My reports works fine in my local machine. But when i pushed it to development server to test, it displays the following error:
Failed to load database information. Error in File C:WINDOWSTEMPReportViewer {2E85E5E2-D118-438D-BD62-9B30F2E6E224}.rpt: Failed to load database information. what i need to configure in development server or make changes in my code.
why i am getting an error when i try to run my reports from a windows server 2003 service pack 2 X64
the reportviewer displays but the following error shows up
Failed to load Database information
Error in file (temporary file that the viewer creates.
I'm getting the "Load Report Failed" Error.
I have a web application designed using VS2008 & Crystal Reports for VS2008 (Ver. 10.5.3700). I'm using Framework 2.0 for deployment.
My development system is WinXp and my deployment system is Win2003 Server.
Here is what i have done -
1) Added a Crystal Report to my project "rptReport.rpt"
2) Added a Crystal Report Source (crSource) to my .aspx page.
3) Added Crystal Report Viewer to my page, with crSource as its Report Source.
This works fine when i run it on my development machine. But Gives a "Load Report Failed" error on my deployment machine.
This is what i have already tried doing on deployment server:
1) Giving IIS_WPG full control to temp folder.
2) Publishing with "Allow this precompiled site to be updatable." checked/unchecked.
I have an error loading a report on my website
[URL]
This code:
[code]...
It generates the error: Load report failed.
What settings should I have on the server.
Currently, I have a page contains a report. But while I need to load the report for several times , the latest one I got the err about
'crystaldecisions.crystalreports.engine.logonexception load report failed'
What's the problem?
While calling a crystal report from ASPX i get the following error message:
Error in File C:WINDOWSTEMPReport1 {CB17A4FE-ECB0-4461-AB9C-0E07F8CDDB1F}.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: 102 ]
I have tried to verify the database and then call it again but in vain.
I have a Crystal Report which was running correctly in Visual Studio. I placed the .rpt file on our Test server and I tried to open it from another application. It is pointing to the same database. We are using SQL Server. It failed with this error:
Failed to retrieve data from the database. Vendor Code 102.
How can I debug this without being able to run the report in the other application? That application was written by another company and I don't have access to its source code.
i upload my site on server but there is error in crystal report web.comfig there is error as belowParser Error Message:Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
[Code]....
though paramerter in crystal report with stored procedure
View 1 Repliesi've one crystal report.i want the report header as "employee database".
i dont want to right click->insert and goto text object and insert.
i've one aspx page and aspx.cs page also.
now i want the "employee database" header to be printed from .cs file.
i dont want to pass by parameter also..
i.e is there any option in .cs file
something like ReportDocument myreport = new ReportDocument();
myreport.Load(MapPath("~/" + "emp.rpt"));
myReport.Reportheader="Employee database";
only thing is from .cs file i want to print the header as employee database.
i dont want by passing parameter also...ReportDocumentsasd myreport = new ReportDocument();
i have using the crystal reports for vs2010. I faced the problem with crystal report for vs2010. we generated a reports form dataset to crystal reports. reports generated fine but i want export or save it asking for credentials...
Error is: "The report you requested requires further information."
I have an vb 2005 asp application that will show a crystal report based upon a user selection which is a job number.On my development machine all work fine and the report is being shown every time.When I publish the application the web server it works for most part. Every so often for selected job numbers the report that will not display. When this happens there is a text being displayed above the business object banner:The Report Application Server failed I have checked the event log and there is no entries. Also there is no stack trace. The application seems to complete normally. I have compared the registry entries in HKEY_LOCAL_MACHINESOFTWARECrystal Decisions and they are the same id evelopment and production. I am referencingCrystalDecisions.CrystalReports.Engine version11.5.3700.0I am clueless and hoping that someone could suggest where to start looking
View 2 RepliesI just upgraded my development machine from Crystal Reports XI to Crystal Repors XI Rel2 so I could use the Graphic Location feature in CR. When I run my site locally, reports work great. When I deploy to the server, I get "Database logon failed." The Crystal Reports are not connecting to the database. They are connecting to datasets that are populated at runtime. The network admin said he upgraded CR on the server. The references in my solution that work when my app is deployed to the server are version 10.5.3700.0.
The references that do not work are 11.5.3700.0. I have made no other changes to my .net code.
in sql i am storing picture information in an image field.
in vs2005crystal report i added this image field.but image is not showing.
When i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
View 2 RepliesMy Crystal Reports works perfectly when I have it on my local host, once I upload it to the server I get the error listed below. I ran the following MSI on the dedicated server: CRRedist2008_x86.msi.. If it is a permission issue, I am using Plesk Panel so there is no ASPNET user, it is different users, what user and what specific folder do I have to give permissions to? Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 80070005.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 80070005.
ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.
i hv use a crystal report in my web application if i publish my application and run in iis on different system with diff server name the crystal report part cause problem login failed with server as name is alredy defined in crystal report at publish time.Can we define the name of server for crystal report in web.config.
View 5 RepliesWe are getting an error when ASP.Net tries to connect to Crystal reports Server.
I am running this in my local PC. The code is developed in .net Framework 3.5. The application is showing the following error.
Retrieving the COM class factory for component with CLSID {E063B04A-CB8B-460E-99D0-F7D8FA2FAAA2} failed due to the following error: 80040154
I am running the .net Framework 3.5 code in my system. AND asp.net version is 2.0
I have an application that uses Crystal Reports downloaded from SAP for Visual Studio 2012.
When I debug the software in Visual Studio it works perfectly fine, but when I deploy it and want to view the Crystal Report, I get the following error:
Server Error in '/' Application.Retrieving the COM class factory for component with CLSID {4DB2E2BB-78E6-4AEA-BEFB-FDAAB610FD1B} failed due to the following error: 80040154.
My report does not use data from a database. It uses a code generated dataset. How do I give crystal reports the necessary logon data to avoid database logon failures.
View 1 RepliesI wanted to post my problem and solution since I've gotten some good information on this board. When deploying my Visual Studio 2008 C# .NET 2.0 web application Production, I encountered some problems, which is not unusual. What was unusual is that my Crystal Reports .NET reports that use the Report Viewer control would not work; they errored out with:
note: Crystal Report works fine in dev environment....
Logon failed. Details: ADO Error Code: 0x Source: ADODB.Connection Description: Provider cannot be found. It may not be properly installed. Unable to connect: incorrect log on parameters.We are using Oracle 11g 64 bit as database. We establish crystal report database connection by two ways,
1. Microsoft OLE DB Provider for Oracle
2. Microsoft OLE DB Provider for ODBC
but we got the same error in report module when we using two methods.
Our Coding : //CrystalDecisions.CrystalReports.Engine.ReportDocument crpt = new ReportDocument();
private ReportDocument crpt = null;
private void Page_Init(object sender, EventArgs e) [code]....
I'm trying to load up my website but I keep getting this error on page loads:
Server Error in '/' Application.
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
Line 17: <compilation targetFramework="4.0">
Line 18: <assemblies>
Line 19: <add assembly="CrystalDecisions.CrystalReports.Engine, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Line 20: <add assembly="CrystalDecisions.ReportSource, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Line 21: <add assembly="CrystalDecisions.Shared, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
I have created a web application with crystal report and it is working fine. But when I am hosting my application it is throwing following exception.
Could not load file or assembly 'CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
it's possible to load external CrystalReports (2008) .rpt files?
I now embed them so they're compiled with my core.
It would be nice if i can make changes to a reports layout without having to recompile anything. Is that possible?
i am havin one join condition in back end and storing the result into dataset and from dataset i am unable to load data into crystal reports nothing is coming only empty report is getting displayed.
View 1 Replies
