Databases :: Error [HY000] [Informix .NET Provider][Informix]Database Locale Information Mismatch

Aug 19, 2010

there is an upgrade to my infimacs server and my web application encounter this error after the infimacs is upgraded.

Below is the information on the server before/after the upgrade.

Before After

--------- -----------

Solaris 8 Solaris 10

IDS 9.40 IDS 11.50

The web server where the web application hosted is running IBM Informix Connect 2.81. There is no such error before the upgrade is done.

As a developer, i have IBM Informix Client-SDK 2.90 installed on my local pc and debug the page where the read is needed from infimacs but no such error found.

The error come out only when it is hosted on the web server where IBM Informix Connect 2.81 is installed.

I have gone through many articles and it suggest me to set the environement variable in the server : DB_LOCALE=en_us.819.

I haven't try this solution but i think that this might not be the best solution.

Is it possible to to to have this setting in the web application ?Does anyone has idea on this?Is it true that there is no other solution than setting the environemetn variable DB_LOCALE?

Below is my connection string

"Host=192.168.100.xx;Server=infimac;Service=1527;Protocol=onsoctcp;Timeout=120;Database=abc;uid=userid;pwd=password"

View 1 Replies


Similar Messages:

Databases :: Unable To Do A Like Search From Application On Informix?

May 21, 2010

i want to search for data in informix using a like('%Name1%') from my .NET application. The query that i have written is something like this:

select * from tableName where columnName Like CONCAT('%',CONCAT('Name1','%')) ......
this query when run from the front end does not yeild the desired result set ......however when i execute it from the db level i get the correct result .... also an intersting thin that i noted is ...if i do a LIKE('%' || 'Name1' || '%') from the front end i get a syntax error ...however this works just fine when i execute the query from the db...... ive spent over 10 hrs trying to figure this out ......but have not found a solution for it on my own ...... also, the following works perfectly :select * from tableName where columnName LIKE CONCAT('%','Name1') .....from the application...
likewise select * from table name where columnName like CONCAT(Name1,'%') works ...........* the vale fields need to be replaced with a '?' in the front end ...informix automatically replaces it when executing the command statement....so the commantext for all informix commands look something like this :
select ColumnName from tableName where columnName1 LIKE CONCAT('%',CONCAT(?,'%'))
parameter is 'Name1'

View 2 Replies

Security :: Member / Role / Profile Database Schema Port To IBM Informix (IDS 11.x) Database?

Jun 14, 2010

I was just wondering if anyone has ever had to port the schema across? Are there any experts that could pitch their opinions on the achievability of this (mad) idea? I'm using the IBM Migration Toolkit and as expected its throwing a bunch of translation errors some of which were relatively easy to solve (vendor specific function calls for example) and some will take quite a while to pin down and work round.... however this is not my main concern.

If completed I expect I am going to have to basically rework all the System.Web.Profile/Roles/Membership namespace classes etc to work round the SQL limitations of informix (i.e. IDS11.x SQL server doesnt have a DEFAULT (newguid()) so that would have to be put into the calling method) (and any MVP comments really as I can slap my boss round with the weight after he ludicrously agreed to this project for a client without doing any research...)

View 1 Replies

Vb.net - Cannot Connect To Informix From Application

Jul 13, 2010

I've installed the trial version of IBM Informix Dynamic Server 11.50 on my development laptop, for use with an ASP.NET 2.0 app I'm writing. I have created a couple databases and filled them with sample data but I cannot connect. This is the relevant section of code:

Dim facStr As String = System.Configuration.ConfigurationManager.ConnectionStrings("fact").ConnectionString
conn.ConnectionString = facStr
Try
conn.Open()
Catch ex As Exception

The exception is:

[Informix .NET provider][Informix]Server ol_srv_custom is not listed as a dbserver name in sqlhosts.

The full path to the sqlhosts file is:

C:Archivos de programaIBMInformixClient-SDKetcsqlhosts

Informix's environment variables:

INFORMIXSQLHOSTS=C:Archivos de programaIBMInformixClient-SDKetcsqlhosts

Contents of sqlhosts file:

ol_srv_custom olsoctcp *nb-desarrollo svc_custom

Connect string:

Host=*nb-desarrollo; Service=svc_custom; Server=ol_srv_custom; Database=fact; User Id=informix; password=****

View 4 Replies

Informix Odbc Connection Slow To Open

Apr 28, 2010

I have an application that takes a long time to open odbc connections (like 20 sec) also takes forever using arcmap and arcsde but when I try the connection on the odbc data source administrator, it tests it really fast. Does anyone have any idea of what my be causing this? btw the application works fine in another computer with another database

View 2 Replies

Databases :: User Validation In Xlsx File Error "Data Type Mismatch In Criteria Expression".?

Dec 9, 2010

I am validating user from Login.xlsx file. It was working fine by validating email and password from that file. For testing i got new file same contents of file but added some more user names. So after that when i validating the user i am getting the following error "Data type mismatch in criteria expression".

But when i replaced the new to old one it is working fine. The contens of both files are the same. So why this kind of error happened.

View 1 Replies

Databases :: Type Mismatch In Criteria Expression?

Jan 9, 2011

I am importing data from an Excel worksheet. The columns are labelled aa, ab, ac .... in row1 and the rows are labelled with integers in col aa. Although I can import the entire worksheet (so long as it isn't too big), when I add a WHERE clause to import only a single row I get a type mismatch which I have not been able to isolate. How can I make progress.

Protected Function SetsConnection(ByVal n_cust As Integer) As OleDbCommand
'
' Create the connection string for the EXCEL file containing the filename and Provider settings.
'
Dim rope As String

[Code]....

View 4 Replies

C# - ERROR [HY000] [MySQL][ODBC 3.51 Driver][mysqld-5.5.9]Column 'UserID' In Field List

Apr 2, 2011

I get an error unsure how to fix it:ERROR [HY000] [MySQL][ODBC 3.51 Driver][mysqld-5.5.9]Column 'UserID' in field list is ambiguous

pblic partial class Search : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
private void PopulateWallPosts(string search)
using (OdbcConnection cn = new OdbcConnection("Driver={MySQL ODBC 3.51 Driver}; Server=localhost; Database=gymwebsite2; User=root; Password=commando;"))
[code]...

View 3 Replies

Databases :: Error "Unable To Initialize Provider. Missing Or Incorrect Schema" When Try To Log In

Mar 28, 2011

I am trying to implement a super simple MySQL membership. All I want my Membership class to do is ValidateUser. Here is my method:

[Code]....

When I try loggin in, I get the following error: I have added the MySQL.Web and MySQL.Data references. I also have auto generate schema set true. What am I doing wrong ? Here is my Users table (created by myself), where the user login details are saved:

View 1 Replies

Access :: Keyword Not Supported: 'provider'. Error When Connecting To Database?

Apr 4, 2010

I wish to connect to an access database within visual web developer. I created the connection string:

<connectionStrings>
<add
name="ConnectString"
connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=C:foldersfilename.mdb"
providerName="System.Data.OleDb"/>
</connectionStrings>

And I refer to the connection like so:

<asp:sqlDataSource
ID="SqlDataSource3"
runat="server"
ConnectionString=
"<%$ ConnectionStrings:ConnectString %>"
ProviderName="<%$ ConnectionStrings:ConnectString.ProviderName %>"
SelectCommand="

but I recieve the error

Keyword not supported: 'provider'.

Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.ArgumentException: Keyword not supported: 'provider'

what am I supposed to do to make this connection work! I have always done it in dreamweaver with no problems, but I have to use Visual Web Developer for this project.

View 3 Replies

Crystal Reports :: Getting An Error - Failed To Load Database Information?

Apr 14, 2010

why i am getting an error when i try to run my reports from a windows server 2003 service pack 2 X64


the reportviewer displays but the following error shows up

Failed to load Database information

Error in file (temporary file that the viewer creates.

View 2 Replies

Access :: Error; Data Type Mismatch In Criteria Expression?

Jan 12, 2011

I have used the repeater function in an aspx page to create a discussion/fourm style page where user can posts comments, but when I try and write a comment I get this error; Data type mismatch in criteria expression. The user gets to the discussion page from a link in a gridview so that it displays all the posts on the specific film, and the correct posts come up, its just when a user wants to post something themsevles I get the error.This is the code in the discussion.aspx.vb page

Protected
Sub Page_Load(ByVal sender
As

[code]...

View 5 Replies

Databases :: Error - Database Open For Read-only Access

Jan 20, 2011

I've created a connection to a read only Oracle database but when trying to execute a very simple SELECT statement it generates the following error:

"database open for read-only access"

I've tried a datareader and dataadapter so its looking like a specific issue or protocol with the database that I am unaware of.

View 1 Replies

Databases :: Unable To Insert Into Oracle Database - ORA-00911 Error

Jul 26, 2010

I am trying to insert values into oracle database using visual studio 2010 express edition. find the below code I used:

[Code]....

View 2 Replies

Databases :: Excel Parsing Error - The Microsoft Jet Database Engine Could Not Find The Object

Nov 17, 2010

I'm looking for a way to parse excel into Asp.Net, the problem I'm experiencing same as in[ URL]

I've searched all web, but no1 seems to have an answer

here's the error

The Microsoft Jet database engine could not find the object 'Cities'. Make sure the object exists and that you spell its name and the path name correctly.

the code is the exact same as in [URL]

View 2 Replies

Databases :: How To Use Oracle Membership Provider For .Net

Apr 13, 2010

to Find website or write to me How to use Oracle Membership provider for ASP.Net and what changes should i do to Web.config and machine.config?

View 1 Replies

Databases :: Can Not Find Data Provider

Mar 21, 2011

am using VS 2010 with Oracle database 10g. I get the following error only when i deploy my application to the server:Unable to find the requested .Net Framework Data Provider. It may not be installed.Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code

View 3 Replies

Databases :: MSDAORA Provider On 64 Bit Environment

Jul 27, 2010

I have Asp.net application which I have created on the vista 32 using vs 2005.Which uses MSDAORA provider to connect to oracle,which works fine.ut when we are deploying on windows 2003 server 64bit it is giving the below error:Excetion: System.InvalidOperationException: The 'MSDAORA.1' provider is not registered on the local machine.I have search on the google for the solution and found that:switch the appication to 32 bit and use a 32 bit Oracle client'vider instead (Ie, Oracle's provider - ORAOLEDB.ORACLE)ORAOLEDB.ORACLE and it will work.

View 4 Replies

Databases :: Provider Doesn't Appear In The List?

Jan 14, 2010

I have MySQL database, and I just installed the MySql-Connector-Net. But MySQL Provider doesn't appear in the list of providers e.g. in the Server Explorer.

View 8 Replies

Storing Information On Databases?

Nov 12, 2010

I have created a simply website in which users can log on and complete forms. I wish for this data to be saved for when the user next logs on, but havent got a clue how to approach this.

I'g guessing that the data somehow needs to be saved onto a database that can be accessed by all users when they log in?

View 5 Replies

Databases :: How To Read Excel Sheet From 3rd Row Using Oledb Provider

Oct 26, 2010

I have a excel sheet and I want to make the 2nd row my header column and read the data from the 3rd row, considering 2nd row is the Column name.

View 1 Replies

Databases :: The Provider Is Not Compatible With The Version Of Oracle Client?

Sep 7, 2010

I am having the error stated above. The stack trace is as follows:

[Code]....

Some info's:Server: Windows Server 2008 R2

.NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1

Oracle.DataAccess, Version=1.102.3.0bit

.NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1

Oracle.DataAccess, Version=1.102.3.0


My Code: OracleConnection cn;
String con1 = ConfigurationManager.ConnectionStrings["myConnectionString"].ToString();
cn = new OracleConnection(); [code]....

I have checked all forums and posts regarding this error. They mention that there are 2 versions of Oracle.DataAccess.Client on the server, I only have 1 version. This runs on VS2010, but when I publish the website the error above shows up. I checked my Oracle connection from the installer and connection test passed. I tried uninstalling Oracle and reinstall, but still the same. The query above I tried changing to 'select region_code, reg_rom, ...', still the same error..

View 17 Replies

Databases :: Sql .net Connector Membership Provider Defaulting MinRequiredNonAlphanumericCharacters?

Mar 10, 2011

I just downloaded and installed the most recent MySQL .net connector, 6.3.6 and it connects to the DB just fine. My problem is with the web.config settings I have set for it. It seems that theMinRequiredNonAlphanumericCharacters property is hard coded to '1'.I've changed this to 0, 5, or any other number. I even setup a web page to just display the properties of the provider. If I change the values in the web.config, the values update. It seems that MinRequiredNonAlphanumericCharacters won't change.

[Code]....

Again, the DB connection works just fine, reason I did not post the connection string. The min password length at 44 was just for testing.

[Code]....

Of the three I only tested, only MinRequiredNonAlphanumericCharacters stays at '1' no matter what I change it to in the web.config. I even changed it to 'abcd' and received no .NET runtime errors. Me thinks it is hard coded some where or I'm not using the right property name in the web.config. I copied the web.config value straight from the example in the documentation that came with the MySQL .net connector.

View 2 Replies

Visual Studio :: Database Upgrade Get An Error "no Template Information Found"?

Apr 20, 2010

I recently upgraded my database to sql server 2008 and my visual studio to sp1. I did this after i uninstalled the original versions. when i run old projects made in the previos configuration i had (express and viaual studio professional) i cannot connect to database, even though i have added the connections in visual studio and made sure sql server is running. Also When i go to create a new project in visual studio i cannot see the standard project types anymore, i get an error "no template information found".

View 4 Replies

SQL Reporting :: Connecting To Database - Error "Could Not Retrieve Schema Information For Table Or View"

Jun 3, 2010

Well it's finally time to stop ignoring my unit's need for reports. I keep coming to dead ends. I gave up the crystal reports idea, and ssrs seems a little easier. Now the problem is that I'm creating a report locally on my laptop, then will change the connection string, upload it to my server and have it run against an identical database on the server.

I'm using SQL Server Express locally, and when I try to create a dataset (using the wizard), I can see the tables, but when I try to add one, I get an error message "Could not retrieve schema information for table or view". I looked up this error and there isn't much useful info on it. I guess it some bug when trying to use SS Express? Is there a work around for this? Can I create the report programmatically? Should I use a different kind of reporting service?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved