I'm trying to make web form with two placeholders. Firs holder contains user control witch has list of buttons, each button opens different user control to second placeholder.
I get it to show user control in second placeholder but i can't get dynamically created user controls to fire events.
So how i can dynamically create working user control with button click?
Here is how i create those controls:
[Code]....
"field" is hidden field containing filename of user control to be created.
I have user control that inherits a base control class and these user controls are loaded using the LoadControl method, I can't seem to figure out how to raise events from user controls to the page that are dynamically loaded this way. Here is the delegate and event in the base user control class.
public delegate void SomeChangeEventHandler(object sender , SomeChangeEventArgs e); public event SomeChangeEventHandler SomeChangeEvent; public virtual void OnSomeChanged(SomeChangeEventArgs e) { if (SomeChangeEvent != null) { SomeChangeEvent(this, e); } }
I am trying figure out how I handle events in a dynamically added user control. Basically I can add user controls dynamically to my form (I am then storing them in an ArrayList in a Session variable that I use to reload them on my Page_Load). Each control has a button on it. However, whenever I click the button, the event never fires (code is never reached). I assume it has something to do with the control being dynamic, and when I click a button, it goes out of scope, and when I reload it something is lose in the event handling.
Here's my code for adding a user control:
Code: Protected Sub Page_Load(sender As Object, e As System.EventArgs) Handles Me.Load Dim alContact As New ArrayList If Not IsPostBack Then ' Dummy controls for testing Dim oContact As New ASP.ContactControl
For a "dashboard" module I need to dynamically load user controls based on criteria as the user enters the page (role, etc). The problem is that the events are not being fired at all from the controls
As I understand it I need to load the controls in the OnPreInit method of the dashboard page, however I cannot get a reference to the Placeholder control at this point of initialization (i.e. I get a NullReferenceException); trying to load the Placeholder dynamically via Page.FindControl gives me, ironically, a StackOverflowException.
I've tried loading the controls in PreRender and OnInit as well but the events in the controls are not wired up properly and will not fire.
In an ASP.NET page I have added two user control with a dropdownlist each one. The selection of a dropdownlist should be changed the query to the second user control.What is the most efficient way to pass the selected value of dropdownlist to the second?I initially thought of creating a public event (public string OnClientSelectedIndexChanged) while the first user control and outsource through a public string SelectedValue the selected value of the second user control:
I'm creating a web user control in asp.net using C# in which i can select a date from a calendar and display it in a textbox. when i select a date from the calender it has to be displayed in the textbox. now i need to set my own properties by which i can select datetime patterns in cs codefile. for example
usercontrol1.dd-mm-yyyy.
this is one example. now i want all the datetime patterns of "en-us". when i use that usercontrol in another page i want to set any of the properties(datetime patterns) to that control.
public partial class DateControl : System.Web.UI.UserControl { string dateformat; public string Dateformat {
[Code].....
i said that i want set properties for my user control and create events for that..
I have got a query regarding the usage of delegate in usercontrols. The scenario is I have got a user control which acts as a footer
on all the pages, It has the following place holders : Email, Print, Logout.
What I want to acheive here is when the customer logged in he/she has certain feauture's on the website for instance his/her personal diary,
dieting charts, birthday calender etc. I have figured out a way to create pdf's of each summary , what I am looking for is how to use the usercontrol
for instance when the customer clicks on the email place holder on certain page which is in the footer usercontrol, the following place holder should send
an email with the pdf file of that particular page attached to the customer. I came to know that delegate is the best way of doing it, but I cant find any specific tutorial on it.
've recently set up an ASP.net site (not using MVC.net) to use URL Routing (more on the code below) - when using user controls on the site (i.e I've created a "menu" user control to hold menu information) the page_load event for that control will fire twice when URLs have more than one variable passed over.
i.e.
pageName/VAR1 : will only fire the page_load event once.
while
pageName/VAR1/VAR2 : will fire the page_load event twice.
*Multiple extra VARs added on the end will still only fire the page_load event twice*.
Below are the code snippits from the files, the first is the MapPageRoute, located in the Global.asax :
[code]....
Note, that when I'm just hitting the page and it uses the default values for items, the reloads do not happen.
I have a user control in an asp.net web application. The control outputs an html list that is customized based on the currently logged in user. The list items are generated from a database look up and the user control is formatted to appear as a drop down list in the page.
The ID and class properties are all necessary for formatting and other scripting. The control is meant to be used as a selector and the rest of the page should react to which item the user selects.
What I am trying to do is add click events to the list items. When the user clicks on one of the items in the list, I want to capture which item the user selects in the list (does this require a postback?) and do something with it in the code behind (< this is key).
I am more of a middle tier and db tier developer and UI development is not my strength so please consider me a newbie in that regard. I am not sure how to proceed or what to inject into the output string to enable this.
I have an aspx webpage in which an user control is added dynamically as follows:
UserControl testUsrControl = LoadControl("TestUsrControl") as UserControl; testUsrControl.ID ="test";
Then I tried adding an event handler of user control inside aspx like below:
testUsrControl.Drpdatafield_SelectIndexChanged += new EventHandler(this.Drpdatafield_SelectIndexChanged);
But this line is giving error at **testUsrControl.Drpdatafield_SelectIndexChanged **. The error is "Drpdatafield_SelectIndexChanged" doesn't exist in UserControl.How can get the testUsrControl's events inside aspx page dynamically.
I have a website that sales associates access to view account information with clients. S.A's can only view information for accounts that they are tied to. Some clients have more than one account, S.A's can be tied to more than one account, but not all accounts of one client need to be tied to one S.A.
On the account info pages, I have account numbers (dynamically displayed labels) displayed of other accounts that the account client is associated with, which the S.A's can see. I'm modding this so that if the S.A has viewing permissions of any of the other accounts on that list of accounts, that instead of a label being displayed, a button directing them to that account page will display instead. In order for this to work, I have to attach a security function to the button, otherwise the page will blow out on the S.A's.
So I'm running a piece that is displaying a button instead of a label, which is working fine. My problem is when I try to attach the security event to the dynamically displayed buttons. It seems that the page just posts back and doesn't execute my code at all.
On my Page_Load, I'm running this after the buttons and labels are displayed:
For x = 0 to tblAccountList.Rows.Count - 1 'use a try to target the button, use catch to handle if it's instead a label, only one cell per row. Try Dim accountLink as Button = tblAccountList.Rows(x).Controls(0) Addhandler accountLink.Click, AddressOf Me.PermissionViewCheck Catch ex as InvalidCastException Continue For End Try Next
I don't have any code checking for postbacks or anything like that, but the "PermissionViewCheck" event never fires and just reposts the page.
I have a user control called ucTriStateButton. It raises an event when it is clicked, called TriStateButtonClicked. If I put this user control on a page, it works fine. Here is the declaration on the .aspx page:
[Code]....
When the button is clicked the method tsbTest_TriStateButtonClicked executes correctly.
The problem is when I put the user control in template field of a GridView.
[Code]....
There is no way to hook the event handler to the control in Page_Load because I cannot get a reference to tsbMorning. So I did it in the RowDataBound event handler of the GridView, where I also do a bunch of other row-specific stuff. Although this builds and runs, the event is never actually subscribed to and so never gets fired.
So the question is - how can I handle an event from many instances of the same user control within a GridView? I am calling the same bit of code regardless of which user control is actually clicked. I only need to know that one was clicked.
I want to create a user control that will again contain a user control that will be dynamically generated and can be repeated N times with respect to data present in data table.
have a page that use JQuery to get markup of user control from a web services. it is successfully giving me what i want the markup etc.Jquery Code:
[Code]....
------------------
You can see that user control have a button that have a click event handler. i want this button to trigger on click. but when i click on this button i found server error "The state information is invalid for this page and might be corrupted."i can imagine what is going on viewstate is not valid for form for obivious reason......how can i fix this problem or update viewstate.
I have a page with a number of user controls, In one of my user controls I have a button event. I turn on output cache for the user control that has the button and vary by control using the ID property of a hidden field control in the user control. whenever I turn on the output cache my button event doesn't fire.
I have a custom control, that has takes some information from user and submit to the database. it is working fine in normal aspx pages. but when i display that custom user control in jQuery modal popup. The events does not fire or lets say the data is not submitted to the database.
I have a user control with a textbox and a gridview. When data is entered into textbox it has to get data from the database and populate in the gridview. The grid view has add,edit and delete events.The user control is loaded dynamically multiple times on to the page.My issue is when i have 2 or more user controls and if textbox of usercontrol1 is changed, it reloads both the controls and fires the postback event of textbox twice each for the user control, where as it has to execute only once. due to which the data modifications in the grid are lost as it pulls back the data once again from the database.
I have one label and table control in my webusercontrol.In my web form i want to add my webusercontrol dynamically and also i want to update value of label and table in my webusercontrol. I have tried using LoadControl method. The problem I am facing is that in my webform I am able to see webusercontrol but I am not able to update values.
I have this GridView that have it's DataSource as a list of previously selected products. For every item on it, I need to Eval it's ID and load a specifc form that the user must fill, then after that i've got to update the GridView.
I have made those specific forms as User Controls, is this the best approach for this scenario?
If yes, how can I dynamically load them, in a way that I can make queries/postbacks then update back my gridview?
