' which again is pretty damn slow...
Just to make sure, many users will have their own selections of countries from which and only they want to have users to land on their page. While millions of users will reach those pages. So the faster approach will be the better.
technology, MSSQL and ASP.NET
View 5 Replies
Mar 23, 2011
I have more of the same applications.All tables are identical.Each application has a new user.These different applications are located in different domains such as.: domena1.com, domena2.com, domena3.com.Each domain has different users.
For each domain in the web.config change the "ApplicationName", eg.:
ApplicationName = domain1, ApplicationName = DOMAIN2, ApplicationName = domain3 ...
View 2 Replies
Aug 4, 2010
i use this to select one checkbox to isselected column how i convert this to multi checkboxlist to single column i use many ways more than 3 days without success
private void BindCheckBoxList()
{
DataTable dt = new DataTable();
SqlConnection connection = new SqlConnection(GetConnectionString());
try
{
connection.Open();
string sqlStatement = "SELECT * FROM boby";
SqlCommand sqlCmd = new SqlCommand(sqlStatement, connection);
SqlDataAdapter sqlDa = new SqlDataAdapter(sqlCmd);
sqlDa.Fill(dt);
if (dt.Rows.Count > 0)
{
CheckBoxList1.RepeatColumns = 4; // set the number of columns in the CheckBoxList
CheckBoxList1.DataSource = dt;
CheckBoxList1.DataTextField = "Name"; // the items to be displayed in the list items
CheckBoxList1.DataValueField = "Name"; // the id of the items displayed
CheckBoxList1.DataBind();
//Setting the Selected Items in the ChecBoxList based from the value in the database
//to do this, lets iterate to each items in the list
for (int i = 0; i < dt.Rows.Count; i++)
{
if (!string.IsNullOrEmpty(dt.Rows[i]["IsSelected"].ToString()))
{
CheckBoxList1.Items[i].Selected = Convert.ToBoolean(dt.Rows[i]["IsSelected"]);
}
}
}
}
catch (System.Data.SqlClient.SqlException ex)
{
string msg = "Fetch Error:";
msg += ex.Message;
throw new Exception(msg);
}
finally
{
connection.Close();
}
}
private void Update(string name, bool isSelected)
{
SqlConnection connection = new SqlConnection(GetConnectionString());
SqlCommand cmd;
string sqlStatement = string.Empty;
try
{
connection.Open();
sqlStatement = "UPDATE handymen SET IsSelected = @IsSelected WHERE Name = @BizName";
cmd = new SqlCommand(sqlStatement, connection);
cmd.Parameters.AddWithValue("@Name", name);
cmd.Parameters.AddWithValue("@IsSelected", isSelected);
cmd.CommandType = CommandType.Text;
cmd.ExecuteNonQuery();
}
catch (System.Data.SqlClient.SqlException ex)
{
string msg = "Insert/Update error";
msg += ex.Message;
throw new Exception(msg);
}
finally
{
connection.Close();
}
}
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
BindCheckBoxList();
}
}
protected void Button1_Click(object sender, EventArgs e)
{
string str = string.Empty;
for (int i = 0; i < CheckBoxList1.Items.Count; i++)
{
if (CheckBoxList1.Items[i].Selected)
{
str = CheckBoxList1.Items[i].Text;
Update(str, CheckBoxList1.Items[i].Selected);
}
}
//ReBind the List to retain the selected items on postbacks
BindCheckBoxList();
}
View 3 Replies
May 7, 2015
Select tbl_name.name,tbl_midname.midname,tbl_last.lastname As name
From tbl_name
inner join tbl_midname on tbl_midname.id=tbl_name.id
inner join tbl_last on tbl_last.id=tbl_name.id
where tbl_name.id='1'
name mid name last name
Pavan Kumar Roy
How to bind all 3 column data in on column.
I need this result
Pavan Kumar Roy
View 1 Replies
May 19, 2010
I have a stored procedure that returns 3 tables within the single recordset it returns. If I set a SqlDataSource to get data from this procedure, it works, but it only returns the first table. I want to have a GridView display the data from the 2nd or 3rd table using a SqlDataSource, but I can't figure out how to specify a particular table.
While there are some posts discussing this out there, I can't get a definitive answer about whether or not this is even possible (?). In a worst-case scenario, I can create another SP that only returns the 3rd table - but that creates a little maintenance headache that I would prefer to avoid.
View 4 Replies
Dec 18, 2010
we are working on a portal which will have multiple websites sites loaded in same container meaning there will be a
1)Top Header showing Portals name and currently loaded app's name
2)left hand side frame having menu which will list applications which are independent of one another.Each of these application is hosted on different servers sharing same DNS name for ex .
i) [URl]
ii) [URl]
3) Righ hand frame ::this is very individual applications pages will load with there own submenu.
Now top header and left hand side menu are common across the applications while the contents in right hand frame will application specific. How can I achieve this using master page ,without requiring indivdual application to have same master page copied in there virtual directory
View 2 Replies
Mar 11, 2011
We have about 50 web-sites, running in different application pools, that read from a common cache database (using Microsoft Enterprise Library Caching application block). We currently have a console application which populates the cache at 3AM every morning. However, we want to get rid of this application and get the cache to automatically refresh expired items, using the ICacheItemRefreshAction interface.
We were going to create our cache object in the Global.asax of each of the 50 web-sites. However, my concern is that if we set a cache-expiration policy in Global.asax, that each of the 50 web-sites will trigger a refresh action, causing the data to be re-cached 50 times. We don't want only 1 web-site to set the expiration policies, as then the 49 other web-sites will have a dependency on that 1 web-site, and that's an architecture no-no.
View 2 Replies
Nov 12, 2010
I was wondering about the best MVC practices for handling multiple websites from one MVC codebase. The functitonallity will pretty much be the same on all five sites, with most differences coming from styling/branding. Is it possible to dynamically set a Masterpage in MVC ? Should this even be attempted? Can everything get handled cleverly with routing?
View 2 Replies
Jun 4, 2010
I have 3 web.configs and 1 web project. I compile it once, and when deploy it, all I do is copy the correct web.config to the correct directory.
This is too complicate to maintain, when I have web.config change I must change all the three.
So, what I want is to keep only one web.config file, for all three websites.
In order of doing so, I have created a new settings.xml file, and I wish to read everything from there instead of te web.config file.
to my questions:
1. I need to remove ConnectionString from web.config to the settings.xml file. How do I change the providers connection string programatically?
[Code]....
Seems like moving the connection string to a different file might be a difficult task:)
2. How programatically can I do what I did on the web.config easily:
[Code]....
View 6 Replies
Apr 14, 2010
I am currently working on a project which involves three different websites with a lot of common functionality. At the moment the common functionality is placed in a different website full of user controls.
The problem is sharing the user controls across the multiple websites. Looking around on SO and other websites, the only solution seems the be using virtual directories. As this is a workable solution (we us this at the moment) it doesn't seem as a "clean" solution.
Which "best practices" exist on sharing common functionality (including the GUI/HTML) between different site?
Is it (for example) possible to create a single Web Application project and deploy subdirectories (each with their own web.config) to different production environments?
View 3 Replies
Feb 1, 2010
We have about 70 sites on our server that use same application (with different Application Pools) and they use for example a shared skin file. So is there a way to load this file to memory and share for all applications? what I mean is to sharing cache in multiple websites to decrease pressure on server.
View 3 Replies
Dec 20, 2010
I have a IIS server in my company which runs our intranet application, We assigned one static IP to it in order to access through internet. when we to mapped our application address eg : http://ip/applicationname to one host name, after loading when i try to access any page it was again showing ip address instead of my host name. When I check with my ISP, he told me that to resolve this either you have to put your application folder in root directory(directly in Inetput/wwwroot) or you have to create sub domain, when I put all my fies to root directory it is working well, but , I found that for all other application which i put the folders inside wwroot are taking the config file from root, how can i resolve it... or just explain me how to configure subdomain in my server to solve this issue....
View 1 Replies
Mar 23, 2011
I just upgraded to windows 4G hosting from old windows hosting on Godaddy. I have hosted multiple websites on this hosting account. The primary domain website [URL] is working fine after the upgrade but all other sites hosted in same account report some errors.
The structure is like this:
Root: inHouseRecipes.com
Root/s/Website1
Root/s/Website2
I have checked that the websites in subfolders are set up as an application in IIS 7. Also, the web.config of parent (root) website has the following
<location
path="."
inheritInChildApplications="false"
>
tag to stop other child web.config to inherit anything from parent.
I use asp.net to code my websites. Before 4G upgrade everything used to work like a charm.
Has anybody else also experiences the same issues? If yes, what are the changes that we need to make to support multiple web sites in same 4G hosting account?
View 5 Replies
Jan 12, 2011
below written question :
1.) What is the name of the OS process in which App Domain resides.
2.)if suppose There are Three Windows application hosted on a same envoirment and two instance is working for each application at a Time, means now total instance are six .what will happen among the below written cases :
a.) There will be six different app domain in a single OS process
b.) There will three app domain(one for each application) in a single OS process and some Parallel thread will be executed in each app domain for another instance.
c.) There will be Three OS process corresponding to each application.
3.) If eveything will remain same except there are three web application in place of windows in point 2, will there be any change in functioning.
View 1 Replies
Aug 18, 2015
I have a question in gridview, I want to combine my two or more records into a single cell with two rowsfor Example i have a ID, Name, Year Start, and Year End for Column name in database and i want call it into my gridview that the Year Start and Year End will combine to Year like:
In Database
ID Name Year Start Year End
1 Yourname 2010 2015
In Gridview:
ID Name Year
1 Yourname 2010 2015
in a year column i want it to two row..
View 1 Replies
Aug 18, 2015
I want to bind three column with one row in gridview in asp.net with c#,
i want like this,
Name | Info
----------------------
name | lastname
| phone number
| address
I get this by default
name | last name | phone number | address
View 1 Replies
Nov 24, 2010
I would like to have several websites that use the same styles, scripts, and App_GlobalResources. What would be the best way to structure my websites (web applications) to use the same files? I also need to share user controls with code behind.
View 6 Replies
Apr 7, 2010
I am working as a trainee in a software company.
I want to implement Single Sign-On in two different applications(different domains).
View 2 Replies
