Crystal Reports :: Debug Error "Failed To Retrieve Data From The Database"?
Jul 8, 2010
I have a Crystal Report which was running correctly in Visual Studio. I placed the .rpt file on our Test server and I tried to open it from another application. It is pointing to the same database. We are using SQL Server. It failed with this error:
Failed to retrieve data from the database. Vendor Code 102.
How can I debug this without being able to run the report in the other application? That application was written by another company and I don't have access to its source code.
While calling a crystal report from ASPX i get the following error message:
Error in File C:WINDOWSTEMPReport1 {CB17A4FE-ECB0-4461-AB9C-0E07F8CDDB1F}.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: 102 ]
I have tried to verify the database and then call it again but in vain.
I have a web application designed using VS2008 & Crystal Reports for VS2008 (Ver. 10.5.3700). I'm using Framework 2.0 for deployment.
My development system is WinXp and my deployment system is Win2003 Server.
Here is what i have done -
1) Added a Crystal Report to my project "rptReport.rpt"
2) Added a Crystal Report Source (crSource) to my .aspx page.
3) Added Crystal Report Viewer to my page, with crSource as its Report Source.
This works fine when i run it on my development machine. But Gives a "Load Report Failed" error on my deployment machine. This is what i have already tried doing on deployment server:
1) Giving IIS_WPG full control to temp folder.
2) Publishing with "Allow this precompiled site to be updatable." checked/unchecked.
i have done a crystal report in asp.net. i have a table called c_order it contains cust_id field, so while generating report itself i specified cust_id value but i have put a textbox and a button in the form which contains crystalreportviewer. so i need to enter a value in textbox and press the button then it should get value which match with the value in textbox with database and generate report.
I have an application that uses Crystal Reports downloaded from SAP for Visual Studio 2012.
When I debug the software in Visual Studio it works perfectly fine, but when I deploy it and want to view the Crystal Report, I get the following error:
Server Error in '/' Application.Retrieving the COM class factory for component with CLSID {4DB2E2BB-78E6-4AEA-BEFB-FDAAB610FD1B} failed due to the following error: 80040154.
I wanted to post my problem and solution since I've gotten some good information on this board. When deploying my Visual Studio 2008 C# .NET 2.0 web application Production, I encountered some problems, which is not unusual. What was unusual is that my Crystal Reports .NET reports that use the Report Viewer control would not work; they errored out with:
note: Crystal Report works fine in dev environment....
Logon failed. Details: ADO Error Code: 0x Source: ADODB.Connection Description: Provider cannot be found. It may not be properly installed. Unable to connect: incorrect log on parameters.We are using Oracle 11g 64 bit as database. We establish crystal report database connection by two ways,
1. Microsoft OLE DB Provider for Oracle
2. Microsoft OLE DB Provider for ODBC
but we got the same error in report module when we using two methods.
My reports works fine in my local machine. But when i pushed it to development server to test, it displays the following error:
Failed to load database information. Error in File C:WINDOWSTEMPReportViewer {2E85E5E2-D118-438D-BD62-9B30F2E6E224}.rpt: Failed to load database information. what i need to configure in development server or make changes in my code.
My report does not use data from a database. It uses a code generated dataset. How do I give crystal reports the necessary logon data to avoid database logon failures.
Reports Error when publishing a Website on to the Web Server---- The type initializer for 'CrystalDecisions.Shared.CrystalReportClientScriptManager' threw an exception
I have an vb 2005 asp application that will show a crystal report based upon a user selection which is a job number.On my development machine all work fine and the report is being shown every time.When I publish the application the web server it works for most part. Every so often for selected job numbers the report that will not display. When this happens there is a text being displayed above the business object banner:The Report Application Server failed I have checked the event log and there is no entries. Also there is no stack trace. The application seems to complete normally. I have compared the registry entries in HKEY_LOCAL_MACHINESOFTWARECrystal Decisions and they are the same id evelopment and production. I am referencingCrystalDecisions.CrystalReports.Engine version11.5.3700.0I am clueless and hoping that someone could suggest where to start looking
I just upgraded my development machine from Crystal Reports XI to Crystal Repors XI Rel2 so I could use the Graphic Location feature in CR. When I run my site locally, reports work great. When I deploy to the server, I get "Database logon failed." The Crystal Reports are not connecting to the database. They are connecting to datasets that are populated at runtime. The network admin said he upgraded CR on the server. The references in my solution that work when my app is deployed to the server are version 10.5.3700.0.
The references that do not work are 11.5.3700.0. I have made no other changes to my .net code.
When i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
My Crystal Reports works perfectly when I have it on my local host, once I upload it to the server I get the error listed below. I ran the following MSI on the dedicated server: CRRedist2008_x86.msi.. If it is a permission issue, I am using Plesk Panel so there is no ASPNET user, it is different users, what user and what specific folder do I have to give permissions to? Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 80070005.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 80070005.
ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.
i hv use a crystal report in my web application if i publish my application and run in iis on different system with diff server name the crystal report part cause problem login failed with server as name is alredy defined in crystal report at publish time.Can we define the name of server for crystal report in web.config.
Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a tag within a "web.config" configuration file located in the root directory of the current web application. This tag should then have its "mode" attribute set to "Off". Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's configuration tag to point to a custom error page URL. ----------------------------------- This error will be display when I am try to show the Crystal Report. Can anybody tell me what Property I have to ser in Windows Server 2008 R2 or in IIS7???
i upload my site on server but there is error in crystal report web.comfig there is error as belowParser Error Message:Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
ent system (Windows 7 x64) and live system (Server 2008 x64), and both with IIS7 I receive the following error message, after clicking the "Print" button in the printer selection popup."An error occurred on the server. Printing will be stopped. Would you like to view the error information?"If I click "y
We have migrate from VS2005 to VS2010. CR2010 installed too.
We have 1 website and class project in one solution.
The assembly of web.config has point to new version of CR ver13 and also checked that the references is ver13 too.
WEB CONFIG:
[code]....
However in code behind, when "Go To Definition" the imported CrystalDesicions Namespace, it go to CR version10 location.
The class project has references to correct ver13.
In the end we get error of :
Error 17 The project currently contains references to more than one version of CrystalDecisions.CrystalReports.Engine, a direct reference to version 10.2.3600.0 and an indirect reference (through 'Web_cl.clsAccountRpt.GetAccountStatementSummaryRptDoc') to version 13.0.2000.0. Change the direct reference to use version 13.0.2000.0 (or higher) of CrystalDecisions.CrystalReports.Engine. D:ProjectWebGlobal 4.0Web_developCpAdminReportFormAccountReportModule.aspx.vb 40 28 D:...Web_develop
The function in class has return ReportObject back to the website, because of the website reference did not really point to new version has causes this error. I have checked all references in web.config and project properties all is point to new version, but in program it seems still point to old one.
I have recently tried to develope a crystal report using a clss file, like passing the class variable into report file. Passing the values and displaying was successful but when i click on the printer button or Export button in Crystal report viewer in my Aspx page, It is asking for Database name,Suser id and password for the Class file and which i never assigned and no there is no database to the class ... It is not allowing me to take the print out of the page..
I am displaying crystal report for particular 1 table
For example: in my crystal report i have displayed company name and amount
In that i have done every thing Company wise amount is being showed and total of each company is also been shown and grand total is also displayed i just want to know that can i save the displayed grand total in sql database using crystal report?