Configuration :: C# Web Application Works In Debug But Not When Deployed To IIS?
Oct 27, 2010
I know there have been countless posts on these types of problems, and I have read through alot of them as well as doing Google searches, but I have not found anything that applies to my specific situation. If anyone has posted a similar question link me to the post with any appropriate derisive comments . Mods if this is the wrong forum feel free to move the post to the appropriate location.
I am a newbie C# developer. I have been getting my feet wet writing a C# web app for my department. I am using the following system:
Windows 7 Professional Visual Web Developer 2010 Version 10.0.30319.1 .Net framework 4.0.30319. IIS version 7.5.7600.16385 Internet Explorer 8.0.7600.16385CO SQL Server 2008 R2
When I run my application in the VWD debugger everything works fine and looks the way I want it to work. When I deploy to IIS (which is on the same box that I develop on) I start having some issues. Here is a breakdown of the problems I am having:
I have an asp:menu control with orientation set to horizontal. When I initially load the sitre after a deploy the menu displays correctly. But when I go to a different web page in the app the menu switches to vertical and the width of each menu item spans the width of the div that surrounds it. On the same page that causes issues with the asp:menu I also have asp:ComboBox controls that are used to filter information on the page. The combo boxes just look like text boxes. The data that should populate the boxes is not present.
I also have some ajax accordion controls contained in asp:updatepanels, neither of which work. The accordion controls are all expanded, and I cannot collapse them. If I trigger an update the entire page reloads instead of just the specific control.
I do not receive any errors when I browse to the page that causes the problems. It loads just fine everything is just jacked up. Like I said, everything works flawlessly in the VWD debugger. I know the VWD debugger does not use IIS, which makes me think this is an IIS issue, but I do not even know where to start to pinpoint the problem.
for example it just starts notepadn my development pc i'm using Win7 and when i deploy the app onto my local IIS7 it works and i can call notepadWhen i run debug mode with VS2010 it works too!
When I deploy my web service, I get the following error:
There is no build provider registered for the extension '.svc'. You can register one in the <compilation><buildProviders> section in machine.config or web.config. Make sure is has a BuildProviderAppliesToAttribute attribute which includes the value 'Web' or 'All'.
I found one thread ([URL] that a solution but, I can not get it to work. If I make the changes to my web config file as in the thread, I then get a configuration error. One odd thing is that, if I check the machine.config file on my machine, located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIGmachine.config, I don't see any of the config settings described in the thread. As a matter of fact, there is no mention of "compilation" or "buildProviders" at all.
i have written in the "Application_BeginRequest" Method that the header of every HTTP Request will be analyzed.
It only works when i visit the myip/default.aspx site. But when i want to visit any other site there will be no entry in the database or in the listbox (the listbox is only for me to see what happens)It runs on an IIS 5.1.
I also changed in the IIS Settings the ASP.NET from 2.0 to 4.0. Do i need to configure the IIS 5.1 to use the global.asax.cs on every url?
I thought the global.asax.cs runs on every site on the webserver.
We have deployed an application in iis 6.o. We set cache for 1 hr in that application so that the updated data in the back-end will be visible by the user after 1 hr. If the requested data not available in cache it will fetch from database directly.
Is there any way that I can clear this cache in between 1 hr for some of our testing.
Resetting the website and app pool and deleting temp asp.net files didn't work, I have tested that.
I'm trying to deply a 3.5 Net application developed in VS Web Express and built using the asp compiler. This works fine when tested using an eval version of Win 2008 Standard server on a VM. However when installing on a production Win 2008 Standard server it fails with the message can not load assembly as it has not been signed or the signature does not match. How come this works in one and not the other? The live server has symantec AV installed and running? If this the reason? Have a bit of knowledge ( as all devlopers do) of OS's but am totally stumped by this. If I could even replicate it on the development machine would allow me to move forward. Do i need full Vis Studio? Do I need to sign the DLLs?
If same web application is deployed on three different servers, which things we need to take care of and what things should be common amonges all three?
I have to design asp.net application which has to work on kiosk system. I don't know anything about the kiosk system .so, whether the asp.net application will work on the kiosk system are not I don't know. So any ideas and any sample examples will be very useful for me to start thanking on those lines.
System.Runtime.InteropServices.COMException (0x80010001): Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80010001I am getting this error when I publish my Asp.net webfrom on Dev Server. The application opens Outlook 2007 to attach a file through the code. it works fine in local machine and in Dev itself ,but when publish it and try to access it fron the client machine then I am getting the error.
This question kind of follows on froma previous one I posted. I have a .net web site deployed on a server. In certain circumstances the site falls over. Specifically, when I browse to the site from my PC (which has visual studio) to the web server using a particular dns entry. So, I want to debug a browser session on my PC which is looking to a URL on a web server. How can I do this? Within VS when I attach to Internet Explorer no break point is ever reached?
I want to know what are the ways to debug the application after deployment. Let's say I have used x-copy deployment, to copy dll and also some source code files. If I want to modify some source code and recopy them into production. Can somebody tell me how to debug those modified files?
I created a web application (VS 2008 + SP1) and deployed it on my shared hosting with ASP.NET 2.0 support. I started getting errors
could not load type <page class name>
I tried resolving it but it did not work. The hosting provider told me that they have full support of .NET 2.0 framework. I tried a few inline code samples and they worked fine. Then I again deployed a small compiled website project and it also worked fine.
I dont understand. why is that when i deploy a web application project it fails and if i convert the same thing into website project it works.
I have an ASP.NET web application(webforms,not MVC) developed in VS 2008 and i have implemented ASP.NET web forms URL routing by following this link [URL]
It works pretty good when i run it on the Visual studion IDE.But does not works when i created a site under my IIS (IIS 5.1 in XP) and deployed the same files there.I have set ASP.NET version as 2.0 in the Properties window of my application too.But does not work.
I have developped an asmx webservice with visual studio and I deploy on IIS 7 which has 3.5 Framework by copying all the files.
When testing it says
Could not load file or 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I don't use [System.Web.Script.Services.ScriptService] so I don't understand why it tries to load System.Web.Extensions.
Note: I'm not using any other assembly/lib I'm just learning webservice so it's very simple: I create a webservice Test.asmx with one method which uses one class Test.cs within same namespace WebServiceTest. This works locally.
I have a web application in ASP.NET 4.0. I've added an asmx service, primarily as a source for the autocomplete extender's lookup values.
When I debug on my machine locally, everything works fine. However, when I deploy the web application to IIS 7.5, I get a HTTP 404 response when trying to send data to the service.
I am able to browse to the service definition, see the available operations. Tellingly, however, when I use the test pages to test the service using POST, I receive an HTTP 404 again.
I'm not sure what is going on. I did create the asmx file within my web application and it is deployed in the virtual directory of my otherwise working production application. Is there an issue with the .asmx file being deployed in the same virtual directory, perhaps?
This is very strange behaviour from my login control - locally it works fine - But deployed to the web server (With an external hosting company) it gives a windows prompt, even though the authorisation is set to "Forms".Here is my web.config file:
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
i wrote a sending email function that only works on my debug mode(debug local server) when i publishing and hosting C# code that function doesn't work. This is my email configuration function
I have created a webservice to populate bookmark fields in a word document with values passed out from an adobe flex app. The document is based on a .dot template that is held on a share on the server. The aspnet user has read access to the share If i run the asmx on my local machine, it all works fine. If i run the asmx when deployed to the webserver I get an error "cannot create activex component" returned. I have set impersonate = true in the web.config on the webservice that is deployed on the server. The code for the webservice itself is very simple:
[Code]....
I have also checked that the microsoft.office.interop.word is in the gac on the server (i am using office 2003). I really don't understand what the issue is, obviously for the application to go live the webservice will have to be deployed to the server and I am happily calling other webservices that exist on the server from my flex application with no issues.
I'm building a site using the .NET 4 framework using routing and MasterPages.
Because I'm using both routing and MasterPages, I can't see any way how to get value from control on the previous page. To solve this I've used the code behind to store the control's value in a session variable. Is there a way to retrieve a value from a control using PreviousPage or something when using Routing and MasterPages?
This works fine in VWD debug mode and in IIS 5.1, but when I try to deploy it on my Windows Server 2008 (IIS7.5) machine, it get this error:
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
This may be a dumb question, but I've got a DLL that I compile and reference locally in a web site project and everything runs just fine. When I deploy this solution to the test server, I get an "Object reference not set to an instance of an object." error and the stack trace displays the files with their paths that are causing the error. The thing is, the paths being displayed are the absolute path as they existed on my development machine. Here's the stack trace:.........................
I just deployed a site and all looks okay as far as it being up there and the files are there.However when I go to click on any link, they don't even send a request back to the browser.If I right click then open link in new tab is sends it along just fine but it seems like the page can't initiate a request back to the server,
