I have a form containing both CustomValidators and RequiredFieldValidators. The Custom Validation doesn't fire until all of the requiredFieldValidators have passed. Can someone tell me how to get them to validate at the same time? I want all the validation messages to show when no data is input.
View 1 RepliesI'm using a code I got from CodeProject [URL] about a validator that can monitor 3 form controls. I pasted it to my site, changed it to suite my parameters but seem to encounter a situation that can't satisfy my desire: Instead of making sure that all the 3 DropDownLists are filled without their default value, the validator cares only if at least one has been filled, and if so, he can call it a day. look at this code at tell me what am I doing wrong?
[Code]....
I am using a custom validator for validating two text boxes simultaneously. The scenario is if one text box I filled, the other has to be filled too if not both can be left unfilled. The code for the custom validator is ,
[Code]....
I can set the focus to the text box that is unfilled ie either txtbox1 or txtbox2. In custom validator I can setfocusonerror to only one field. i tried to put the focus statement in the javascript but could not get the result.
i have grid view like this
Code:
<asp:DataList ID="DataList1" runat="server" Width="200%" >
<ItemTemplate>
[code]....
it has been fire two times ,measn code written inside it work twice ,
How It Possible Unpublished Record On Base Specific Time Like 22-03-2011 11:01 Pm All Record Are Unpublished It Is Possible From Sql Server Side.
View 2 RepliesBasically I am using a ModalPopUpExtender and it works fine, except that the OK button has an OnClick event that only fires when it is clicked for the 2nd time.. obviously i can progress with populating my OnClick event method for later on - its just annoying that a user has to click my button then ok in the pop up twice before they can get their intended result!
View 4 RepliesI have a form representing a survey that is dynamically generated based on some database configuration. I have a custom server control for rendering the survey (SurveyRenderer) which contains custom server controls for rendering questions (QuestionRenderers). I dynamically add RequiredFieldValidators for questions if they are flagged as being required. I add these validators to the SurveyRenderer's control collection.
The gist of the code...
// In SurveyRenderer.CreateChildControls()...
foreach (QuestionRenderer questionRenderer in questionRenderers)
{
if (questionRenderer.Question.IsRequired) [code]...
The client-side validation works fine -- if someone has omitted a required question, the validators catch it and the form doesn't validate. However if I turn off JavaScript and submit an invalid form, the validators do not seem to work.On the server-side I am calling Page.Validate() and checking Page.IsValid in the submit button click event handler. Despite submitting a form where required questions have been left blank - something that would be caught client-side - on the server-side Page.IsValid remains True.
// In SurveyPage.aspx...
public void btnSubmit_Click(object sender, EventArgs e)
{
Page.Validate();[code]....
Should I be adding the validators to the Page's Control collection, rather than the SurveyRenderer? How come it works on the client-side but not server-side?
UPDATE: My QuestionRenderer is annotated with:
[ValidationProperty("IsValid")]
And the IsValid get method is like so:
// QuestionRenderer.IsValid
public bool IsValid
{
get [code]...
If I set a breakpoint and step through, I can see that QuestionRenderer.IsValid is being fired OK. It is returning false when it should do. If I go fine-grained and call in btn_submitClick:
// In SurveyPage.aspx...
public void btnSubmit_Click(object sender, EventArgs e)
{
foreach (IValidator validator in Page.Validators)[code]....
So validator.IsValid is true, even though the call to QuestionRenderer.IsValid returns false. So maybe I haven't wired something up correctly? Is using [ValidationProperty("IsValid")] not enough?
I am fairly new to the asp.net and experimenting with it to learn the page life cycle. Here is a problem that I have been unable to resolve for past few days.
I have a hosting page (.aspx). Then I have two user controls (.ascx). The page has a place holder control in which it loads the user controls one at a time based on the application flow. First user control is loaded on application start up. It has a "continue" button. Continue button click loads the Second user control that has two buttons - "Back" and "Submit". Obviously the "Back" button should load the first user control again and Submit button should submit the form data. Pretty simple.
The problem is that the command button event handler that I have on the second user control is not firing the first time. (I have one event handler for both buttons). The load event of the user control fires but then it ignores the button click. If I click it again, then it fires. I re-load the controls on the page in every page_load. Here is some relevent code:
AddPlayer.aspx:
[Code]....
The page_Load fires every time but "CommandBtn_Click" doesn't fire after the first click. I have to do it click it again. It doesn't matter which order I click the buttons.
When i Click Twice in Calendar Cell Date That Make The Event Fire only one time for the first click but the second click not fire the Event CalendarSelectionChanged ... In my Logic i want The Event Fired every Click Even if the clicks happened on the same Cell.
View 2 RepliesI have a page that has a few NumericUpDownExtenders, and the same page has some validation like RequiredFieldValidators. The problem is that when you click either of the arrows for any of the NumericUpDownExtenders, it's causing the page to try to validate. This ia making all the "required" boxes for every required field on the page pop up as if you just tried to submit an empty form.If you don't touch the NumericUpDownExtenders, then the page works exactly as intended. The "required" boxes only pop up if you've gone into one of the required fields, typed something, deleted it, and put the focus in another field.How do I fix the NumericUpDownExtenders to make them stop causing the validation?
View 2 RepliesI'm adding multiple TextBox and DropDownList controls programmatically on Page_Load. Some of them have attached RequiredFieldValidators that are being built programmatically as well. The issue I'm having is that when the Submit button (also added programmatically) is clicked, a postback occurs before the RequiredFieldValidators mark their respective fields as blank. How can I get these to fire client-side like they're supposed to?
View 1 RepliesI am fairly new to the asp.net and experimenting with it to learn the page life cycle. Here is a problem that I have been unable to resolve for past few days.I have a hosting page (.aspx). Then I have two user controls (.ascx). The page has a place holder control in which it loads the user controls one at a time based on the application flow. First user control is loaded on application start up. It has a "continue" button. Continue button click loads the Second user control that has two buttons - "Back" and "Submit". Obviously the "Back" button should load the first user control again and Submit button should submit the form data.
View 3 RepliesI'm working on a asp.net page and I have the following scenario:I have 2 fields that have requiredfieldvalidators which need to "fire" their validation when button1 is clicked but NOT when button2 is clicked and another field which is validated by another requiredfieldvalidator with the opposite scenario. (requiredfieldvalidator for this field needs to "fire" when button2 is clicked but NOT when button1 is clicked.)
View 2 RepliesI have a grid view and a image button in Item templete. when i click first time in this bitton is not fire but i click second time is fire.
View 1 RepliesI have added 3 RequiredFieldValidators in a form which are working fine. I want that when I click the Cancle button, its skips all the Validators and redirect to default.aspx
View 4 RepliesSo am adding fields in the code behind and now want to add required field validators. Kicker, I think comes into play becasue all this is in a master page. So even though I may set the id of the textbox to say tb4, it's no longer tb4. So when I add the required field validator and tell it the control to validate is tb4, I get the yellow screen of death telling me thtat tb4 does not exist... cause it's the long huge master page ID. What do I do?
View 13 RepliesMy web application has hosted on the canada server but my all clients are indians.So, as I am using System.datetime.Now to store all the dates in application.Obviously, it is displaying the canadian time instead of india time.How can i do it?Is there not any gloabl settings that we can do in our web.config file so that it indicates to the server at run time which time zone to execute..?Or any other suitable alternate?
View 3 Repliesi have to listen my mail server for every 30 min. i have a distribution list and i want to count number of email comes for that distribution list and no of replies goes from the outlook for every 30 minutes. also i need to get the time difference between the replied time with arrived time of the mail. so show me some sample code
View 3 RepliesAnyone know how to format a TIME COLUMN in SQL 08 to regular time and not military time? VB.net
View 2 RepliesI'm using Telerik's RadScheduler Control with WebService Binding.
I've used RadScheduler with Server Side Binding which has an event called "OnTimeSlotCreated" which fires every time when a particular time slot creates so that i can access the time slot and get the control (HtmlTableCell Control) to modify it according to the requirement.
But now i'm binding it from client side through WebService which has no such "onClientTimeSlotCreated" event, also these time slots are not having any identity at client side to access.
how to suppress the "AM" in the gridview (template Bind("RideTimeMin", "{0:t}")? Don't tell me to use military time because the function is not "time on a clock"; it's how much time is allowed for a task (in this case the min/max hours & minutes that horses have to complete a 20 mile trail; e.g. 05:00, 05:27, etc). I'm currently accomplishing this in the "ondatabound" function by "..RTmin.Replace("AM","")". I have looked and looked at all the websites that talk about datetime formatting but have yet to find a way to do it upfront in the gridview bind statement.
View 6 RepliesIn my asp.net application I user Microsoft Membership to manage site access security and find the time saved into LastLoginDate is ahead of local time (Eastern Time Zone) 3 hours. What is wrong with it and how to ajust it to local time by application system only such as changing some properties od application?
View 2 RepliesI need to do to the following:
Find if the current time falls within hourly ranges and display the start hour and end hour of that range in labels.
Examples:
If the current time is 8:46am, label startTime would return "8am" and label endTime would return "9am"
If the current time is 10:01pm, label startTime returns "10pm" and label endTime returns "11pm"
If the current time is 12:59am, label startTime returns "12am" and label endTime returns "1am"
I have been working with the C# TimeRange class but not getting what I need.
select distinct tbl.emp_code, b.EmplName, convert(varchar, tbl.punched_date,101) as Punched_date,
(select convert(varchar(8),itbl.PUNCHED_TIME, 114)+', '
from Trn_Capture_Data_New itbl
where itbl.EMP_CODE=tbl.emp_code and itbl.PUNCHED_DATE=tbl.punched_date and itbl.EMP_CODE='4'
and tbl.punched_date >= '03/27/2013' and tbl.punched_date <= '03/28/2013'
for xml path('')) Punched_Time
[Code] ....
I have the above query and that gives me result
Emp_code EmplName Punched_date Punched_Time
4 XXX 3/27/2013 14:22:00, 09:44:00, 10:38:00, 11:01:00, 16:12:00, 18:25:00,
4 XXX 3/28/2013 13:14:00, 09:49:00, 18:02:00,
Now i need to Bind it to gridview, the gridview columns should be
Date,IN,OUT,IN,OUT
In punched time the first one should be IN and second OUT. A employee would have punched several time a day. Based on that I should take maximum punches and bring that of columns as IN and OUT in gridvew dynamically. How to achieve this?
in my application i need to generate/open a popup window automatically at some interval of time, when the user is working at some page in the application, like a alert message
the popup window contains some information which should take from the database,
and the information should be updated automatically when the popup window opens,
i am developing my application with c#.