DataSource Controls :: TableAdapter Null In A Query Parameter
Jan 6, 2010
I am creating a TableAdapter using corresponding wizard, with a GetDataByID() query. The select statement is like this:select * from books where ID = ?Thus books are filtered by ID. But in case a null is passed as a parameter, I want to select all records rather than none. Could you please tell me how I can do it?
View 4 Replies
Similar Messages:
Jan 19, 2010
I have a quite baffling problem. I've created a Table adapter with 3 queries. 1. GetMemberData() - Return ALL rows. 2. SearchMembersLastName(@q) - Return specified columns from rows that have a column starting with a specified letter. 3. GetMemberDataById(@id)
- Return all rows matching a specified ID.
The Problem is that SearchMembersLastName(@q) is returning ALL coloumns instead of just the ones I want. Here's the query that's in the Table Adapter:
[Code]....
The problem is that it is acting like:
[Code]....
Here's the code that's calling it:
[Code]....
I just can't figure out why this is happening, any help will be greatly appreciated.
View 4 Replies
Jun 24, 2010
I spent about 60 minutes sifting through search engine listings trying to figure this out and couldn't find an answer, so I decided to make this post for others.
Situation: Using a Stored Procedure to insert a row and return the new row ID, explained here. In my case, I used the Idenity_Scope to return the new row, like so:
[Code]....
Next, following steps as described in link above, went into the dataset XSD page, configured the table adapter to use this stored procedure. By default, it wanted my return value to be set to some value, but I set to allow Null (makes sense, since I don't want to pass the value in, I want to get it out, so it should be null to begin with).
Problem: Where I ran into an issue was in the method to call this stored procedure. The intellisense displayed the prototype it was expecting, basicly like this:
[Code]....
View 2 Replies
Dec 21, 2010
this is my html code [Code]....
i need to set null value to SqlDataSource Insert Parameter at runtime
i am used this code
[Code]....
View 5 Replies
Mar 17, 2010
I have a SQLDataSource on an ASP.Net C# page. I want the ability to add a Control Parameter based on a DropDown List that will either display records that are either NULL or Not NULL In a Column. I have the following Code Snippet:
SelectCommand="SELECT [PATID], [LastName], [FirstName], [UIN], [Rate], [Account], [Project], [Supervisor], [HireDate], [Assistantship], [Hourly], [FundingStartDate], [FundingEndDate], [TerminationDate], [Citizenship], [TitleCode], [Email], [Notes],
[SupervisorUpdateEnabled], [SupervisorTargetSemesterCode], [PATCertDate] FROM [PATAccounts] WHERE TerminationDate @Terminated ORDER BY [LastName]"
View 5 Replies
Jan 21, 2010
here is my code for selectiong some records from db table
string strSql = "select * from mtblNBD where SentTo=@SentTo and InternalStatus Is NULL order by DeadLine desc";
SqlCommand com = new SqlCommand(strSql, con);
com.Parameters.Add("@SentTo", SqlDbType.NVarChar, 50).Value = (string)Session["uname"];
here I am using parameters for SenTo field but not for NULL so it is ok... or should I use parameters for this field where value is NULL , if yes then how can I use parameter for this
View 8 Replies
Dec 18, 2010
I have SqlDataSource with a few parameters (code below). If I understand this code correctly if parameter is NULL I should receive all items from the query. It works fine with query editor. But when I try to use this query on my page - with DropDownList and Textbox controls as source of parameters - it doesn't work. I suspect that main reason of problem is value which these controls pass to the query. Instead of NULL this is an empty string. Is it possible to pass NULL value from DropDownList or TextBox to
the SqlDataSource?
[Code]....
[Code]....
View 1 Replies
Jun 3, 2010
I'm using Visual Studio 2008 Query Builder and am trying to pass a value to a parameter that uses the IN OPERATOR.Here is my sql from qb:
SELECT COURSE_TITLE, INSTR_NAME, ADMIN_UNIT
FROM vwHRIC_EC_ContractSummary
WHERE (ADMIN_UNIT IN (@ADMIN_UNIT))
The trouble I am having is that if the parameter @ADMIN_UNIT contains more than one value such as (8X, CV) that the query doesn't return any data. If I run the same query with only one value such as (8X) it works fine.I have tried different formats like (8X, CV), ('8X', 'CV'), (8X; CV) but none have worked.I ran this same query in SQL Server Management Studio and and it returns data no problem but can't get it to work in Query Builder for my aspx application.Does anyone have any experience with this problem and how did you correct it?
View 3 Replies
Mar 24, 2010
VS 2008 ASP.NET 3.5 app connecting to an MS SQL 2005 backend. The app contains a strongly typed dataset with a number of TableAdapters. I'm trying to add a query to one of the TableAdapters that deletes from table A, then related entries from table B, then related entries in the master table - table C. The query looks like this:
[Code]....
When I try to run that query to test it out, an error dialog box pops up that says "Unable to parse query text" followed by a second error dialog box that says "Must declare scalar variable @ID". Will the TableAdapters not run sequential Delete statements like this or did I do something wrong?
**Side note: A cascading Delete foriegn key relationship would be ideal, and was configured on the development database, but the DBAs messed up when replicating the database on the production server and getting them to fix something like this can be a difficult process.
View 2 Replies
Feb 5, 2010
There are several articles and blogs that are sort of about this subject but I haven't found one on point. Wondering if anyone has done this? Using VS2008 creating an ASP.NET 3.5 app with a strongly-typed dataset connecting to an MS SQL backend. In one TableAdapter, I have a custom Insert statement that inserts the record into the primary table. There are two other tables the also need records inserted into them and those records contain the record ID from the primary table. Here's an example of what I'm trying to accomplish:
[Code]....
View 3 Replies
Jan 3, 2011
I have this Insert statement working fine: [Code]....
It inserts a new record into a single table. The PK is a field named QID.what the equivalent Update code would be? I'm not sure of the syntax for the Update values (old and new) and Where clause.I'm assuming something beginning with: existingQ.Update
View 2 Replies
Jan 5, 2010
I right click on a TableAdapter, select Add Query, select using QueryBuilder, then select a field to filter upon, and add Filter as =@BookStem. Automatically the QueryBuilder adds the WHERE clause to my new query:HERE (BookStem = '@BookStem')When I press OK, I get "BookStem in expression is not part of the query". And filtering doesn't work.
View 1 Replies
Mar 20, 2010
I create Dataset(Add new item dateset(the name is myDataset)), after
that I made a simple TableAdapter(myTableAdapter) sql query, I want to know how to connect with code to this tableadapter and then with DataGrid(I don't wont to use wizard).
View 1 Replies
Mar 29, 2010
I have an sproc which selects data out of my table. The column can return integer or NULLs.
I get the 'failed to enable constraints error' when databinding. If I go to my tableadapter and select my column there is a NullValue property which has 'Throw Exception, Null, Empty'. If I try and unset the exception option it tells me only strings are allowed this. However the 'AllowDBNull' option is set to TRUE.
What is the alternative and will this be fixed in 2010?
View 1 Replies
Mar 4, 2010
I have created a function that is called when a user wishes to upload a file to the database. The problem I am having is that it won't write the files to the database anymore. This function used to work before I implemented a treeview (which connects to the database). I am struggling to see how the treeview could have cause the file upload to stop working (the error may not even be related to the implementation of the treeview).
The error message I am receiving is: 'Update' is not a member of 'CMS.SiteFilesDSTableAdapters.SiteFilesTableAdapter'.
The code for the upload function is:
<System.ComponentModel.DataObjectMethodAttribute(System.ComponentModel.DataObjectMethodType.Insert, True)> _
Public Function AddSiteFile(ByVal FileData As Byte(), ByVal FileName As String, ByVal FileDescription As
[code]....
It is throwing the error at: Dim rowsAffected As Integer = Adapter.Update(SiteFiles)
' Return true if precisely one row was inserted, otherwise false
Return rowsAffected = 1
EDIT: I managed to solve this problem by following:
http://www.asp.net/%28S%28pdfrohu0ajmwt445fanvj2r3%29%29/learn/data-access/tutorial-69-cs.aspx
Basically, I had used an Inner Join to gather all the fields, and table adapters don't seem to like them.
INSERT INTO [SiteFiles] ([FileData], [FileName], [FileDescription], [FileType], [FileCreated], [FileCreatedBy]) VALUES (@FileData, @FileName, @FileDescription, @FileType, @FileCreated, @FileCreatedBy)
View 1 Replies
Apr 9, 2010
I'm lost as to where to look next. Here is a sample of what I'm doing:
[Code].... The related tableadapter insert statement was autogenerated by VS2008:
INSERT INTO [ProductCycleCountItem] ([ProductCycleCountLocationID], [ProductID], [CountOnly], [Status]) VALUES (@ProductCycleCountLocationID, @ProductID, @CountOnly, @Status);
SELECT id, ProductCycleCountLocationID, ProductID, CountOnly, Status FROM ProductCycleCountItem WHERE (id = SCOPE_IDENTITY())
With multiple users it's as if it was returning @@IDENTITY instead of SCOPE_IDENTITY(). The table will look like this:
id Location product
1 A 5321
2 A 8273
3 B 2827
4 A 1743
The returned dataset will look like this:
id Location Product
1 A 5321
2 A 8273
3 A 1743
Is it maybe a SQL Server (2005) setting that's incorrect?
View 7 Replies
Sep 21, 2010
Going to start this thread over so that it makes more sense.Anyways, my problem is that when trying to configure my ObjectDataSource in design mode, it only gives me 2 options and never gives me the option for the one I need. The other 2 work fine, but for some reason, this 3rd one will not show up in the list.I have a webpage with pics illustrating how I have it setup and the problem ----------> https://sites.google.com/site/configuringobjectdatasource/And I have another webpage with pics illustrating steps I have taken to fix this problem but still nothing -----> https://sites.google.com/site/configodspart2/what is going on and why it will not show up in my list when I try to configure?
View 3 Replies
May 7, 2010
I need to insert two rows into a tableadapter - and then take the identity column from each row and update them into a column on each row.
My problem is that I cannot update a column on a newly inserted row. Stepping through the code seems to indicate that I have updated the column, but when I check the database - the column indicates null.
I have tried calling Update on the TableAdapter, then performing the update on the column, and then calling Update again, but the update still isn't taking.
View 1 Replies
May 16, 2010
I have a FileSystem based asp.net 2.0 app that uses Sql Server 2005 Express database.
I have only one dataset for this app with only 4 tables. After i have completed it to a part, a co-worker have added some Classes to it, which are not in same namespace of myBLL classes.
Then i tried added a new table to the dataset. It like all other tables in that dataset uses SQL Statements to access and manage data.
The problem started after i added that new table. I cannot access it from code. I can access all previous TableAdapters but not this new one.
View 3 Replies
Feb 15, 2010
I have a dataset with several tableAdapters in it. For some reason, one of them that I created doesn't show up when I try to put it into my objDataSource?
I can access and use it from codebehind (testing purposes for this post.
View 1 Replies
Apr 21, 2010
I've got an odd problem and can't figure out what's causing it. We've got 2 different DataSets in the same project and I'm seeing different generated code from the MSDataSetGenerator. Both projects are .NET Framework 4.
In one DataSet, I can open the .Designer.cs file and there's a line like:
[Code]....
This essentially exposes a Transaction property to any partial class I create so I can do with it what I want (by setting it to something).
In the other DataSet no matter what I try to do, this Transaction property never gets generated. I've right-clicked on both DataSets and chose "Run Custom Tool" to get them to regenerate (I've even tried deleting the .Designer.cs file before doing this) and they both get generated the same.
I tried to make sure all the properties of the DataSets were the same. Both are using .NET Framework 4.0 and VS2010.
The file that does not generate the Transaction was from a .NET 1.0 asp.net web site that has continually been upgraded through different .NET versions. Right now it's at 4.0 but I don't know if that would have anything to do with it.
View 2 Replies
Jul 23, 2012
I have an ASP.NET VB website in which I am using the Membership functionality to authenticate users. I am doing this through the Login control on the HTML page. I have working that it will authenticate the user and then opens a welcome screen in which I have a button they can push to open a Reports.aspx page. On that page I have a dropdown box that is being populated from a datasource connection query to my SQL Server database table. It is a hard coded query but want it to query the table off the username text value that the user provided on the login (i.e. select <something> from inventory where username = <username>). I have not behind code but only HTML at this point. Here it is ...
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Login.aspx.vb" Inherits="Login" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
[Code] .....
Here is the Reports form that has the dropdown on it:
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Report.aspx.vb" Inherits="Report" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
[Code] .....
View 1 Replies
Nov 24, 2010
I have a webpage that displays the results of a query on a table. The resulting list is sorted by town:
New York
Hyatt Regency Waldorf Astoria
Paris
Hotel du Louvre Hotel Le Meurice
I've been asked to add to this list another sublist of nearby hotels. The intended result is:
New York
Hyatt Regency Waldorf Astoria nearby hotels:
hotel 1 hotel 2
Paris
Hotel du Louvre Hotel Le Meurice nearby hotels:
hotel 3 hotel 4
I've got a TableAdapter set up in VS2010 so that I can query the table for nearby hotels with "@town" as the parameter. So at the end of each list of hotels in a town, I need to display the results of this query.
If the query turns up no records (no nearby hotels), I don't want to display anything. If it turns up 1 or more records, I want to display the list of nearby hotels.
I am trying to set up a conditional "if" statement that checks to see if any records returned but am getting an error when I try to build:
Error 3 'Maine_Innkeeper_Site_2010.App_Code.DataAccessLayer.MaineInnsDatasetTableAdapters.membersTableAdapter.GetNearbyProperties(string)' is a 'method', which is not valid in the given context E:Ed dataclientsMaine InnkeepersMIA website 2010Maine Innkeeper Site 2010lodging-search-output.aspx.cs 49 49 Maine Innkeeper Site 2010 [Code]....
View 1 Replies
Mar 25, 2011
I fill a GridView from a ObjectDataSource that points to a Typed DataSet.
I need to read a couple of row columns from the object data source that IS NOT part of the Gridview.
So far, I have found out that ObjectDataSource.ObjectDataSource_Selected is the right event to do this.
Examples on the internet refers to e.OutputParameters, but that appears to be empy even though rows are returned.
e.ReturnValue seem to contain a type related to the row type, but I cannot interpret this either.
View 1 Replies
Dec 15, 2010
I'm creating a webpage with serveral web controls to set search parameters for querying an SQL table. My plan is to use a TableAdapter to hold the query. If the user decides not to use one, several, or any of the web controls to filter their search, I want the SELECT to execute without complaining that it doesn't have parameter values. Should my SQL query look like
[Code]....
View 2 Replies