Configuration :: Transformation With Config Files?
Aug 17, 2010
I am currently trying to publish a web application in TestRelease mode and when I do, the following dll is compiled and put into the bin folder.Microsoft.VisualStudio.Settings.dll.I do not get this dll when I comple in release or debug mode so wondered if there is a setting I can change so this dll does not appear in the bin folder when I compile in TestRelease or TestDebug mode ?When I get that dll in the bin folder and try to deploy the application to our test server, I receive the following message: Could not load file or assembly 'Microsoft.VisualStudio.Settings.dll' or one of its dependencies.Any suggestions on why that dll appears in the bin folder and how I can prevent it from being deployed when I pusblish through visual studio ?
View 1 Replies
Similar Messages:
Nov 19, 2010
I am just starting my first MVC Web Application and have noticed that I now not only have a Web.config file in the root, but 2 sub-files, for Debug and Release configurations. I've read up a bit on what this is, in that I can put specific configurations for my different environments in each file, but I am confused as to when these seperate files are actually used.
Do I HAVE to use the built in Deployment/Publish tools within Visual Studio in order to benefit from this, or, if I set my build mode to Release, and do a simple build of my web application, then deploy the compiled files, along with the Web.config AND Web.Release.config, would that work?
I'm just not sure what deployment options I have to take advantage of these seperate config files?
View 1 Replies
Nov 25, 2010
I'm struggling to get web.config transformations working with automated builds. We have a reasonably large solution, containing one ASP.NET web application and eight class libraries. We have three developers working on the project and, up to now, each has "published" the solution to a local folder then used file copy to deploy to a test server. I'm trying to put an automated build/deploy solution in place using TFS 2010. I created a build definition and added a call to msdeploy.exe in the build process template, to get the application deployed to the test server. So far, so good!
I then tried to implement web.config transforms and I just can't get them to work. If I build and publish locally on my PC, the "publish" folder has the correct, transformed web.config file. Using team build, the transformation just does not happen, and I just have the base web.config file. I tried adding a post-build step in the web application's project file, as others have suggested, similar to:
<target name="AfterBuild">
<TransformXml Source="Web.generic.config"
Transform="$(ProjectConfigTransformFileName)"
Destination="Web.Config" />
</target>
but this fails beacuse the source web.config file has an "applicationSettings" section. I get the error Could not find schema information for the element 'applicationSettings'.I've seen suggstions around adding arguments to the MSBuild task in the build definition like
/t:TransformWebConfig /p:Configuration=Debug
But this falls over when the class library projects are built, presumably because they don't have a web.config file.
View 3 Replies
May 10, 2010
The VS2010 Online Help for config transformation appears to be incorrect.If I add something like view plaincopy to clipboardprint?
View 5 Replies
Nov 18, 2010
I'm using the web.config transformations on an ASP.NET site so I have .config settings for dev, test, and release environments. I need to run the source code in Visual Studio against the test database using the settings in Web.Test.config and I can't figure out how to do it. I tried changing the configuration to Test but it still uses the base Web.config settings.
View 1 Replies
Jun 7, 2010
I am working on an ASP.NET project in Visual Studio .NET 2010 and attempting to make an MSI installer using a Web Setup Project. I added the Primary output from the project (which seems to pull in the relevant dependencies) and the Content Files from the project (which pulls in the Web.config and the .svc files).
The issue is that rather than applying the XDT transform and creating the Web.config using the Web.Release.config, it just copies the Web.config, the Web.Release.config, and the Web.Debug.config into the installer without doing any transformation at all.
How do I get it to apply the Web.config transformation before creating the installer?
View 2 Replies
Nov 16, 2010
I have two webconfig files, on in the root directory and one in the other directory. I dont know how to access or specify for the particular pages or APIs those are in the folder.Root webconfig file used by another section and the 2nd one accessed by another api. I have no idea about that
View 3 Replies
Mar 23, 2010
How can I use web.config file in VB.net class library.
View 4 Replies
Mar 24, 2011
I have a couple of configuration files flxConnection.config and flxSecurity.config files which are being referenced from the Machine.config file like below.
<securitySettings configSource="flxSecurity.config" />
<connectionStrings configSource="flxConnection.config" />
I would like to encrypt the files (a) flxSecurity.config and (b) flxConnection.config using the RSAProtectedConfigurationProvider using a custom RSA key, which can be deployed to other servers. How is that possible? If possible, looked at a variety of stuff in the internet and they all seem to be referring to either Web.config or Machine.config encryption which is pretty straight-forward. This is how the flxConnection.config looks like,
<?xml version="1.0"?>
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated
Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
</connectionStrings>
This is how the flxSecurity.config looks like,
<?xml version="1.0" encoding="UTF-8"?>
<securitySettings>
<add key="APC_APP_ID" value="apcrpt"/>
</securitySettings>
View 3 Replies
Nov 8, 2010
let me know that what is the advantages / benefits of using multiple web.config files in web application
View 3 Replies
Feb 16, 2011
This is a general question and is not about any particular issue that I am facing right now.As configuration settings in the child level can override the ones in parent level,errors can occur when you have 2 web.config files one redefining configuration settings that you cannot override such as authentication or session state.Issue happens when you have authentication / session state set on the lower level web.config and also in higher level web.config. Is there any other configuration settings like these ?
View 1 Replies
Dec 30, 2010
I'd like to add build configuration dependant web config files to my empty ASP.NET 4 Web site project. How can I do that? According to this blog entry, VS 2010 is supposed to provide a context menu entry on the original web.config file, Add Config Transform, allowing to add build configuration dependant web.config files to the project. But this context menu entry doesn't exist. What did I do wrong?
Steps to reproduce:
Create an empty ASP.NET 4 Web site project on localhost (IIS)
View 4 Replies
Apr 12, 2010
I was merging my web.config file and one I downloaded for open source forums, as it told me to. I copied the different lines myself, but now I'm getting three compile errors in my file.
Here are the errors:
1- The 'compliation' start tag on line 47 does not match the end tag of 'system.web'. Line 205, position 4.
2- Tag was not closed. (On line 47, column 4)
3- Expecting end tag </compilation>. (On line 205, column 3)
I'll also post my web.config file below.
[Code]....
View 5 Replies
Feb 16, 2011
Currently, I work on an ASP.NET project which is hosted under version control and is used on several developer machines, tester machine and production environment.
In three cases, configuration (Web.config) may be different. For example, developer and tester environments use testing SQL Server, whereas in production environment, another SQL Server is accessed, so the connection string is different in those cases.
We want to keep three versions of Web.config in subversion. But modifying each of three files every time we need to add, remove or change a common setting is annoying: it would be nice to have a common, master Web.config, which will be inherited by each of the three Web.config files.
How to set up an ASP.NET project which will use a master configuration file and different slave configuration files on different machines, thus sharing the same project/source code/configuration files in subversion?
View 2 Replies
Sep 1, 2010
We are experiencing some strange behaviour on one of our ASP.NET web servers (Windows 2003 64-bit). After some activity, two third-party controls are unable to run correctly. One is log4net (it does not write error messages out) and the other is a menu control (it displays eval message instead of picking up its license). The one common thread is that both controls pick up their config from external config files (linked to from web.config).
Just wondering if anyone has any thoughts on this or experienced this in any way. Is it related to file/folder rights? The server has been running fine for a while and just started exhibiting this behaviour. Perhaps it occurs around the time the worker processes are recycled.
View 1 Replies
Jul 1, 2010
I was following the tutorials from this two sites:
http://www.15seconds.com/issue/070104.htm
http://aspnet.4guysfromrolla.com/articles/020404-1.aspx
Following the first site, it had worked but when Iīve moved the pages and files to other folders and set the web.config file on this folder, now it wonīt work at all!!!
The file is an *.swf object. I did put the asapi.dll to map the extension on the website root, Iīve put the
[Code]....
on the web.config new folder and on the web.config websiteīs root.
It wonīt work!!! I can access the file directly!!! on the web.config of the folder that contains the file, there is a <deny users="*" /> line.
View 4 Replies
May 7, 2010
I just upgraded to VS 2010 and MVC 2.0 and I noticed the web.config has two additional files attached to it? Are these files used to specify debug and release specific settings, so you don't clutter up the main web.config?
Does it even make sense to place a connection string in the root web.config file if I have have a local and remote one in the debug and release web.configs respectively.
View 1 Replies
May 3, 2010
I have deploy my web site, it contains a project!
in MyWeb there are all the aspx page and some entites datamodel, in MyApp there are the class with function like "getter data from DB" and there is a entity data model.
afeter the deploy, I have only the web.config and the connection string for the entity datamodel....itīs run ok, read/write the data on the DB.
The problem is with MyApp.....after the deploy it is a dll file and I donīt have the app.config and the entity inside it donīt run, not read/write nothing on the DB.
There arenīt error or messager but not read/write the data in the MyApp project.
all run on the iis 7
now...the question is:
I lose the connection string (in app.config) after the deploy?
Can I put a entity in the MyWeb and read it in another project (myApp)?
ps: for connect to DB I use not the c# code:
var db=from x in AccessDB.Example select x;
View 1 Replies
Jan 5, 2011
I am developing web applicaiton. I want to read web.config in App.config file. I have appSettings and connectionStrings in web.config. How to read that?
View 10 Replies
Jan 15, 2010
While using a third party dll I was getting the following exception - "exePath must be specified when not running inside a stand alone exe" with following trace
System.Configuration.ConfigurationManager.OpenExeConfigurationImpl(ConfigurationFileMap fileMap, Boolean isMachine, ConfigurationUserLevel userLevel, String exePath).
The reason I found was that it was looking for app.config and I had provided the details in web.config. My question is why does the system.configuration differentiate between web.config and app.config.
View 2 Replies
Aug 10, 2010
I upgrade my application from .NET 2.0 to .NET 4.0. Everything went smooth, with very few errors. Now the code is compiling fine, but run time environment is loading the configuration parameters from app.config instead of web.config;Here is my setup:Objects project: has app.configUI project: has web.config, When I run this site, it is fetching the configuration parameters from app.config. Any idea if I need to make any changes to read it from web.config instead of app.config? It used to work fine in my previous environment.
View 8 Replies
Oct 13, 2010
I have an application that uses resource files to display items in multiple languages. My app uses quote a lot of javascript and the alerts need to display in the local language. To do this, I have created an http handler which will read the keys and values of the culture-specific resource file and write them to a JSON array which is then embedded in the page in a script tag, the messages can then be accesses using, for exmaple:
Message.Error (en-GB = "Error", fr-FR = "Erreur")
The messages http handler works great in development, however when I run the application on a test server, I get the error: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "Resources.Alerts.resources" was correctly embedded or linked into assembly "App_GlobalResources.b0n9j90e" at compile time, or that all the satellite assemblies required are loadable and fully signed. The code that I use to acccess the resource file is:
ResourceManager manager = Resources.Alerts.ResourceManager;
ResourceSet resourceSet= Resources.Alerts.ResourceManager.GetResourceSet(Thread.CurrentThread.CurrentCulture, true, true);
Where Resources.Alerts is the type that contains my multi-lingual definitions. The build action for the Alerts.resx file is set to "Embedded Resource". Any ideas why this works locally but not on my test server, am I missing something?
View 1 Replies
Jun 4, 2010
I built my ASP.NET website using vs2008 professional.
Now I have purchased vs2010 professional edition.
I do format my computer and then installed vs2010.
Now I want to deploy my website in vs2010, but it is giving configuration error in <add assemblies...
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
View 2 Replies
Jun 2, 2010
The majority of files in the Temporary ASP.NET File folder for a given application get deleted by ASP.NET following compilation -- .DLL and .PDB files amongst others remain.
Our compiler produces proprietary debug information files which are amongst those that get deleted.
Marking the files read-only prevents this but are there other options available?
View 5 Replies
Apr 30, 2010
Web.config is the main settings and configuration file for an ASP.NET web application. The file is an XML document that defines configuration information regarding the web application. The web.config file contains information that control module loading, security configuration, session state configuration, and application language and compilation settings. Web.config files can also contain application specific items such as database connection strings
Example 1:
<!-- This is an example Web.config file -->
[Code]....
In this article, we will see how to read the configuration settings in the web.config using 'JavaScript'.
Step 1: Create a new ASP.NET website. Add a button control to the Default.aspx.
Step 2: Right click the project > Add New Item > Web Configuration File
Add the following sample entry to the appSettings section in the web.config between the <configuration> tag as shown in the example 1:
<add key="var1" value="SomeValue"/>
Step 3: To read these entries using JavaScript, add the following script in the <head> tag of your Default.aspx page as shown below:
<head runat="server">
<title></title>
<script type="text/javascript">
function ReadConfigSettings()
{
var v1 = '<%=ConfigurationManager.AppSettings["var1"].ToString() %>'
alert(v1);
}
</script>
</head>
Step 4: Call this function on a button click and display the values of the configuration settings
<input type="button" value="Get" onclick="ReadConfigSettings();" />
That's it. Run the application and click the button. The value of the key in the appSettings will be displayed in the alert window. I hope you liked this short article.
View 7 Replies
