I've been binding dropdownlists within detailsview controls like so for years
SelectedValue='<% Bind("Field1")%>'
Now in VS 2008 is kicks out the error in the subject line. So what gives? And how do we bind dropdownlists then?
Using VWD 2010 Express.
I tried to put a ListView onto a webform but got an error right after that:
Error Creating Control - ListView1
The 'CssClass' property cannot be set declaratively.
BTW, does ListView support horizontal/vertical scroll bar? As I might have about 50 records in maximum, so need to have horizontal and vertical scroll bars. But do not need paging.
How can i remove an error of gridview which indicate that " the selected property can't be set declaratively.
View 2 RepliesI've noticed that on aspx page IntelliSense doesn't display the Style property of a web control, even thought the control does have a Style property. Does that mean we shouldn't declaratively set the Style property:
<asp:TextBox ID="UserName" Style="color:Green; padding:0px; margin:0px;" runat="server"></asp:TextBox>
I have a dropdownlist in DetailsView to which items are added programmatically during DataBound event. It is working fine in InsertItemTemplate, but in EditItemTemplate i am getting this error "'branchDDL' has a SelectedValue which is invalid because it does not exist in the list of items. Parameter name: value".
. Following is the code:
<asp:TemplateField
HeaderText="Course"
SortExpression="branchID">[code]....
I have a asp.net FormView with a DropDownList for the selection of a month. The FormView is data bound to an ObjectDataSource.
<asp:DropDownList ID="MonthsList" DataSourceID="MonthsListDataSource" DataTextField="Value" DataValueField="Key" SelectedValue='<%# Bind("OrderDate.Month") %>' Width="100" runat="server" />
I like to bind the selected value to the nested property 'Month' of 'OrderDate' as shown above. The property OrderDate is of type DateTime. The error I'm getting while binding to a nested property is:
A call to Bind was not well formatted. Please refer to documentation for the correct parameters to Bind.
I am using javascript to validate user input on my aspx page. I am easily able to validate textboxes and dropdown list for differenet scenarios.
Now, on one of my dropdown lists (for country), I need to check if it is an allowed country or not for a particular service. I have stored the valid country list in a static property. Is there a way to validate my dropdownlist selected value against that static property?
function validateService(source, args)
{
var country = document.getElementById('<%= ddDestCountry.ClientID %>');
var service = document.getElementById('<%= ddService.ClientID %>');
// Get allowed country list from my static class
var countryList = document.getElementById('<%= StaticProperties.EUCountryList %>');
if (service.value == "P")
{
// I want to do something like this
if (!countrylist.Contains(country.value))
{
args.IsValid = false;
}
else {
args.IsValid = true;
}
}
return;
}
Update(Additional Information): The static property is read-only so it cannot be tampered with from the page.
This is driving me nutty... I have a gridview on a page. On the same page is a web user control with several public properties. Using the gridview's selectedindexchanging event, I try to set the user control property, but it's always null. Like this:
protected void grdPhysicians_SelectedIndexChanged(object sender, EventArgs e)
{
usercontrol1.ID = grdPhysicians.SelectedValue.ToString(); [code]....
If I write the grdPhysicians.SelectedValue to the page, I can see it's there. It just won't pass to the web user control.What I'm trying to do is have a master record form with child records in a web user control and just pass the selected record id into it.
protected void grdPhysicians_SelectedIndexChanged(object sender, EventArgs e)
I have a FormView with an EditItemTemplate. In the EditItemTemplate I have a RadioButtonList. I want to populate the selected button from the database. My code looks like this (simplified):
[Code]....
The stored procedure usp_GetOrderDetails returns a char(1) column called "side" which can have values of 'B' or 'S'. If it's a B or an S I want to select the correct item in the RadioButtonList, radSide. Is this possible? I've done it for my Text boxes and dropDownLists on the same form OK, I just can't figure out the RadioButtonList.
Using ASP.NET 4.0 with C#.
I have a GridView and have sortable columns. When a column is sorted the GridView automatically selects the top row, however the SelectedValue is still representing the row before the column is sorted. The SelectedValue of the GridView only gets changed when a row is selected, but I want that to happen when the GridView is sorted.
For example if I have this in my code:
[Code]....
itemId is populated with the old SelectedValue not the new one after the GridView has been sorted.
My page has a gridview, and the gridview has a TemplateField called "Acciones" (Actions). The column Acciones has a ImageButton with CommandName "Select" and CommandArgument "Tutor". Thus, the GridView has controlled event "SelectedIndexChanged". The idea is that in GV_SelectedIndexChanged, I must to set DropDownList's SelectedValue property. But, the value seted in this function don't affect the rendered dropdownlist. The debugger talk's that the value is correctly seted, but the visual result don't.
View 4 Repliesi want to display selectedvalu on dropdonwlist i have a access table like this;1 Adana2 Ankaraits displaying the numbers of cities but i want to display name of the cities in my gridview how can i fix that ? im using theese codes for register page;
string baglan =DugunSitemiz.Properties.Settings.Default.baglan;
OleDbConnection conn = new OleDbConnection(baglan);
conn.Open();
[code]...
Using VB.Net/Asp.Net 2008, web app with Master page.I have a content page where all of the content is wrapped in an UpdatePanel that uses a UserControl called GetEmployee.ascx that I created.
In the user control I have a listbox filled with employeeIDs for the DataValueField, in fact for testing to make sure I'm getting the ID I temporarily set the DataTextField to employeeID also. Anyways I keep getting "" error saying I have not selected anything even when I do so I put a breakpoint and set a watch to find out selectedIndex, value and item and nothing.
after the user selects an employee they should click on the "select employee" button so I have some code there to find out which employee was selected. I have events setup in the GetEmployee.ascx user control to get the value selected:
[Code]....
and I have a breakpoint and it hits the "selectedIndexChanged" event first so I put a watch there and see the following.
<WatchValues>
SelectedIndex = -1
SelectedItem = Nothing
SelectedValue = ""
</WatchValues>
why am I not seeing the selected value?
I'm populating a dropdownlist in a formview with a different datasource from the formview's. I need to set the selected value according to the value in the formview's datasource but I'm having a hard time doing that.
Here's the code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ID"
DataSourceID="SqlDataSource1">
<EditItemTemplate> [code]....
I'm using a FormView which has odsMain as the datasource. I am also using a dropdownlist which is being populated with objectdatasource odsddl.
I'd like to set the selectedvalue of the dropdownlist with the value contained in odsMain (the current record value for it). Is there any way this can be done?
There has to be a solution.I've been trying to figure this out for a year.This is my current code:
protected void gvTicketList_SelectedIndexChanged(object sender, EventArgs e)
{
// Get the SelectedDataKey of the selected Ticket in GridView
[code]...
The question has probably been raised many times, but I could not find an answer so far.The error is: ropdownlist has SelectedValue which is invalid because it does not exist in the list of items.However, I have debugged the values and the list has the correct list of values which includes the SelectedValue.
View 5 RepliesHow would I go about populating a textbox within a FormView with the SelectedValue of a GridView? I'd like to know how to do this with the GridView on the same page as the FormView or a GridView passing a parameter from another page.
View 2 RepliesI have a form that's being databound with a SQLDataAdapter. I have a DropDownList with a SelectedValue='<%# Bind("FieldName")%>' on it. I was wondering if there was a way I could remove this field and set it dynamically in the codebehind and still have it insert the value of this field with the SQLDataAdapter. The reason for this is because the control I'm using doesn't have a separate InsertItemTemplate, only an EditItemTemplate which serves both purposes, and I need this to dropdownlist to only be databound on Insert.
Right now it's looking like I'll have to stop using the SQLDataAdapter and Update/Insert the data in the codebehind, but I wanted to see if there was something I was missing just-in-case.
I don't know what wrong with my code. I always get empty value by using following statement(in GridView_SelectedIndexChanging event)
string IDTextValue=GridView1.Row[SelectedIndex].Cells[1].Text;// <-- My Column (which hold the key value) index is 1
How can I get correct value in code behind file? I used sqldataSource and GridView. I need handle some business logic in code behind file.
I have a drop down list inside a formview control's edititemtemplate and itemtemplate. The dropdown list is not bound to a data source. I am hard-coding the listitems for the drop down list. The formview is bound to a datasource. All I want to do is set the selectedvalue of the dropdown to what is in the record from the database. But I keep getting the error.
<asp:formview .....>
<edititemtemplate>
.... //some other controls like textboxes that are correctly bound and display the value from the datasource
<asp:dropdownlist ID=myddl runat=server cssclass=myclass selectedvalue='<%# eval("mychoice") %>'>
<asp:listitem value='0'>I dont know</asp:listitem>
<asp:listitem value='1'>Yes</asp:listitem>
<asp:listitem value='2'>No</asp:listitem>
</asp:dropdownlist
.....//rest of the edititem controls that display correctly.
</edititemtemplate>
Just for kicks, I added a textbox and set it's value to eval("mychoice") as well and it correctly prints 0,1 or 2. So, I know that there is no illegal value coming back from the datasource. It seems as something with the timing of events - when the listitems are getting bound to the ddl. The error I get is - "myddl has a selectedvalue which is invalid because it does not exist in the list of items".
I have a query that references many tables, however the main record doesnt necessarily have records in the other tables. In my formview itemtemplate, i bind the values of the query but I'm getting an obvious error when the value is null. This is what I'm trying to do: (the field is a boolean btw). These fields are hidden so I don't really care if it gets assigned a temp value or something.
[Code]....
Error: BC30452: Operator '=' is not defined for types 'Object' and 'System.DBNull'.
I have Gridview inside that i have RadioButtonList,Which is working perfectly. It also bind correctly.
Problem is when user navigate page,the value which was slected in previous page is not apper again.
Gridview is enabled with paging.
I want to save data on SUBMIT button which is outside gridview. So when user clicks this button it should get ALL selectedvalue of radiobuttonlist inside gridview INCLUDING paging and save it to database.
I have tried following code on Button_Click but its not working properly.
[Code]....
We use gridview for showing a data from table.It show fine in certain case like in table field dispostion is data and test but in table we put the string Ineligible Member/Member No Longer Enrolled - Spoke to Target and Wrong Number After Skip Tracing then it gives error. 'DropDownList1' has a SelectedValue which is invalid because it does not exist in the list of items.
The following is snippest my code ,tell me where i am wrong.
[Code]....
I've got a gridview which displays records from a table in SQL Server. Next I've got a details view which displays the details from the selected record. This works fine.
When the user selects a record, which then gets displayed in the details view, I'd like to make it possible for the user to edit the record. I've done searchs for this online, and found lots of responses, but none quite displaying an answer to the question I've got. I'm sure it is a simple thing I've done wrong, but at this point I don't know what it is I've done wrong. I've getting this error,"'DropDownList1' has a SelectedValue which is invalid because it does not exist in the list of items.Parameter name: value".
I've got a SqlDataSource to display the data in the details view. And then I specified another SqlDataSource to use for the dropdownlist control in the details view. I converted the field, in the details view, to a template field and have been replacing it. Here's the SqlDataSource controls definitions:
[Code]....
and here's the info for the details view:
[Code]....