I have vs2008 . I wat sql server and management tools .
I uninstalled all previous sql 2005 stuff and downloaded SQLEXPRWT_x86_ENU.exe for sql server express 2008.
I followed the instructions from below.
[URL]
I got an error on install when it claims I have a previous ver of vs2008 and need to install sp1 which I have. After installing sp1 I still get same error.
I used that Microsoft Windows installer and installed visual web developer 2008 express and sql server 2008 so I thought. visual web developer works find.
When I look at sql server 2008 all I see is import export data link.
and the configuration tools.
In the configuration tools I see the following:
sql server configuration manager.
sql server error and usage reporting
sql server installation center.
So I figure sql server 2008 was not fully installed.d
I open the installation center and went to system configuration checker but I get a dialog
box that say browse for sql server 2008 installation media.
install Visual Studio 2010 (with ASP.net framework 4.0) and when I try to install SQL Server Express 2008 I get an error message telling me that .NET framework 3.5 SP1 is required.I know in the installation of VS 2010 SQL Server Express is installed. However I need to have the management studio install. I have tried installing both the full version of SQL Server Express 2008 and the front end management studio for SQL Server 2008nly.
View 2 Repliesi have installed sql server express using windows authentication mode,but i have a doubt if we want to acces the data from front end we type like uid="",pwd="",servername="" but when using windows auth what credentials we have to give or there is no need of any details?
View 3 Replies my system i am having sql server 2005 standard edition.now i installed sql server 2008 r2 express edition and i am getting error like.."the service did not respond to the start or contorl request in a timely fashion"...
is it possible to install sql server 2008 r2 express edition in a system where sql server 2005 standard edition is already installed?
I follow the instruction of installing a new feature with the application SQLManagementStudio_x86_ENU.exe and I get to a fail telling me that VS 2008 needs to be upgraded to SP1.
This I have done several times with the final message saying successfully installed yet 'About' shows only
Microsoft Visual Studio 2008
is there any difference between sql express and sql client. Actually I have been told to install a sql client using which i will connect to the sql server installed remotely. Also I have sql express edition 2008 installed on my machine. So is it the same. Will I be able to connect to the sql server using the sql server express edition.?
View 2 RepliesI have 15 .dtsx files that were edited in SQL Server 2008 BUi and I need to deploy them all to dev server that has SQL Server 2008?
How do I go about deploying all 15 at the same time?
I sucessfully installed SQL Server Express 2010 on my windows server. I then tried to install the SQL Server 2008 management studio via Web Platform Installer but it failed (it did however sucessfully install powershell).
[Code]....
I have been attempting to install sql server express 2008 but have come across problems. I downloaded it via web platform installer and it ran the install process, and I thought this would be it, but then upon creating some wizard log in controls on a website they won't work because its not installed. Then i relised I can't actually run the program, only some of its features. I then found the Installation centre and thought, oh I haven't actually installed it yet, and when I select new SQL server stand-alone installation or add features, instead of going through the process like it states on tutorials for installs, it asks me to browse for installation media, which I do not have because I downloaded the express edition.
View 3 RepliesAfter reimaging my hard drive, I reinstalled SQL Server Express 2008, this time using the Windows Platform Installer for the first time. Tried running websites within VS2008 and VS2010 and can't connect to database. Tried to turn on using Sql Server Config Manager. Won't turn on. Also tried to connect via Sql Server Management Studio 2008, but got this error:
A network-related or instance specific error occured....the server was not found or was not accessable.
When I use Login control with integerated security and user instance to connect Sql Server 2008 Express. When I browser the web page in VS2010 in Solution Explorer's right click context menu "Browser in Explorer", it works correctly, but in IIS 7 get an error as follow:
User does not have permission to perform this action.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: User does not have permission to perform this action.
I use IIS 7, an administrator user credential, application pool's identity is Newwork Service.
where can i download profiler from? i can't find it on google.
View 2 Repliesis it possible to use databases orignally made in sql express 2005, in SQL server 2008? and is there any method on how to do this?
View 2 RepliesHopefully this is a simple question. I am filling in for someone out.
We currently are using 2008 Express. Do I need to remove this prior to installing 2008 Developer, or can I simply just install over.
I have instance of MS SQL Server 2005 on my computer. Is there any way to install SSMSE (Management Studio) 2008 to work with instance of MS SQL Server 2005? Operational System of my computer: Windows XP with 32 bit, processor 1.67 GHz.
View 2 RepliesAfter I installed Visual Studio 2008 Standard edition, then I upgrade "SQL Server Express 2005" to "SQL Server Express 2008 SP2". Process upgrading SQL Server Express 2008 was going succesfully (none of the process was fail).
But when I create a New Website I could not add a new item "SQL Server Database" into my website file. Because Visual Studio always rejected any new "SQL Server Database" by giving message below (underline):
This server version is not supported. Only servers up to Microsoft SQL Server 2005 are supported.
how to install microsoft sqlserver 2005 or 2008 on window 7 with x64 bit.It works perfectly on vista but on getting a new system which comes with window 7 and x64bit i was unable to load the software onit except my visual studio 2008.
View 1 RepliesI am developing a C# VS 2008 / SQL Server 2005 Express website application. I have tried some of the fixes for this problem but my call stack differs from others. And these fixes did not fix my problem. What steps can I take to troubleshoot this?
System.Data.SqlClient.SqlException was caught
Message="Conversion failed when converting datetime from character string."
Source=".Net SqlClient Data Provider"
ErrorCode=-2146232060
LineNumber=10
Number=241
Procedure="AppendDataCT"
Server="\\.\pipe\772EF469-84F1-43\tsql\query"
State=1
StackTrace:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at ADONET_namespace.ADONET_methods.AppendDataCT(DataTable dt, Dictionary`2 dic) in c:Documents and SettingsAdminMy DocumentsVisual Studio 2008WebSitesJerryApp_CodeADONET methods.cs:line 102
And here is the related code. When I debugged this code, "dic" only looped through the 3 column names, but did not look into row values which are stored in "dt", the Data Table.
public static string AppendDataCT(DataTable dt, Dictionary<string, string> dic)
{
if (dic.Count != 3)
throw new ArgumentOutOfRangeException("dic can only have 3 parameters");
string connString = ConfigurationManager.ConnectionStrings["AW3_string"].ConnectionString;
string errorMsg;
try
{
using (SqlConnection conn2 = new SqlConnection(connString))
{
using (SqlCommand cmd = conn2.CreateCommand())
{
cmd.CommandText = "dbo.AppendDataCT";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Connection = conn2;
foreach (string s in dic.Keys)
{
SqlParameter p = cmd.Parameters.AddWithValue(s, dic[s]);
p.SqlDbType = SqlDbType.VarChar;
}
conn2.Open();
cmd.ExecuteNonQuery();
conn2.Close();
errorMsg = "The Person.ContactType table was successfully updated!";
}
}
}
I have SQL server management studio express install on one machine.
I am able to connect to that machine or able to ping that machine from my computer.
I have code which return me the SQL server instances on same network. Using that I am able to get that SQL server instance. I have configured SQL express to access remote connection. i.e.
Configured SQL express to accept named / TCP IP instance connection. Started Browser service.
My machine settings My machine has been configured to set dynamic IP address using DHCP protocol
When I am trying to connect to above mentioned SQL server I am getting error that "Failed to connect SERVER NAME\SQLEXPRESS".
But if I configured my machine with manual IP address and default gateway I am able to connect to same SQL server.
I got the solution to connect to that server but I don't know why I am facing such problem. And also let me know that is the solution I am using is correct or not?
quick question on SQL Studio Mgt Expres (SSMES) 2208. I have been googling around but could not find a clear cut answer to this simple issue:Is it possible to connect to a remote db using SSMES 2008? The options at login appear to be restricted to Database Engine and SQL Server Compact Edition only. On the SSME 2005 version, there was an option to connect to remote db's usging server name & pwd. Has this feature been disabled in the 2008 Express version?
View 2 RepliesI have written a website in ASP.NET with a back-end database using SQL Express 2008. My database is created and put in the App_Data folder. It is ok when it runs on my local machine. However, when I upload to the web server, I got the error: An attempt to attach an auto-named database for file C:Documents and ettingsDesktopProject2_ISAM5337App_DataEvent.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. By the way, I notice a same probelm : When I move my project to a location which is different from specific path for my database, I got the same error message .
View 1 RepliesI currently doing a website that require to have a report for higher management, but i cant seem to have the crystal report tool in my MS Visual Web Developer.
View 2 RepliesThis may seem simple but for some reason I am having a problem.
I am trying to install SQL Server Express 2005 on Windows XP Service Pack 2 which has not been online for a while.
Everytime I've tried it has told me that it doesn't meet the minimum requirements. I am not sure if its because I am sick and dazed out.
Can SQL Server 2010 Express Edition install on Windows 7 Home Basic Edition?
Any official links of microsoft website which states that are great.