DataSource Controls :: Selecting And Updating To SqlDataSource?
Mar 15, 2011
I have three controls a textbox, a drop down and a check box on a webform as below;
[Code]....
I have an SqlDataSource defined and configured with SELETC and UPDATE commands as below;
[Code]....
How can I;
1. Query the SqlDataSource for a specific record (ie ApplicantID = some value) and then read the selected data in the three controls on the webform?
2. Update user changes from the three webform controls back to the SqlDataSource?
View 4 Replies
Similar Messages:
Feb 25, 2010
i have two sqldatasource controls. one i use to display data in textbox's ,filter'd by a select parameter in page behind code. Once checked, i want to copy this data to the other datasource ,by selecting checkbox.Then display this data in detailsview control.
At present the two datasource controls declared , render data to the page simultaneously during pageload. I want to first check data in textbox's from first source, before second datasource is rendered to screen. note, both are filtered by a page variable. i wish to leave the textbox datasource control in situ, as other controls and code depend on it.The other detailsview datasource is my problem?
View 1 Replies
Oct 10, 2010
I just need to know how to select in c# select from my sql server database for the purpose of seeing if data already exists.. do not need to display the data (i know how to select the data and display it in a data grid) but I am checking to see if dates are already in the database before performing an insert since there can not be duplicate dates... it is late but I only can figure out how to use the data as it applies to viewing or if bound to a control. Also I am not using the aspx... in tags... my c# is seperate... do I have to use a stored procedure just to see if the row exists???
View 5 Replies
Feb 17, 2010
I have a pretty simple page with a GridView, a DropDownList as a filter to the GridView, DropDownList is named with ilce. ilce binds with sqldatasource and i ihave a void it is named basvuruIslemleri. ilce drowdownlist runs correctly but if call basvuruIslemleri in page load event like this
[Code]....
I have a null references error at this line. komut.Parameters.Add("@ilceID", Convert.ToInt32(ilce.SelectedValue));
My question is i can change order Page Load with Sqldatasource.selecting ?
[Code]....
View 7 Replies
May 14, 2010
I am trying to tie a sqlDatasource to a Stored Procedure. The stored procedure looks like...
[Code]........
View 2 Replies
Dec 13, 2010
I am using a stored procedure for a sqldatasource to update a formview. I believe that I am passing the Obligation_Status value correctly to the stored procedure but the oblgation status field is always updated AS NULL in the database. Does anyone know what I am doing wrong?
[Code]....
[Code]....
View 2 Replies
Jan 1, 2010
this is the code
<%
@
Page
Language="VB"
AutoEventWireup="false"
CodeFile="Default.aspx.vb"
Inherits="_Default" %>
[Code]....
View 2 Replies
Jun 10, 2010
I'm having a strange problem - probably has a simple answer but, I haven't been able to find it or figure out the cause. I'm hoping someone has had this same problem and figured it out.
Basically - my application works great on the development machine. So I copy it over to the server and it works great. Come back the next day and my GridView is only displaying the first record...I then log into the server remotely and open the web page on the server and all records are returned, so the application works fine on the server. I then return to the local machine and now the application is returning all rows in the GridView. So, weird but, what whatever, it works. Go away and come back again the next day and...
1 ) Only 1 record from dataset is displayed in GridView
2 ) Log onto server remotely and view webpage on server --> all records now display
3 ) Try again on local machine, now application works fine...grr. What am I doing wrong here? Using Visual Web Developer 2008 on Windows XP. Querying SQL Server 2000 (I know, I should switch to 2005 and use VWD 2010 - but ouch, really!) when a text box value changes (Vendor_PO_TextBox.TextChanged)
[Code]....
View 1 Replies
Apr 10, 2010
I'll try to explain what I'm doing the best I can, but I'm pretty new to asp.net so be patient with me. I have a SqlDataSource which returns a simple select statement based on the WHERE clause using @COURSE_ID
What I want to-do is every time any one of 2 (this will change as it's going to be generated) asp:LinkButtons are pressed, they will change the @COURSEID value which i'd like to associate with the specific button.
Buttons:
<asp:LinkButton ID="LinkButton2" runat="server" onclick="MenuUpdate_Click">Course1</asp:LinkButton>
<asp:LinkButton ID="LinkButton1" runat="server" onclick="MenuUpdate_Click">Course2</asp:LinkButton>
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:connString %>" SelectCommand="SELECT Chapter.chapterName, Chapter.chapterID
FROM Chapter
WHERE Chapter.courseID = @COURSE_ID
">
C#
protected void MenuUpdate_Click(object sender, EventArgs e)
{
Parameter p = SqlDataSource1.SelectParameters["COURSE_ID"];
SqlDataSource1.SelectParameters.Remove(p);
SqlDataSource1.SelectParameters.Add("COURSE_ID", THIS NEEDS TO BE VALUE ASSOCIATED TO BUTTON);
ListView1.DataBind();
UpdatePanel1.Update();
}
If anyone has any suggestions that'd be great, I've been trying lots of different things all night with no success :(
View 1 Replies
Feb 8, 2011
I have to use SQLDataSource for inserting, updating and deleting in database through gridview instead of using SqlDataAdapter and SqlCommand object. I have to do it in ADO.NET (means C# code).
View 3 Replies
May 18, 2010
I have a table in which a field consists of a multiple values like CSE, INF, ECE etc., I want to take only one value from the field like
When an user selects a particular branch like CSE, the user should get the list of Colleges assosiated with the branch CSE. How to do this?
View 3 Replies
Mar 20, 2010
im using this query to select Movies from my DB
[Code]....
now thee thing is it returns only the exact value, and im tryying to get to a point where
the user puts only a letter or maybe part of the movie name and get the results by that
and not only if he puts the exact value, if anyone could should me the right sql syntax i'd be happy.
View 3 Replies
Apr 23, 2010
I am trying to do something I thought would be simple but something isn't working for me.
I have a DataTable that I need to sort by a price ascending, then select an 'nth' row value. The 'nth' value is the row count/10.
[Code]....
What happens is I get the "nth" value from the original tblDeals.
View 1 Replies
Sep 29, 2010
Scenario:
I am creating a custom gridview control which has a custom CheckBoxTemplateField column (deriving from TemplateField class). This template field column has custom Checkboxheadertemplate (implementing ITemplate) and CheckboxItemTemplate (also implementing ITemplate). In InstantiateIn method of both templates (header as well as Item template), I am adding a checkbox control which has Autopostback = true.
My requirement is:
I want to mark all the values in the binding column of datasource if checkbox in headertemplate is checked. I dont want to mark only rows visible on grid. I WANT TO MARK ALL ROWS IN DATASOURCE. I want to do this in _CheckedChanged event of checkbox in header template.
Problem I am facing: When I check/uncheck the checkbox in header, it postbacks. so in OnCheckedChanged event, gridview's datasource is null. Secondly, in any event of gridview, I could access only those rows of datasource for which corresponding rows are visible in gridview through Gridviewrow.DataItem property. But I want to set it for all rows in datasource.
View 5 Replies
Jul 8, 2010
I am having a staff table which contain staff information on it. To search staff information from the table, I want to prefer filter style. For example in the select query I want to display staff information according to three criterias. Select staff information from all sections, Select staff information from a given section, select staff information by a given Name. All these selects must be performed in a single select statement. Suppose,
SELECT * FROM StaffDetailsTbl
WHERE SectionID = CASE WHEN @SectionFilter IS NULL THEN [SELECT ALL]
ELSE SectionID = @SectionFilter
and Name = CASE WHEN @NameFilter IS NULL THEN [SELECT ALL]
ELSE Name Like '%@NameFilter%'
Where Declared variables are parameterized stored procedure values retrieved from the user.
View 2 Replies
May 7, 2010
I would like to select some columns from a Datatable, I mean, something like Select Name, Surname, ID,
I'm trying to do something like this:
DataTable dtExcel = new DataTable();
DataRow[] buena = dtExcel.Select("NAME");
in order to get only a view or table with one column (NAME).
View 1 Replies
Aug 26, 2010
I have a gridview, based on thsi datasource:
[Code]....
Using a dropdownlist, I can filter (by changing datasource) the results based on customer names in a dropdownlist. This datasource, working perfectly, looks like this:
[Code]....
Now, using a textbox and a ajax calendar, I would like to be able to filter on the date as well, but my datasource so far:
[Code]....
doesn't work very good. In some case sit doesnt show anything, in onther situations - with 10 records for a given date, it only shows one.
Question one: How do I make the last datasource work? Its probably - again-again - something with the datetime formats, but for the life of me, I can't see how to do.
Question two: The Ideal solution would be using the first datasource, SqlDataSourceAllLoads, and then be able to filter the results with filterexpressions/parameters, but again, how? The filterparameters would origin from a DropDownListKunder, matching the tblDeliveredInfo.deliveryInfo_FirmaNavn as seen in the second datasource, while the date comes from the textbox txtStartDate (databinding fired by a button).
View 3 Replies
Sep 19, 2010
I'm having an issue coming up with an appropriate code design to implement a search page using linq to sql for my DDL. I think the best way for me to explain where I'm at is describing what I've done in the past, before linq. Lets say we have a basic search page with various user input controls for search options... for simplicity, let's say there are two main ways the user can search.
1. a dropdown filled with account numbers. When that drop down is changed and an account number is selected, a gridview needs to be populated with all the records for that account.
2. the second way is a dropdown for choosing what field you want to search, a textbox for entering what you want to search for, and a button to execute that search. In the past, just using straight ado.net
I would handle each of these two search options separately within the events of the dropdown list and the button, respectively. In selectedIndexChanged for 1, and in the buttonClick event for 2, I would construct my sqlCommand etc., ultimately returning a dataset or datatable which I would then bind to the gridview. The logic was separated by the two different event handlers. Now, fast forward to linq to sql and I have a similar page layout, but I am using the linqdatasource selecting event to build my where conditions. Now the difference is *everything*, all the logic, is now in this one event handler, which search option did the user run? Could I somehow craft an IQueryable <T> within each of the input controls event handlers (like the button click, or selectedIndexChanged of the dropdown) and pass that in to the linqdatasource's selecting event? that way my logic stays logically separated...
further, after this initial search is done and results are bound to a gridview, I have several other dropdown lists that appear for search refinement. I need to keep track of that top level query, and each of the refinements... and again, right now it looks like everything is going into the linqdatasource selecting event and I get the feeling it shouldn't be... using the selecting event enables my paging and sorting to work, so I want to use that, but again, it's turning out that I'm putting *everything* there, like all the page's logic, and I'm thinking that is not good? if I could just pass in the actually query, like an IQueryable<T>, and keep my logic separated.
View 8 Replies
Jun 14, 2010
I am writting a custom class with which I manipulate the data for my website. I was wondering if there is a way to connect to a database and retreive the column names for a given table with out sellecting any data in the table.
Currently I am using an sql select and connection string to create an SqlComman object. Then I use the command object to create a SqlDataAdapter object which I use to fill a DataSet. At the end of all that I am able to retrieve the column names but I have select data and retreived data.
View 2 Replies
Jan 15, 2010
I'm trying to construct one of my SQL query parameters by building a string inside the DataSource selecting event. This string will be grabbing information from various controls on the page (2 drop down menus and 1 calendar date selector). However, I found that stringbuilder doesn't work inside a selecting event. Is that normal or do I have another hidden problem??
Here is the error I'm getting:
System.Data.SqlClient.SqlException: Procedure 'spProcedure2' expects parameter '@sqlSelect', which was not supplied.
Here is my code inside the selecting event:
System.Text.StringBuilder selectValues = (System.Text.StringBuilder)ViewState["SelectedValues"];
selectValues.Append("EXEC spProcedure1 ");
ArrayList selectedDates = (ArrayList)ViewState["SelectedDates"];
if (!IsPostBack)
[Code]....
I'm using Visual Web Developer 2008 and SQL Server 2000.
View 8 Replies
Sep 4, 2010
I have asked similiar question before where I have two control on the page header says "username" and "gender". User can select both the control or either one and the page will execute searching based on the criteria supplied. So if username supplied
SELECT * FROM [this_table] WHERE username = @username
and if gender supplied
SELECT * FROM [this_table] WHERE gender = @gender
and if both supplied
SELECT * FROM [this_table] WHERE username = @username AND gender = @gender
I know this sounds not very complicated but in my case, I am having like more than 10 controls up there. It is something likeusername, gender, age, date of brith, title, father name, frst name, last name, blur blur blur and it's a lot then I started to lost. if i were to use if else caluse on code-behind and produce query, it would end up writing a lot of if-else and if i use stored procedure (with if-else) then my stored procedure would contains a lot of if-else statement. I am fairly new to this concept and if I'm on the wrong track, please correct me. Is there any better way to save my hair without actually going through each
if-else statement to build the query ?p.s. I'm using GridView and SqlDataSource command to display the result back on .aspx page.
View 2 Replies
Oct 4, 2010
I am trying to check whether a username exists in my database before inserting the new row & display a message to the user if it does.
On my SqlDataSource my InsertCommand looks like this:
InsertCommand="IF NOT EXISTS (SELECT * FROM Users WHERE UserName = @UserName) BEGIN INSERT [Users] ([UserName], [FirstName], [LastName], [City], [State], [Country], [CompanyName], [Active], [PasswordHash]) VALUES (@UserName, @FirstName, @LastName, @City,
@State, @Country, @CompanyName, @Active, @PasswordHash) END"
This works as expected: If the username is unique, the row is created.
If the username already exists, the row is not added.
The problem is, if the row already exists, the insert is rejected but the user is not notified.
So my question is, is there a way I can notify the user?
Maybe something like: InsertCommand = "If Not Exists (select....) Begin Insert...Else Notify User Somehow End This is a basic database, I'm not using the built-in membership provider nor will be.
View 1 Replies
Jan 21, 2011
How do I programmatically add ParameterCollection ?
[Code]....
View 2 Replies
Jul 31, 2010
i use below sqldatasource for search within a gridview and it is working fine.i just add this control and set gridview datasource id to sql datasource id .but i need the same in codebehind dynamically.i need like this becuase i need to search in three textbox but before i use one textbox. so could someone show me a example how i add a sqldatasourse in code behind and set filter parameter for search from a gridview.
[Code]....
View 7 Replies
Jun 23, 2010
Which one is better for me to store urls of my products images while i was trying to bind images with gridview. provide me some code snippet to bind images to gridview with XMLDataSource.
View 3 Replies
