Configuration :: Running WCF 3.5 App Under .NET 4.0 Website?
Jul 20, 2010
I have a website that is hosted on IIS6 and set to use .NET 4.0, but I still have a WCF service on the site that is using 3.5. When i browse my svc file, i get the error:
unrecognized attribute 'targetFramework'
and it point to the websites root web.config. I have tried this MSDN article and still get the same error. My site is using a different app pool than my WCF service, and is configured to use 4.0 in the ASP.NET tab of properties. I have also checked and made sure that my WCF service is using 3.5(2.0) in its ASP.NET properties tab.
View 1 Replies
Similar Messages:
Jul 7, 2010
I have a web application developed in asp.net 1.1. Now I want to move it to WS2008 R2 64 bit IIS 7.5.
As far as I know asp.net 1.1 is supported only on 32 bit machines.
My question is can we run the 1.1 application in WS2008 R2 64 bit IIS 7.5
View 6 Replies
Sep 16, 2010
I want to run my asp.net site over my php hosting server/
In other words i want to run my site over apachi server
View 4 Replies
Nov 14, 2010
The application pool randomly shuts down. I am assuming this is due to Rapid Fail Protection and errors are occuring that are triggering it. However... there are no errors being reported in the event logs. So my next inclination is to think of the possibilities of a memory leak. How do you test for memory leaks on a website running locally?
View 2 Replies
May 18, 2010
I host a website that has recently been upgraded from .NET Framework 2.0 to .NET Framework 4.0. Within the website, I have an instance of BlogEngine which still requires .NET Framework 2.0. Each website is in it's own application pool. My issue is that when I browse to the blog portion of my website, I receive a 500.19 error with the following information...
The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration The web.conf file that is listed in the error message is the config file that belongs to my root website which is running .NET Framework 4.0. How do I get the two websites to run together in the same website using different versions of the .NET Framework?
View 2 Replies
Feb 7, 2010
My client gave me this web solution, in it various projects, and the problematic project (for me) is the Web Site.
I've copied the code to test web server (2008) and installed VS 2008 so I could step through the code on the server due to some weirdness.
Anyhow, when I open the solution locally on my personal computer, it runs on Cassini [URL] because I'm not on a server OS. However, when I run the app on the web server, when I hit F5, it runs oh [URL].
When I'm running the code on the server, how do I point the web site to use Cassini?
View 1 Replies
Mar 6, 2010
I have a new development machine running windows 7 professional 64 bit. On loading up a website project Im getting this error
'The Web Application Project 'websitename' is configured to use IIS. To access local IIS websites, you must install IIS components:
IIS 6 Metabase and IIS 6 Configuration Compatibilty
ASP.net
Windows Authentication
In addition you must run Visual Studio in the context of an administrator account
As far as Im aware, I am an administrator of my own pc and I have the .net framework installed.
View 4 Replies
Aug 11, 2010
I am having serious issue running a MVC web site from IIS 6 especially with Windows authentication mode. I know its very simple but missing some ting between. Succeeded configuring MVC on IIS 6. Now Trying to enable Windows Authentication mode on MVC Web Site, Steps included in my configuration
- enabled windows authentication mode in web.config
- Enabled Integrated Windows Authentication on IIS web site under Directory Security.
- Given permissions to a Domain group (eg: asiaDomainGrp) [Read, Write] Do i need to add ASP.NET Machine accountIUSR_<machines name> under this?
During the intial loading, I am trying to query Active Directory to get authenticated user's full name to display on default page, this is not success full due to some issue, later I changed to "HttpContext.User.Identity.Name". Now I could able to access Default page from the web server, but real heck is here. For some reason IIS is using NT AUTHORITYANONYMOUS LOGON.
[Code]....
I have separated two servers as Web server/Database server.
View 4 Replies
Nov 29, 2010
I have a problem with my IIS setting and I am not sure how to fix it. I created a new website which is based on .net 4.0. If I set the ASP.Net version to 2.0 for the website and try to browse to the site, I get the Run time error in the web.config which is understandable. If I change the asp.net version to 4.0 and try to browse to the website, I get the page not found error (see below). Any ideas what is wrong? I am hosting both 2.0 and 4.0 apps on this machine but this is the first time I am trying to run .net 4 application.The page cannot be foundThe page you are looking for might have been removed, had its name changed, or is temporarily unavailable.Please try the following:Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly.If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted.Click the Back button to try another link. HTTP Error 404 - File or directory not found.Internet Information Services (IIS)
View 4 Replies
Apr 2, 2010
I have a Windows 2008 server and MVC 2.0 site is hosted under IIS 7.0 root directory. The site works fine. I want to use the BlogEngine.NET with my site. For example if my mite name is [URL] (which is the root of IIS) and the blog should be [URL]
Is this possible? Can I create a sub virtual directory within my root (where the MVC 2 app is hosted) and run the ASP.NET BlogEngine.Net in it?
View 1 Replies
Jan 9, 2010
I have an ASP.net Website. the project' content is in a folder called MyWebSite. When I run my application from Visual Web developer 2008, the browser displays the following address in the address bar: http: // localhost/ MyWebSite /Default.aspx
I want to be able to run my Website from the following address:
http://localhost/
View 3 Replies
Sep 27, 2010
I have an ASP.NET 1.1 app running fine on my local system and Win 2003 server. I transferred this site to a Win 2008 R2 server. The site is running under an app pool configured to run under ASP.NET v2.0. Some of the pages of the site throw exceptions and there are other problems in running the site as well however the same works good on Win 2003 Server. When I try to run the site under app pool for ASP.NET 1.1, it says "500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed."
View 2 Replies
Aug 27, 2010
i am trying to upload my applicaiton on IIS5.1 version.my application uses SQL server 2005 and Membership provider. everytime i create an virtual directory and run it ,it always says that login failed for user IUSR_TPN0150 .cannot open database emp.
how can i give access to annonymous users so that my login page is shown.
View 6 Replies
Aug 27, 2010
i have created an application in asp.net with C# this application is running well when i run it from visual studio but when i deployed it on IIS for testing it is not working it gives me error that isThe control with ID 'UpdatePanel1' requires a ScriptManager on the page. The ScriptManager must appear before any controls that need it.i have check complete project i did forget any thing and application is running wll but on iis it gave me above stated error any body can help me and one thing is that i install IIS after installing VS2008
View 1 Replies
Oct 26, 2010
I all of a sudden strated getting the following error when running my website. Can anyone tell me how to fix? I am using VWD 2008 with .net 3.5.
Compilation Error
description:
[Code]....
Source File: vbc : Command line Line: 0
Show Detailed Compiler Output:
[Code]....
Version Information:
Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082 An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC2017: could not find library
'C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll'
Source Error:
View 2 Replies
Feb 24, 2011
In Visual studio 2008, if I run a website, then the website is running in other url. But it is running perfect in visual studio 2005.When I click the Asp.net configuration setting itself, the url is redirected into someother webserver.
View 1 Replies
May 1, 2010
I've created a site using Visual Web Developer 2008 Express Edition (ASP.NET 3.5) but the server hosting it runs ASP.NET 2.0. I'm getting some odd errors running the live site. Is there anything I need to be aware of? Do I need to make any changes to the web.config file (that was generated in VWD) or anything else?
View 2 Replies
Aug 9, 2010
i developed a web site and i tried to run on iis 6.0 but i got this error..
XML Parsing Error: not well-formed
Location: http://localhost/iaec333/Default2.aspx
Line Number 1, Column 2:<%@ Page Language="VB" MasterPageFile="~/uk.master" AutoEventWireup="false" CodeFile="Default2.aspx.vb" Inherits="Default2" title="Untitled Page" %>
-^
but i can view web pages in browser using " view in Browser".
View 1 Replies
Nov 1, 2010
I added a reference to a DLL in my ASP.Net app. That started causing a BadFileFormatException, so I switched my app to target x86. I'm now getting this error:
System.IO.FileNotFoundException: Could not load file or assembly 'TheDLLThatIReferenced.dll' or one of its dependencies. The specified module could not be found.
The DLL in question is present in both the bin directory, and in binx86Debug in my app's directory on the server. When I try to run my app out of Visual Studio, it runs just fine, but if I try to hit it via the internet, I get that error. What might be causing this error, and how can I correct it?
View 1 Replies
Aug 18, 2010
I'm working to develop a website application for my client. Unfortunately, my client does not want to spend the money to host it. Is it possible to host the whole program with the database on his laptop without him installing Visual Basic?
View 3 Replies
May 6, 2010
I'm trying to debug a co workers application that calls a web service to encrypt data.
But when I get to the line
bool login = Security.Login(username, password);
[Code]....
View 2 Replies
Apr 8, 2010
getting these two to play together nicely? I've got ColdFusion 9 running fine, but whenever I try to access a .NET page I get a 500 error. I'm pretty sure this has to to with the custom handlers ColdFusion installs.
View 4 Replies
Jul 15, 2010
I have an application which was running totally fine some days earlier. The problem began since the day i have taken SVN update from server. Its saying "error 404, file not exists", it just removes application name from url & only leaves "http://localhost/1980". Whatever changes i try in web.config it has no effect. It just stick to this error. I copied my previous web.config also but no luck.I tried to comment all lines which are redirecting user to any other page in case of error also. Its happening in my colleagues copy also.
FYI, all other .net applications on my system are still running smoothly. Only this application is not running. Checked the log & it says: 2010-05-15 05:50:12 192.168.1.2 3692 192.168.1.53 2869 HTTP/1.1 NOTIFY /notify 400 - Hostname -
View 1 Replies
Feb 17, 2010
This is a general ASP.NET question. I have an asp.net site that is hosted on domain A. The site works fine and uses a session when user login. I have a new empty site on domain B (different server). I tried to load the same site on domain B by calling it in an HTML IFrame site load and works but it seems that user con not login, after some experiments I think his is related to the session not working. Can I run the site on an IFrame? Sessions should work?
View 4 Replies
Jan 17, 2011
I have an an intranet website running under IIS6 (under a specific port, not the default one) with a integrated windows authentication enabled and uses an application pool configured with a service account. the issue is, if I access the website using the server name with a fully qualified domain in the URL, it throws a login prompt (doesn't work even if enter my windows login credentials), but if I use the IP address of the server then it works fine. I need to do to get the URL with server name working.[URL]
View 3 Replies
