below is a sub I wrote to run an SQLDataSource UpdateCommand. This is customized layer of a createUserWizard. I know I should probably have another table for the addt'l data and just FK the UserId...but I'd rather update the existing record and add the data to the existing row in the user (membership) table.
what I'm doing wrong on this sub. The error is at the last line, "DataSource.Update()"
[Code]....
I am working with a sql server database with about 50 stored procedures. The database and stored procedureswere not created by me. The stored procedures all begin with a number in their name.
Example: 17P_Comsetter
The problem I am having is that if I try and execute the stored procedure at the command line in Query Analyzer,the query analyzer appears not to like that the stored procedure begins with a number. For example:
If I try an run the stored procedure as follows:
EXEC 17P_Comsetter
Then I get the following error message:
Msg 102, ..... Incorrect Syntax near '17'
I am using SQL server 2005. Does anyone know why I am getting this error message?
[Code]....
Stack Trace:
[Code]....
[code]....
getting Incorrect syntax near error
I hv Writte nA sql Query in whic hi want to use an Inner join as well as THe left OUter Join in it ..i hv written it in the sql server it executes properly.but when i run the same code ..from my application .it starts gving the Error Incorrect Syntax Near Keyword INNER..
[code]....
I am getting a strange error message;
Incorrect syntax near '>'.
I made a listview with some dropdownmenu and selectboxes to select from untill the query shows in the listview.
Now the query goes well and shows the first page of 4 rows as I wanted it.
The pager shows 5 pages and if I a want to click on the next page I get this message.
Incorrect syntax near '>'.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '>'.
Source Error:
[Code]....
Stack Trace:
[Code]....
[SqlException (0x80131904): Incorrect syntax near '>'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +2030802 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +5009584 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() +234 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2275 System.Data.SqlClient.SqlDataReader.ConsumeMetaData() +33 System.Data.SqlClient.SqlDataReader.get_MetaData() +86 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +311 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +987 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +162 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +32 System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +141 System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +12 System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +10 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +144 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +319 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1618 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +21 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +143 System.Web.UI.WebControls.ListView.PerformSelect() +113 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +74 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +66 System.Web.UI.WebControls.BaseDataBoundControl.OnPreRender(EventArgs e) +22 System.Web.UI.Control.PreRenderRecursiveInternal() +103 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Control.PreRenderRecursiveInternal() +175 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2496
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<asp:SqlDataSource ID="SqlDataSource4" runat="server"
ConnectionString="<%$ ConnectionStrings:AvcilarEvleri %>"
SelectCommand="SELECT * FROM Tabel1 WHERE ((([Regio_Object] = @Regio_Object) AND ([Plaats_Object] = @Plaats_Object) AND ([Wijk_Object] = @Wijk_Object) AND (Prijsklasse => @Prijsklasse1) AND (Prijsklasse <= @Prijsklasse2)
AND (Prijsklasse => @Prijsklasse3) AND (Prijsklasse <= @Prijsklasse4 AND (Oppervlakte_Object => @Oppervlakte_Object1) AND (Oppervlakte_Object <= @Oppervlakte_Object2)) AND ((Type_Object = @Type_Object1) OR (Type_Object = @Type_Object2) OR
(Type_Object = @Type_Object3)))">
<SelectParameters>
<asp:ControlParameter ControlID="DropSehir1" Name="Regio_Object"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropIl1" Name="Plaats_Object"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropDownList5" Name="Wijk_Object"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat1" Name="Prijsklasse1"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat2" Name="Prijsklasse2"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat3" Name="Prijsklasse3"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropFiyat4" Name="Prijsklasse4"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropMetre1" Name="Oppervlakte_Object1"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropMetre2" Name="Oppervlakte_Object2"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="CheckBoxList1" Name="Type_Object1"
PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="CheckBoxList1" Name="Type_Object2"
PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="CheckBoxList1" Name="Type_Object3"
PropertyName="SelectedValue" />
</SelectParameters>
</asp:SqlDataSource>
And the code;
Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
Panel1.Visible = False
Panel4.Visible = False
Panel5.Visible = False
Panel6.Visible = False
Panel7.Visible = False
Panel8.Visible = False
Panel9.Visible = False
Panel10.Visible = False
Panel2.Visible = True
Panel3.Visible = True
Dim strchklist As String = ""
Dim li As ListItem
For Each li In CheckBoxList1.Items
If li.Selected Then
strchklist += ",'" & li.Value & "'"
End If
Next
If strchklist = "" Then
Response.Write("No item Selected")
End If
SqlDataSource4.SelectCommand = "SELECT * FROM Tabel1 WHERE ([Regio_Object] = @Regio_Object) AND (Plaats_Object = @Plaats_Object) AND (Wijk_Object = @Wijk_Object) AND (Prijsklasse >= @Prijsklasse3) AND (Prijsklasse <= @Prijsklasse4) AND (Oppervlakte_Object
>= @Oppervlakte_Object1) AND (Oppervlakte_Object <= @Oppervlakte_Object2) AND Kamers_Object IN (" & strchklist.Substring(1) & ")"
SqlDataSource4.DataBind()
End Sub
I am sure it has something to do with the query because and with the checkboxes.
see this code.
[Code]....
"Tbl_Name" is a varaible contain tables name for delete records on an table(at a time Tbl_Name change table name by drop down list)
problem: in SCommand.ExecuteNonQuery() error appear:incorrect syntax near Tbl_Name (i use ado.net connection)
Can someone please tell me what normally causes this error message (stack trace at bottom of this post)? I can't even tell what line or what page is producing the error.
Following are the relevant (I think) 2 code procedures...the Update command below seems to "work", because later I see that the image is updated---but I can't immediately see that: I get the above error message.
'FormView.ItemUpdating Event
Protected Sub AdvertisementForm_ItemUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.FormViewUpdateEventArgs) Handles AdvertisementForm.ItemUpdating
' Get the connection string from Web.config.
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("MyDatabaseConnectionString").ToString())
' Create a command object.
Dim cmd As New SqlCommand()
' Assign the connection to the command.
cmd.Connection = conn
' Set the command text
' SQL statement or the name of the stored procedure.
cmd.CommandText = "UPDATE Advertisements SET UserName = @UserName, Age = @Age, Avatar = ISNULL(@Avatar, Avatar) WHERE UserId = @UserId"
' Set the command type
' CommandType.Text for ordinary SQL statements;
cmd.CommandType = CommandType.Text
' Get the person ID, first name and last name from the
' EditItemTemplate of the FormView control.
Dim strUserId As String = DirectCast(AdvertisementForm.Row.FindControl("UserIdTextBox"), TextBox).Text
Dim strUserName As String = DirectCast(AdvertisementForm.Row.FindControl("UserNameTextBox"), TextBox).Text
Dim strAge As String = DirectCast(AdvertisementForm.Row.FindControl("AgeTextBox"), TextBox).Text
' Append the parameters to the SqlCommand and set values.
cmd.Parameters.Add("@UserId", SqlDbType.UniqueIdentifier).Value = Guid.Parse(strUserId)
cmd.Parameters.Add("@UserName", SqlDbType.NChar).Value = strUserName
cmd.Parameters.Add("@Age", SqlDbType.NChar).Value = strAge
' Find the FileUpload control in the EditItemTemplate of
' the FormView control.
Dim uploadAvatar As FileUpload = DirectCast(AdvertisementForm.FindControl("uploadAvatar"), FileUpload)
If uploadAvatar.HasFile Then
' Append the Picture parameter to the SqlCommand.
' If a picture is specified, set the parameter with
' the value of bytes in the specified picture file.
cmd.Parameters.Add("@Avatar", SqlDbType.VarBinary).Value = uploadAvatar.FileBytes
Else
' Append the Picture parameter to the SqlCommand.
' If no picture is specified, set the parameter's
' value to NULL.
cmd.Parameters.Add("@Avatar", SqlDbType.VarBinary).Value = DBNull.Value
End If
' Open the connection.
conn.Open()
' Execute the command.
cmd.ExecuteNonQuery()
End Using
' Switch FormView control to the ReadOnly display mode.
AdvertisementForm.ChangeMode(FormViewMode.ReadOnly)
' Rebind the FormView control to show data after updating.
BindFormView()
End Sub
Private Sub BindFormView()
' Get the connection string from Web.config.
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("MyDatabaseConnectionString").ToString())
' Create a DataSet object.
Dim dsPerson As New DataSet().
' Create a SELECT query.
Dim strSelectCmd As String = "SELECT UserId, Avatar FROM Advertisements"
' Create a SqlDataAdapter object
Dim da As New SqlDataAdapter(strSelectCmd, conn)
' Open the connection
conn.Open()
' Fill the DataTable named "Advertisements" in DataSet with the rows
' returned by the query.
da.Fill(dsAdvertisements, "Advertisements")
Dim dsAdvertisements As DataSet = New DataSet()
' Bind the FormView control.
AdvertisementForm.DataBind()
End Using
End Sub
Server Error in '/www.mywebsite.com' Application.
Incorrect syntax near ','.
[Code]....
Stack Trace: [Code]....
i am making a shopping cart and i am receiving this error when tryin to add a product to an order. Incorrect syntax near the keyword 'Order'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'Order'. Source Error:
[Code]....
Source File: c:UsersPerk-OnDocumentsVisual Studio 2008WebSitesestApp_CodeCart.cs Line: 69 Stack
Trace:
[Code]....
Here is my createorder method in the cart class:
[Code]....
public string CreateOrder (string userid)
I have this SqlDataSource:
[Code]....But when I click Button Update this error occurred:
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.
I am getting these errors when compiling => Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'AS' Msg 156, Level 15, State 1, Line 6 Incorrect syntax near the keyword 'DECLARE'.
SET ANSI_NULLS
ON
SET QUOTED_IDENTIFIER
ON
GO
AS
ALTER PROCEDURE [dbo].[Z_DQA_LOAD_RECIPE]
DECLARE @instbl
varchar(50)
SET @instbl
=
'Z_DQA_'
DECLARE @instbl_def
varchar(50)
SET @instbl_def
=
'Z_DQA_'
DECLARE @updttbl
varchar(20)
DECLARE @Run
int
DECLARE @Defect
int
DECLARE @Test_Num
int
DECLARE @Test_Desc
varchar(50).............................
I wrote a select statement such as:
[Code]....
I have a GridView on my web site where column "Tariff Description" I have configured as DropDownList where two values are included. When user updates client details, I want him to be able to assign Tariff from those two values. When I click Edit on user details, change one tariff value to another and click Update, I get "Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'FROM'." error message. Following is a code I use:
[Code]....
I'm getting an error that has me stumped. I suspect the problem is that I've defined a few tables with columns names that have embedded spaces, something that SQL Server allows, but I'm seriously wondering if ASP.NET WebForms has a problem with embedded spaces in column names. Anyway, I've got a SqlDataSource control on a page with a details view control, which allows for inserting and editing of the table. Here's the table's definition:
[Code]....
The ASP.NET code defining the SqlDataSource is as follows:
[Code]....
Here's what I've got in the detail view's Inserting event:
[Code]....
When I run it, I get the error "Incorrect syntax near 'smallint'". I've run SQL Server Profiler and have found the following (naturally, it was all on 1 line, but I've reformatted it to make it look better):
[Code]....
As you can see, as far as I can manage things, every possible parameter has a properly defined value. So, frankly, I'm lost as to what's wrong; what's causing the error.
I am trying to use this code:
[Code]....
And i get this error:
Incorrect syntax near the keyword 'AS'. What i am trying to do is SELECT details of a job and also SELECT which region the job is in. I currently have this: [URL] But i need to change it so it shows the Job name, details and then the regions..
I will declarate a attribute, but it gives me an error
This query works fine and returns 1 record from type int:
SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC
And when I will declarate a attribute/parameter it gives me an error:
DECLARE @dataObjectVersionId INT
SET @dataObjectVersionId = SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC
Error message:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'SELECT'.
this is my code for binding a gridview on based of two dropdownlists selected choices.
protected void Bind_NBD()
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["contest"].ConnectionString);
con.Open();
StringBuilder sub = new StringBuilder("select * from mtblNBD where (1=1)
order by Deadline desc");
SqlCommand com = new SqlCommand(sub.ToString(), con);
if (ddlDivision.SelectedValue != "0")
{
sub.Append(" and Division = @Division");
com.CommandText = sub.ToString();
com.Parameters.AddWithValue("@Division", ddlDivision.SelectedItem.Text);
;
}
if (ddlGroup.SelectedValue != "0")
{
sub.Append(" and GroupIn=@GroupIn");
com.CommandText = sub.ToString();
com.Parameters.AddWithValue("@GroupIn", ddlGroup.SelectedItem.Text);
}
SqlDataAdapter da = new SqlDataAdapter(com);
DataTable dt = new DataTable();
da.Fill(dt);
if (dt.Rows.Count > 0)
{
GridView1.DataSource = dt;
if in this query StringBuilder sub = new StringBuilder("select * from mtblNBD where (1=1) order by Deadline desc"); I remove the bolded part "order by Deadline desc" then it works good. but with this part the result is with an error. Incorrect syntax near the keyword 'and'. what causes the error.
I get this error: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'IN'. this is my code:
[Code]....
When I use the sqldatasource select paremeters like that:
<asp:SqlDataSource ID="dtsrcHotAreaLabor" runat="server"
ConnectionString="<%$ ConnectionStrings:ContentMiningConnectionString %>"
SelectCommand="SELECT * FROM [HotAreaLabors] ORDER BY [Date] where [UserAlias]=@UserAlias"
UpdateCommand="UPDATE [HotAreaLabors] set [Date]=@Date,[LaborType]=@LaborType,[Comments]=@Comments where [lid]=@lid and [UserAlias]=@UserAlias"
DeleteCommand="DELETE FROM [HotAreaLabors] WHERE [lid]=@lid and [UserAlias]=@UserAlias"
onselecting="dtsrcHotAreaLabor_Selecting">
<SelectParameters>
<asp:Parameter Type="String" Name="UserAlias"/>
</SelectParameters>
<UpdateParameters>
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="UserAlias" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="Date" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="LaborType" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="Comments" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="lid" />
</UpdateParameters>
<DeleteParameters>
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="lid" />
<asp:Parameter ConvertEmptyStringToNull="true" Type="String" Name="UserAlias"/>
</DeleteParameters>
</asp:SqlDataSource>
And
protected void dtsrcHotAreaLabor_Selecting(object sender, SqlDataSourceSelectingEventArgs e)
{
e.Command.Parameters["@UserAlias"].Value = Profile.UserName;
}
When I run this page, I got the error "Incorrect syntax near the keyword 'where'."
i have a radiobutton list and i want the select statement of a SqlDataSource to change according to which radiobutton is selected. My code is as follows
[Code]....
It is giving me the following error when i put jon in the Text Box provided for searching Incorrect syntax near 'kae'. Incorrect syntax near 'Jon'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'jon''.Source Error:
[Code]....
Line 29: query = query + "WHERE ([Ufname] LIKE '%'" + txtSrch.Text + "'%')";
Line 30: SqlDataSource1.SelectCommand = query;
Line 31: SqlDataSource1.Select(DataSourceSelectArguments.Empty);
Line 32: }
Line 33:
Server Error in '/' Application.
Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near ')'.
Source Error:
[Code]....
Line 25:SqlDataAdapter sda = new SqlDataAdapter(cmd);Line 26:DataSet ds = new DataSet();Line 27:sda.Fill(ds);Line 28:Label1.Text = ds.Tables.Count.ToString();Line 29:
I keep getting the error: 'Incorrect Syntex near 'treatmentMedication'. Syntex error:
[Code]....
This is my class code:
[Code]....
basically i created a form to suspend or activate user accounts in sql:
UPDATE membermanagement2
SET blnIsActiveST='True'
WHERE intUserIdUS= pintUserID
when i test this form on SQL server 2005 it works!!! but when i bring it over to visual studio... this error always comes out
there are 3 forms involve in this
[code]....
Here is the update query which i am using to update a table. It throws me an exception "Incorrect Syntax near Where" Why is that exception for?
[code]....
I have a UDF called Split which accepts a comma separated list and returns a table variable splitting the values in a row. So for ex if I call the function
Select * From dbo.Split('100,287,312', ',')
The output of this query will be
ID-----Value
1------100
2------287
3------312
Now I am trying to use cross apply to return each row for each csv but I am getting an error Line 3: Incorrect syntax near 'apply'.
Here is my query
select c.course_id, c.course_title, b.*
from course c cross apply dbo.[Split](c.foreign_lang_equiv_course_id, ',') As b
SELECT *
FROM Customers
WHERE Region is null
FOR XML PATH('Customer'), ROOT('doc')
getting incorrect syntax nr path