The question has probably been raised many times, but I could not find an answer so far.The error is: ropdownlist has SelectedValue which is invalid because it does not exist in the list of items.However, I have debugged the values and the list has the correct list of values which includes the SelectedValue.
View 5 RepliesI have a dropdownlist in DetailsView to which items are added programmatically during DataBound event. It is working fine in InsertItemTemplate, but in EditItemTemplate i am getting this error "'branchDDL' has a SelectedValue which is invalid because it does not exist in the list of items. Parameter name: value".
. Following is the code:
<asp:TemplateField
HeaderText="Course"
SortExpression="branchID">[code]....
We use gridview for showing a data from table.It show fine in certain case like in table field dispostion is data and test but in table we put the string Ineligible Member/Member No Longer Enrolled - Spoke to Target and Wrong Number After Skip Tracing then it gives error. 'DropDownList1' has a SelectedValue which is invalid because it does not exist in the list of items.
The following is snippest my code ,tell me where i am wrong.
[Code]....
I've got a gridview which displays records from a table in SQL Server. Next I've got a details view which displays the details from the selected record. This works fine.
When the user selects a record, which then gets displayed in the details view, I'd like to make it possible for the user to edit the record. I've done searchs for this online, and found lots of responses, but none quite displaying an answer to the question I've got. I'm sure it is a simple thing I've done wrong, but at this point I don't know what it is I've done wrong. I've getting this error,"'DropDownList1' has a SelectedValue which is invalid because it does not exist in the list of items.Parameter name: value".
I've got a SqlDataSource to display the data in the details view. And then I specified another SqlDataSource to use for the dropdownlist control in the details view. I converted the field, in the details view, to a template field and have been replacing it. Here's the SqlDataSource controls definitions:
[Code]....
and here's the info for the details view:
[Code]....
In my asp.net page I have a formview. In the formview's InsertItemTemplate I declare a dropdown list as below:
<td>
<asp:DropDownList ID="DropDownList6" runat="server" text='<%# Bind("District") %>'
DataSourceID="SqlDataSource6" DataTextField="District"
DataValueField="District">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource6" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [District] FROM [tblDistricts]"></asp:SqlDataSource>
</td>
and this works perfectly fine.
In the EditItemtemplate I declare a similar dropdownlist as below to edit district values:
<td>
<asp:DropDownList ID="DropDownList6" runat="server" selectedvalue='<%# Bind("District") %>'
DataSourceID="SqlDataSource6" DataTextField="District"
DataValueField="District">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource6" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [District] FROM [tblDistricts]"></asp:SqlDataSource>
</td>
But whenever I try to edit the data I get the error:
'DropDownList6' has a SelectedValue which is invalid because it does not exist in the list of items. Parameter name: value And the values I am trying to edit were entered into the table by the dropdownlist declared in the insertitemtemplate dropdownlist6 listed above. And no values were deleted from the table.
i have a detailstview and sql datasource I am retrieveing the data so far no problems but afteradding a dropdownlist in edit mode and clicking edit button I get this error"
'DropDownList1' has a SelectedValue which is invalid because it does not exist in the list of items.
Parameter name: value.[Code]....
Before this, everything is fine when running the project After I've put "SelectedValue" below to the field,
<asp:TemplateField HeaderText="Interest">
<ItemTemplate>
<asp:DropDownList ID="ddl" OnSelectedIndexChanged="ddl_IndexChanged" SelectedValue='<%# bind("int_id") %>' AutoPostBack="true" runat="server">
</asp:DropDownList>
</ItemTemplate>
[CODE]
How to solver this error? I am getting error for "DropDown"
Error: 'DStation' has a SelectedValue which is invalid because it does not exist in the list of items.Parameter name: value on line: DStation.DataBind();
My .cs code is below
string CommandText = ("select distinct StationName from stations where DeletionDate is null");
DStation.DataSource = DataManager.DatabaseManager.GetOrCreateConnection
(DataManager.DatabaseManager.ConnectionType.MySQL).GetData(CommandText);
DStation.DataTextField = "StationName";
[Code] .....
I got this error when select a row from a grid view to update
'ddl_ctegOf_Product_update' has a SelectedValue which is invalid because it does not exist in the list of items.Parameter name: value
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentOutOfRangeException: 'ddl_ctegOf_Product_update' has a SelectedValue which is invalid because it does not exist in the list of items.Parameter name: value
Source Error:
Line 265: txt_prodID_update.Text = gridTo_updateFrom.SelectedRow.Cells[1].Text;
Line 266: txt_prod_name_update.Text = gridTo_updateFrom.SelectedRow.Cells[2].Text;
Line 267: ddl_ctegOf_Product_update.SelectedValue = gridTo_updateFrom.SelectedRow.Cells[3].Text;
Line 268: txt_cateIn_hardCopy_update.Text = gridTo_updateFrom.SelectedRow.Cells[4].Text.Replace(" ", "");
Line 269: txt_prodID_update.ReadOnly = true;
The code of update:
private void PopulateDropDownList() {
string constr = ConfigurationManager.ConnectionStrings[1].ConnectionString;
using (SqlConnection con = new SqlConnection(constr)) {
using (SqlCommand cmd = new SqlCommand("SELECT CategoryProd_ID,Cate_Pro_Name FROM CategoryOfProduct", con)) {
using (SqlDataAdapter da = new SqlDataAdapter(cmd))
[Code] .....
I want to update the data using vb.net , my webpage has many dropdownlistlist ,
I got an error when update the dropdown field ,
"Dropdownlist error: SelectedValue which is invalid because it does not exist in the list of items."
I have a dropdown list that has a bind on it and I get this error. Why am I getting this error and what can I do to fix it. here is the code for the dropdown I currently have:
[Code]....
I have a page with some bound DropDownLists (DDLs) for a Call Logging system. The Calls are categorised on three levels for example:
Call: 3069, Category 1: Incident, Category 2: Microsoft Application, Category 3: Word would be used to organise calls for problems with Microsoft Word. On testing the system, I noticed that there was no handling for opening a call if the category had been deleted - say for reorganisation/systems no longer supported whatever. So I set about trying to make the program behave in the following manner:
Check category ID exists in DDL before bindingIt doesn't: set the displayed text of the DDL to Category Name + "(Deleted)"Disable the control to prevent user changingMove on to next control Seemed simple enough, however no matter which way I try and do it I always get the messase ddl_Cat1 has a SelectedValue which is invalid because it does not exist in the list of items. What's really puzzling me is that the exception doesn't seem to be being thrown in the code behind. I've gone through line by line from Page_Init and it never throws and exception. Just when the page loads this appears.
Does anyone know of a reason as to why this wouldn't work? (I've already tried setting the selected value to an existing item, adding a new list item with the value and setting DataSource property to Nothing - in all different combinations.)
I think this needs to be a sticky since this is not solved anywhere that I have been looking... I have been googling this for a while now and came across the answer by shear luck and a simple typo when I was writing the code...
Problem: I have 2 dropdown lists...
ddllist1 and ddlist2... Both are code-behind populated via a sql DB.
they are cascading lists via the ajax control.
I am trying to dynamically populate them with values from a DB for edit reasons.
When I try to get them populated I kept getting the error...
"dropdownlist has a SelectedValue which is invalid because it does not exist in the list of items"
Solution:
1) get the values from the DB or from where ever...
2) create a sql select to get the values from the ddl db
3) set the ID of the first DDL control to cddcontrol1.SelectedValue = id (this is a number)
4) set the value of the DDL to the string value ddlist2.SelectedValue = value (this is a string)
here is the code.
[Code]....
I am gettng the above error when I am using the Cascading Dropdown list in a DNN application. Everything works 100% until I try to post the form to the db then the error is thrown.I have attached the relevent code
[Code]....
i try to fetch the data from the database and display text in the dropdownlist
i got the error message
'cmbslot' has a selectedvalue which is invalid because it does not exist in the list of items parameter name value cmbslot.Text = obj.getdata(dr["slotcode"].ToString()); //here is my code to retrive the data from the database
I am getting this error yet I know it to be untrue.This is the code:
ddlPartnerOrganisation.DataSource = agency.AgencyGetListOfEYDN();
string temp = ddlPartnerOrganisation.SelectedValue.ToString();
ddlPartnerOrganisation.DataValueField = "AgencyID"
;
ddlPartnerOrganisation.DataTextField = "AgencyName"
;
ddlPartnerOrganisation.DataBind();
I have a FormView with an EditItemTemplate. In the EditItemTemplate I have a RadioButtonList. I want to populate the selected button from the database. My code looks like this (simplified):
[Code]....
The stored procedure usp_GetOrderDetails returns a char(1) column called "side" which can have values of 'B' or 'S'. If it's a B or an S I want to select the correct item in the RadioButtonList, radSide. Is this possible? I've done it for my Text boxes and dropDownLists on the same form OK, I just can't figure out the RadioButtonList.
Using ASP.NET 4.0 with C#.
I have a GridView and have sortable columns. When a column is sorted the GridView automatically selects the top row, however the SelectedValue is still representing the row before the column is sorted. The SelectedValue of the GridView only gets changed when a row is selected, but I want that to happen when the GridView is sorted.
For example if I have this in my code:
[Code]....
itemId is populated with the old SelectedValue not the new one after the GridView has been sorted.
My page has a gridview, and the gridview has a TemplateField called "Acciones" (Actions). The column Acciones has a ImageButton with CommandName "Select" and CommandArgument "Tutor". Thus, the GridView has controlled event "SelectedIndexChanged". The idea is that in GV_SelectedIndexChanged, I must to set DropDownList's SelectedValue property. But, the value seted in this function don't affect the rendered dropdownlist. The debugger talk's that the value is correctly seted, but the visual result don't.
View 4 Repliesi want to display selectedvalu on dropdonwlist i have a access table like this;1 Adana2 Ankaraits displaying the numbers of cities but i want to display name of the cities in my gridview how can i fix that ? im using theese codes for register page;
string baglan =DugunSitemiz.Properties.Settings.Default.baglan;
OleDbConnection conn = new OleDbConnection(baglan);
conn.Open();
[code]...
Using VB.Net/Asp.Net 2008, web app with Master page.I have a content page where all of the content is wrapped in an UpdatePanel that uses a UserControl called GetEmployee.ascx that I created.
In the user control I have a listbox filled with employeeIDs for the DataValueField, in fact for testing to make sure I'm getting the ID I temporarily set the DataTextField to employeeID also. Anyways I keep getting "" error saying I have not selected anything even when I do so I put a breakpoint and set a watch to find out selectedIndex, value and item and nothing.
after the user selects an employee they should click on the "select employee" button so I have some code there to find out which employee was selected. I have events setup in the GetEmployee.ascx user control to get the value selected:
[Code]....
and I have a breakpoint and it hits the "selectedIndexChanged" event first so I put a watch there and see the following.
<WatchValues>
SelectedIndex = -1
SelectedItem = Nothing
SelectedValue = ""
</WatchValues>
why am I not seeing the selected value?
I've been binding dropdownlists within detailsview controls like so for years
SelectedValue='<% Bind("Field1")%>'
Now in VS 2008 is kicks out the error in the subject line. So what gives? And how do we bind dropdownlists then?
I'm populating a dropdownlist in a formview with a different datasource from the formview's. I need to set the selected value according to the value in the formview's datasource but I'm having a hard time doing that.
Here's the code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ID"
DataSourceID="SqlDataSource1">
<EditItemTemplate> [code]....
I'm using a FormView which has odsMain as the datasource. I am also using a dropdownlist which is being populated with objectdatasource odsddl.
I'd like to set the selectedvalue of the dropdownlist with the value contained in odsMain (the current record value for it). Is there any way this can be done?
There has to be a solution.I've been trying to figure this out for a year.This is my current code:
protected void gvTicketList_SelectedIndexChanged(object sender, EventArgs e)
{
// Get the SelectedDataKey of the selected Ticket in GridView
[code]...