im using asp.net crystal report......i just upload the crystal in server and comiled i got error like"The maximum report processing jobs limit configured by your system administrator has been reached".then i just used
protected crysview_Unload()
{
report.close();
report.dispose();
}
then i did'nt got error but when i open this in second time it cant open the crystal report.
Our heavily-used VS2005 application uses CR (10.2) for an MSWord-formatted stream to a webservice, and for printing from a CRViewer. We continue to get "Failed to open report" or "The maximum report processing jobs limit configured by your system administrator has been reached". Once the error starts, the only remedy is recycling the application pool, disconnecting current users.
I have used the proper ReportDocument Close() and Dispose(), and even GC.Collect(), in Page_Unload. I upped the Print Job Limit from 75 to 300. After recycling I delete temp files.
1) Is there any way to monitor the use of the CR resources, to see when they increase and get close to the limit?
2) Is there any way to free them without having to disconnect users?
I suspect users are simply closing their browser after printing from an open CR Viewer. It would still go through Page_Unload, right? So maybe I would benefit from closing and disposing the CR Viewer in Page_Unload as well as the click that returns them to the application.
I had assumed that to permit users to page through the report, the CR Viewer had to have ViewState enabled, and remain open through Page_Unload.
I am using this code to search records from ... when I goto this page i am getting this error ...
The maximum report processing jobs limit configured by your system administrator has been reached
I couldn't find this ...
path HKEY_LOCAL_MACHINESOFTWARECRYSTAL DECISIONS10.0REPORT APPLICATION SERVERSERVERPrintJobLimit to make it -1 for unlimited print job
protected void Button2_Click(object sender, EventArgs e) {
if (TextBox2.Text == "" && TextBox3.Text == "" && TextBox4.Text == "") {
DateTime date = Convert.ToDateTime(TextBox1.Text);
SqlCommand cmd = new SqlCommand("SELECT * FROM Transactions where report_type = @report_type and dateadd(dd, datediff(dd,0, [R_date]), 0) = @R_date ");
[Code] ....
We use crystal report in our website. But we are facing a problem
"The maximum report processing jobs limit configured by your system administrator has been reached".
I can't remove temporary files from web server through
CrystalReportViewer1.Dispose();
CrystalReportViewer1 = null;
how to create CRYSTAL REPORT by pulling values from database ,processing them (applying percentage,averages ,decisions )
View 1 RepliesI got a code from internet for creating Crystal reports in Visual studio 2008 .net. It shows on how to pass parameters from web form to Crystal reports. Everything is ok, except the report crystal report viewer. How can I declare and assign report crystal report viewer manually in Visual studio .net?.
[Code]....
Is it possible to show 3 "Crystal Report" in single "Report Viewer Control" page??My current code for 1 Crystal Report and 1 Report Viewer control Page is below:Below code Page name is "JpsCrystalReport.aspx"
using CrystalDecisions.CrystalReports.Engine; //for crystal report
using CrystalDecisions.ReportSource;
protected void Page_Load(object sender, EventArgs e)
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["SQLConnectionString"].ConnectionString);
[code]...
I want that when i click on button it redirects to "JpsCrystalReport.aspx" page as per condition given. Then on "JpsCrystalReport.aspx" page it should execute the 3 crystal reports as per conditions given on button click.Or I had to create 3 different "JpsCrystalReport.aspx" pages (that contains Report Viewer control) to show 3 Different Crystal Reports as per condition on button click?
I have an ASP.Net (.Net 2.0) application that creates Crystal Reports (version 11.5) and shows them with CrystalReportViewer control. For some reason the control isn't showing the logo image in the header of the report. It renders the following html
<img width="320" height="76" alt="Imagem" src="CrystalImageHandler.aspx?dynamicimage=cr_tmp_image_e47fba99-96fc-471b-ab11-06fd2212bbdd.png" border="0"/>
I already included the aspnet_client folder in my Virtual Directory in IIS.
using crystal report in VS 2005 C#. I want to print multiple copies(3) of a same report in a single page. Is is possible.
View 1 Replieswhen i run the crystal report , there is message "The report you requested requires further information."For dataset , it requires username and passwordI cannot login the report page.....
View 9 RepliesI need textbox values to crystal report so that i can print customised report;
View 1 RepliesIn my project I have to create crystal report which includes subreport ,
the data of subreport must be linked with the field of the main report...
Language is C#.net
Web App.
i write a site and get this error, i using VS2010.
An error occurred during local report processing.
The definition of the report 'ModulesReport1.rdlc' is invalid.
An unexpected error occurred in Report Processing.
Could not load file or assembly 'Microsoft.ReportViewer.ProcessingObjectModel, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
i try run on my machine its all work fine, but when i complier and run it on Window server 2008 get this error.
I read [URL] I install the ReportViewer.exe but still cannot find the Microsoft.ReportViewer.ProcessingObjectModel.dll, however I got find it Microsoft.ReportViewer.ProcessingObjectModel in C:Windowsassembly and is not a dll file.
Im implementing crystal report which is builtin in visual studio 2008. When i create my crystal report and check its preview it shows me the data but when i call it on my abc.aspx page report doesnt load and gives error 'Load report failed'.
This is my Code
[code]....
what may be im doing wrong. This report also accept 4 parameters and im not setting them anywhere. Also one thing i want to mention if i make another simple project and do the same thing it runs perfectly and give me the output.
We have deployed our ASP.NET application on the target machine. The application contains some crystal reports (rpt files) and while invoking we pass on the database connection details. It is working fine on the test server. But on the target server, the crystal report while being invoked asks for the database connection details. It asks four parameters as Server, database, user id, password. Out of these, the first two text boxes are disabled. The Server editbox shows the ip of the server that I passed. But the database parameter is shown blank. I was expecting the initial catalog that I set in the connection string. user id is showing the user id I passed.
The config file has the connection string like:
[code]....
I want to print the crystal report with out previewing the report first?
Edited.
note that :
I want the client to print the report from his machine not from the server printer.
1. i have one problem on clicking print button in toolbar of subreport itz again come back to main report...
so, how to take the print of subreport...?
2. I have 10 pages in sub report ... Now i want to take print of 5 page .... ? How to do so ??
some i am getting a error when trying to generate report through crystal report.the error is
--------------
Error Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Error System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' ---> System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0,
Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
WRN: Assembly binding logging is turned OFF.To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
at EOD_Schedular.frmMain.GenerateReport(Boolean ViewOnly)
at EOD_Schedular.frmMain.Generate(Boolean ViewOnly)
Method Name: GenerateReport
Line: 0
Column: 0
Sql: Not Found
Have an asp application and getting: "Invalid Report File Path" when binding a DataSet.
[Code]....
I am getting below error while generating report using crystal report:
Error in File C:WindowsTEMP
epEnquiry {095737EB-07B4-437D-9E86-85780B7417B0}.rpt:
Access to report file denied. Another program may be using it.
For this i did google and found some solutions but still its not working:
what i tried:
-given full access to aspnet and network services on my root directory and reports folder and then restarted iis.
OS:windows server 2008(64)
vs2008 application.
but still getting same error.
normal way i can create crystal report in asp.net. but its making me problem when i create for asp.net. if a going to see the particular report with particular conditions. in the same way if the another user want to see the same report in other conditions then its making problem. the two reports display the same. conditions as follows:
user 1: want to c report Zone wise sales status
Zone : ABC
User 2: want to c report Zone wise sales status
Zone : CDB
in the web its not working properly, last conditions will be integrated with the two users
I've inherited an ASP.NET web application which displays reports using Crystal Reports. I wanted to add some new fields to one .rpt, but noticed that my changes were not being displayed when the report was called.
Thinking that maybe my changes were to blame, I merely changed some label text on the original; yet my changes were still not reflected in the report displayed by the site.
I have tried:
Resetting IIS
Moving/Renaming the .RPT file (and the site is still able to load the old report) This is mainly what leads me to think I'm confused here.
Starting/Stopping the site
Recycling the App Pool
Deleting ASP.net temp files
Setting Content Expiry on the rpt inIIS
I've only found one (unanswered) similar question here.
I don't know if maybe I'm just not understanding how the report is called, so here is the relevent portion of the code calling BookstoreReport.rpt.
[code]....
I have got a desktop application which was build in vs2005, now i am doing conversion of it to web application (vs2008). i have got around 40 crystal reports in it (desktop application).
tell me can i use them (rpt files) directly in web application or i will have to create all new reports?
How to keep displaying report filters while displaying the report in CrystalReportViewer.I have a web part that which uses CrystalReportViewer to display the report data. I want to keep displaying the Report parameters (filters) as I rendered the report content.
View 1 RepliesI have a report having lakhs of rows, I wana that the report will process page by page. It means when Report run for the first time it will show the first 100 records and after that if user will go to 5th page he will see records from 500 to 600.
Is this possible in SSRS. Also if any one of you explain about On-Demand Report processing then it will be great.