We use crystal report in our website. But we are facing a problem
"The maximum report processing jobs limit configured by your system administrator has been reached".
I can't remove temporary files from web server through
CrystalReportViewer1.Dispose();
CrystalReportViewer1 = null;
I am using this code to search records from ... when I goto this page i am getting this error ...
The maximum report processing jobs limit configured by your system administrator has been reached
I couldn't find this ...
path HKEY_LOCAL_MACHINESOFTWARECRYSTAL DECISIONS10.0REPORT APPLICATION SERVERSERVERPrintJobLimit to make it -1 for unlimited print job
protected void Button2_Click(object sender, EventArgs e) {
if (TextBox2.Text == "" && TextBox3.Text == "" && TextBox4.Text == "") {
DateTime date = Convert.ToDateTime(TextBox1.Text);
SqlCommand cmd = new SqlCommand("SELECT * FROM Transactions where report_type = @report_type and dateadd(dd, datediff(dd,0, [R_date]), 0) = @R_date ");
[Code] ....
Our heavily-used VS2005 application uses CR (10.2) for an MSWord-formatted stream to a webservice, and for printing from a CRViewer. We continue to get "Failed to open report" or "The maximum report processing jobs limit configured by your system administrator has been reached". Once the error starts, the only remedy is recycling the application pool, disconnecting current users.
I have used the proper ReportDocument Close() and Dispose(), and even GC.Collect(), in Page_Unload. I upped the Print Job Limit from 75 to 300. After recycling I delete temp files.
1) Is there any way to monitor the use of the CR resources, to see when they increase and get close to the limit?
2) Is there any way to free them without having to disconnect users?
I suspect users are simply closing their browser after printing from an open CR Viewer. It would still go through Page_Unload, right? So maybe I would benefit from closing and disposing the CR Viewer in Page_Unload as well as the click that returns them to the application.
I had assumed that to permit users to page through the report, the CR Viewer had to have ViewState enabled, and remain open through Page_Unload.
im using asp.net crystal report......i just upload the crystal in server and comiled i got error like"The maximum report processing jobs limit configured by your system administrator has been reached".then i just used
protected crysview_Unload()
{
report.close();
report.dispose();
}
then i did'nt got error but when i open this in second time it cant open the crystal report.
how to create CRYSTAL REPORT by pulling values from database ,processing them (applying percentage,averages ,decisions )
View 1 Repliesi write a site and get this error, i using VS2010.
An error occurred during local report processing.
The definition of the report 'ModulesReport1.rdlc' is invalid.
An unexpected error occurred in Report Processing.
Could not load file or assembly 'Microsoft.ReportViewer.ProcessingObjectModel, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
i try run on my machine its all work fine, but when i complier and run it on Window server 2008 get this error.
I read [URL] I install the ReportViewer.exe but still cannot find the Microsoft.ReportViewer.ProcessingObjectModel.dll, however I got find it Microsoft.ReportViewer.ProcessingObjectModel in C:Windowsassembly and is not a dll file.
I'm getting the "Load Report Failed" Error.
I have a web application designed using VS2008 & Crystal Reports for VS2008 (Ver. 10.5.3700). I'm using Framework 2.0 for deployment.
My development system is WinXp and my deployment system is Win2003 Server.
Here is what i have done -
1) Added a Crystal Report to my project "rptReport.rpt"
2) Added a Crystal Report Source (crSource) to my .aspx page.
3) Added Crystal Report Viewer to my page, with crSource as its Report Source.
This works fine when i run it on my development machine. But Gives a "Load Report Failed" error on my deployment machine.
This is what i have already tried doing on deployment server:
1) Giving IIS_WPG full control to temp folder.
2) Publishing with "Allow this precompiled site to be updatable." checked/unchecked.
I have a report, which has two sections namely Labour and Spares.In labour section no of records per page must be limited to 5 records and the Spares section have to limit to 10 records per page.If either Labour or Parts exceed the max limit the records must be shown in the next page. Limiting one section by using formulas can be done easily ...but it is very difficult control two sections simultaneously.
View 4 RepliesRuntime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a tag within a "web.config" configuration file located in the root directory of the current web application. This tag should then have its "mode" attribute set to "Off". Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's configuration tag to point to a custom error page URL. ----------------------------------- This error will be display when I am try to show the Crystal Report. Can anybody tell me what Property I have to ser in Windows Server 2008 R2 or in IIS7???
View 1 Repliesa myth has been passed to me by a senior who told me to 'always' design a crystal report using Add command and not through the table view (like selecting tables and linking them manually).I have been having a hard time writing the queries for master detail reports and making sub report links manually. It gets pretty confusing sometimes.I find it easy to design reports by just selecting two tables and dragging and dropping the link in crystal report designer.
View 1 Replies<connectionStrings>
<add name="SchoolEntities" connectionString="metadata=res://*/SchoolModel.csdl|res://*/SchoolModel.ssdl|res://*/SchoolModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=.;Initial Catalog=school;User
ID=sa;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
how report read this connection string
using vs.net 2005, sql server 2005, creating windows form appI have a dataset that I bound to a crystal report as follows:
[Code]....
and in the Crystal Report in design view I added a Text Object called "myTxtObj".I am assuming that I can do something like this
[Code]....
However I'm not seeing the "myTextObj" with intellisense in the code behind in the form.so my question is: after binding a dataset to a report how to you bind column values to text objects on your crystal report?and actually one mor thing:I just ran the project and found out when I try to do the databind that i'm getting an error:"The report has no tables"how to solve this too?
Is it possible to show 3 "Crystal Report" in single "Report Viewer Control" page??My current code for 1 Crystal Report and 1 Report Viewer control Page is below:Below code Page name is "JpsCrystalReport.aspx"
using CrystalDecisions.CrystalReports.Engine; //for crystal report
using CrystalDecisions.ReportSource;
protected void Page_Load(object sender, EventArgs e)
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["SQLConnectionString"].ConnectionString);
[code]...
I want that when i click on button it redirects to "JpsCrystalReport.aspx" page as per condition given. Then on "JpsCrystalReport.aspx" page it should execute the 3 crystal reports as per conditions given on button click.Or I had to create 3 different "JpsCrystalReport.aspx" pages (that contains Report Viewer control) to show 3 Different Crystal Reports as per condition on button click?
I have a Registration form with two Buttons "Save" & "Report". When I click on "Save" the data will store in the Database. Now I want when click on the "Report" button the report of that particular will be produce in the Crystal report. How can I do that??
View 2 RepliesI am developing we application using Csharp on Visual studio 2008.How can I pass values from Page or GridView to a Crystal Report? For example I want some details on a Default.aspx want to appear on the Crystal report when I click on it. How do I pass theses values from Page to crystal report at Runtime?
View 3 Repliesi upload my site on server but there is error in crystal report web.comfig there is error as belowParser Error Message:Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
[Code]....
ent system (Windows 7 x64) and live system (Server 2008 x64), and both with IIS7 I receive the following error message, after clicking the "Print" button in the printer selection popup."An error occurred on the server. Printing will be stopped. Would you like to view the error information?"If I click "y
View 1 RepliesI used push method with my crystal report. I used a dataset which on page load loads 2 seperate datatables and are added to it. Everything works fine. But if the Milestones Datatable is empty, the crystal report shows none of the data related to the Projects Datatable, as if the table is empty. The Select Method of the business logic layer objects uses querystrings of the name ProjectNo. Below is a sample code.
[Code]....
to print a crystal report from the server's printer with a button on the web application.Assume that I have a ASP .NET Web Application, When i press the "print" button on the web application, the server which holds the web application prints the specific crystal report with specific data set. Is this possible? How I am going to make this happened?I am sorry to say that I'm very new to all these web programming,
View 3 RepliesI am working with Parametrized Crystal Reports. There are only two page called Source.aspx and Target.aspx.
[code]...
Only One text box data shows Not 2nd One.Can any one help me with this by checking my code?
I installed Visual Web develperTrying to get a crystal report to show in the form but therte are no Crystal obhject to select Installed Visual Studio 2008 I can add an Item for Crystal now in form show the form and I see it has menu bar for crystal viewer and I see the report Now if I move the webpage to our server which has IIS 7.0, ASP.net 3.5 what else do I need to install on the server so it wil show the crystal report in the form?
View 5 RepliesI'm struggling with this problem about 2 weeks and still cannot find the resolution.I was developed a .Net application with visual studio 2008 and using crystal report to generate report.It is working fine in my local machine. However, after I deployed the application to web server with microsoft server 2003 64bits server. The report cannot open and I get this error The type initialize or 'crystaldecisions.crystalreports.engine.reportdocument' threw an exception. I try to install the redistribution package from C:Program FilesMicrosoft SDKsWindowsv6.0ABootstrapperPackagesCrystalReports10_5 but it doesn't work.
View 1 RepliesI create an ASP.NET Crystal Report Web application using VS.NET 2010. In ASP.NET page, I stored two values in Session state and need to pass them as input parameters to Oracle stored procedure. In Crystal reports 2010 once you connect to a stored-procedure as data source, it automatically creates the parameter fields with Crytal Report Viewer. how I pass values to store procedure at runtime automatically.
Detail code:
1. ASP.NET page store the values in the Session:
Sesion.Item("CourseNumber")
Sesion.Item("StudentNumber")
2. I like to pass above values to the store procedure with IN parameters named P_CourseNo and P_StudentNo to print out the Crytal Report with Store Procedure as data source.
We have migrate from VS2005 to VS2010. CR2010 installed too.
We have 1 website and class project in one solution.
The assembly of web.config has point to new version of CR ver13 and also checked that the references is ver13 too.
WEB CONFIG:
[code]....
However in code behind, when "Go To Definition" the imported CrystalDesicions Namespace, it go to CR version10 location.
The class project has references to correct ver13.
In the end we get error of :
Error 17 The project currently contains references to more than one version of CrystalDecisions.CrystalReports.Engine, a direct reference to version 10.2.3600.0 and an indirect reference (through 'Web_cl.clsAccountRpt.GetAccountStatementSummaryRptDoc')
to version 13.0.2000.0. Change the direct reference to use version 13.0.2000.0 (or higher) of CrystalDecisions.CrystalReports.Engine. D:ProjectWebGlobal 4.0Web_developCpAdminReportFormAccountReportModule.aspx.vb 40 28 D:...Web_develop
The function in class has return ReportObject back to the website, because of the website reference did not really point to new version has causes this error. I have checked all references in web.config and project properties all is point to new version, but in program it seems still point to old one.
I want to give the manul expot option for export the crystal report to excel .
View 1 Replies