Data Controls :: Dynamic Insert Statement In GridView Row Creation At Runtime
Nov 27, 2013
In my gridview I have
EDIT RoleUID RoleID Role Desc ....etc columns
each table contains first "EDIT" and then UID column and ID column etc columns contains.
Now i added new row with the code which you posted. But once i click on "Add New" button then the new row added like
EDIT textbox textbox textbox etc
I need INSERT in place of EDIT
and i am displaying textboxes 0 positon of grid
for (int j = 2; j < cellCount; j++)
How to display "insert" and how to put lable with uid and id values which are autogenerated..
View 1 Replies
Similar Messages:
Jan 11, 2010
I have created a gridview at runtime. its working fine when i load the grid first time. after when i am selecting next value from ddl to load grid according to that option(selecting from dropdown list and coresponding values showing in grid) showing error that "A field or property with the name 'datafield name' was not found on the selected data source."
might be i am getting this error becuze the privious value is not being cleared"
View 28 Replies
Aug 20, 2010
how can i add empty editable rows in gridview dyanamically in c sharp web application
View 5 Replies
May 10, 2010
I have a stored procedure (For Eg: sp_GetAvlData) that accepts a number of parameters, 3 of which are TimeFrom, TimeTo (as varchar) and TimeInterval (as int), formulates a Dynamic query and executes itself. So for instance, if I call the proc as follows:
[code]....
dtAvl is the datatable containing the results of my stored procedure.
The next step for me is to make each of the cells (except the cells in the first column) as a Hyperlink so that when clicked upon a cell, it populates 2 textboxes with the selected Timeslot and Name or ID (ID field is not displayed in Gridview). The textboxes are located on the same page but outside of the Gridview control.
The Challenge that I'm facing out here are:
1) As you can see, the field names being generated are not fixed and I have no control over them.
2) Because the field names are not fixed I'm not sure I can implement this using the Templatefields or BoundFields of Gridview.
Is there any way to achieve the Hyperlinking of these cells within the Gridview?
View 3 Replies
Mar 29, 2010
I have gridview control where i have added two templates one template is the dropdown box another one is the text box.
I have common controls (Edit,update,cancel)
In the form i have one button .
On click on the button one new row is created in the grid view
Now how do i fetch the data entered in the dropdown box and the textbox.
How to reload the updated data to the dropdownbox,textbox.
On edit(twice) click it is switching to Update and cancel mode
On Cancel(twice) click it is switching to Edit mode.
View 1 Replies
Sep 8, 2010
I'm trying to build a website for real estate listing. now the data would look like a datagrid. and while clicking on it, it should open under the clicked row the dynamic data related to the specific row. (like an AJAX accordion). this website for example ( ignore the language, couldnt find any better example [URL] Now, i've been told that this works by using "Dynamic Div Creation" which i have no idea how it should work this way. Is it possible to make it work by using an Accordion inside a datagrid? or what?
View 4 Replies
Aug 30, 2010
Below I have a bunch of SQL statements that creates a table at runtime and the "pic" column is a dynamic column and the code creates the number of "pic" columns depending on the count of the uploader control. the problem comes when I try to insert into that table and I am trying to say for every "pic" declare variable @pic....
it works well for just one file in the uploader but for multiple files i get the following error
The name "pic1" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Directory.CreateDirectory(MapPath(".") & "port" & clientname.Text & "")
Dim objConn As New SqlConnection("Data Source=xxxxxxxxx.hostedresource.com; Initial Catalog=mrpoteat; User ID=xxxxxxx; Password=xxxxxxxxx;")
objConn.Open()
Dim strCommandText As String = ""
[Code]....
View 1 Replies
Sep 25, 2010
have a very important issue,i have three Stored Procedures Sp1,Sp2 and Sp3 .the first one (Sp1) will execute the second one (Sp2) and save returned data into @tempTB1 and the Second one will execute the third one (Sp3) and save data into @tempTB2.if I execute the Sp2 it will works and it will returned me all my data from the Sp3 ,but the problem is in the Sp1, when i execute it it will display this Error:INSERT EXEC statement cannot be nested I tried to change the place of execute Sp2 and it display me another error:Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
View 4 Replies
Feb 10, 2011
what are the steps for a role based menu using sitemap and sql server database.
View 1 Replies
May 20, 2010
I have a Winform that has fields need to be filled by a user. All the fields doesn't belong to one table, the data will go to Customer table and CustomerPhone table, so i decided to do multiple inserts. I will insert appropriate data to CustomerPhone first then Insert the rest data to Customer table.
View 3 Replies
Aug 4, 2010
i am new to asp.net programming i am trying to insert data into access db from asp.net web form but it is showing error as
Syntax error in INSERT INTO statement.
my code is :
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
View 5 Replies
Mar 2, 2011
I have a Formview that allows applications to be inserted into a database. Text boxes such as Name, Address, etc. are bound to the database. I'd like to have the text fields checked for proper case and changed if necessary before writing to the database.
I don't care about notifications, or specialities (such as handling McK..). Looks like the strconv() would work, but I'm not sure how to use it - Still pretty new to using this!
View 1 Replies
Dec 15, 2010
I have a project that I was using Access for but now find I have to change to SQL Express. Well I have no big problem with that but I now find that the SQL Statement I have been using was for OLE and does not work in SQL/Express. I am not even sure anymore if I can dump the entire CSV file in at one time? The statement I was using is below.
[Code]....
Here is my problem. What is the INSERT statement to insert a complete flat (CSV) into SQL Express? OR what method can I use to preform this task?
View 2 Replies
Jan 28, 2010
I have a two buttons ( button1 and button2 ), a panel ( panel1 ), a label ( labe1 ) on my Web page ( coded with asp.net and c# ). I want to create 2 textboxs on my page when I click on button1 ( button1_click ).
After that, when I click button2 ( button2_click ), I want to get data of textbox (added on runtime) and write them on label1.
This application is part of my master application. This is very important for me...
View 8 Replies
Nov 8, 2010
I had successfully created a functionality where I can dynamically add rows and columns to a asp table by creating/re-creating controls on every page load.
I have 2 buttons - Add rows and Add columns that, basically according to a asp.,net page life cycle, occur in the following order and work perfectly fine.
Page load is fired and controls along with their viewstate are recreated. In Add row button click event - I just create a new table row and add controls to each cell dynamically.
Same thing with Add column, Delete Row and Delete Column button click events.
However, now I added a Dropdown which when its index is changed needs to retrieve values from the database and create controls based on those values and then also bind the Db values.
But it doesn't work correctly since the asp.net page cycle cannot capture the dropdown's selected value in page_load as the page_load fired first and then the selectedindexchanged event is fired later, the controls are not created.
I don't know how to handle this scenario and incorporate it into my existing code.
View 3 Replies
Feb 17, 2010
I am Developing a database web applicationI am Creating web controls on page at runtime i.e in Page_Init event. No textbox are placed on .aspx page at design timeI have a datatable filled with a single record.now i want to bind a textbox (created at runtime) with a column of datatable so that when a page is loaded value in datatable's column is displayed in textbox.Other Important thing i want is when i make any changes in Textbox, It should be reflected automatically in a column to which textbox is binded. So while saving records i can save it directly from datatable. I dont want to write following tedious code before savinge.g.
DataRow mDr = Datatable.NewRow();
mDr["EmpId"] = TxtEmp.Text
mDr["EmpName"] = TxtEmpName.Text
Datatable.Rows.Add(mDr);
View 12 Replies
Feb 1, 2010
Is there a way to run an SQL statement (or stored procedure) at the successful completion of a Create User process?I'd like a user to be able to create their login profile and upon completion automatically run a SQL statement to pre-populate some other tables.I'm using 3.5 and the have a create user wizard control on my page. I'm working in VB, and am a bit of a n00b with it.I'm thinking I need an onClick somewhere, but frankly I'm not sure how to go about writing it.
View 2 Replies
Oct 7, 2010
I have been tasked with producing a web application for a new client. What they're looking for requires a Gridview with slave Detailsview within an Update Panel.
I produced this, including the Gridview in markup, as follows:[Code]....
[Code]....
However, although it works, it's been requested that I move most of this to code behind (for easier maintenance), which is causing me a few headaches.
What is the correct option here, since I see many potential methods?
Should I create an instance of the Gridview and Update Panel in markup, then define all events and columns in code behind? Create a new Gridview entirely in code behind and place it within the Update Panel? Create both in code behind?
View 8 Replies
Aug 2, 2010
I think I've created and instantiated my first custom class. I'm pretty darn excited! Been reading up on it, I think I did it right but I'd like someone to double check. I'm trying to collect question ID's and associated answer values from a databound gridview and then insert them into the database.
I have two questions:
-Did I set up and instantiate the new class correctly? (also will need to access the class on other webpages)
-Am I ready for the next step of inserting into the Database with LINQ or is there something else I need to do?
[Code]....
View 5 Replies
May 5, 2010
We have an application developed on VS2008 [Asp.Net & C#], in this application we provide the facility to the user to write his/her business logic code. For that purposes we maintained a Businesslogic.cs file where user can write his/her code and our application build it as a BusinessLogic.dll file at runtime.
But the problem is when we introducing Linq statement/code into the BusinessLogic.cs file then it generated compilation error [CS1026 ].
Note that, when we build the dll from VS2008 environment then it working fine with the same code which we write into the BusinessLogic.cs & don't generated any compilation error.
View 8 Replies
Oct 9, 2010
If there's a better way to accomplish what I'm attempting I haven't found it yet. That being said, I have create a gridview like the one here,[URL]And with some minor tweaking it working great for all my fields, checkboxes, etc. The issue is my last column is another gridview, and I'd like it to function the same. that is, a dynamic gridview inside of a dynamic gridview. I get that I have to create it initially with null values or it won't show up. I guess what I'm having trouble figuring out is instead of go will null data in the parent gridviews column, do I place my blank child gridview. Do I create and bind the child gridview first, or second. Generally just not sure. Also, as far as storing the data from the child gridview goes, will each one need it's own datatable?
[Code]....
[Code]....
View 5 Replies
Dec 11, 2013
I have a Webform with a TextBox (Static) and 3 TextBox (Dynamic - based on the following article: [URL].... )
How to use this scenario with a single GridView table?
Based on the User input, the GridView might have (1 + 3) columns; (1 + 6) columns; (1 + 9) columns; ...etc.
View 1 Replies
Feb 4, 2011
In my application i placed a button.While clicking on button i need to generate one dynamic textbox.For every click i need to generate textbox. Ex: For the first time if i click on button i need to generate textbox.If again i click on the button i need to generate one more textbox.
View 2 Replies
Jan 17, 2011
As the title says , i'm looking for some kind of technology that allows me to dynamicly add & remove usercontrols.Without a postback ofcourse :)A link would be awesome , example code would be super!
View 1 Replies
Oct 27, 2010
I have a table created on the front end of my code called "tblSearchlist". In my code behind I have the following.
[Code]....
All this code works fine. What I want to do now is insert another dynamic table within cell1. Any ideas how to do this. This process can be done on the front end like so but I need it in code behind.
[Code]....
View 1 Replies
