Forms Data Controls :: Binding To Multiple Stored Procedures?
Jan 16, 2011
I have a situation where in a legacy app (VB6) I have a grid which is populated by any one of a large number of (100+) stored procedures. Each of the procedures returns one or more rows with an identical list of columns (including column names, column data types, column order). I am basically looking at the (best) options to keep things reasonably light weight. Each procedure has its own set of parameters, each of which would result in different query plans etc. I have tried using each query to exec select into a (temp) table which is encapsulated into a "master" query which then returns a single results set, but it breaks SQL, the query optimiser returns an infinite number of rows - this is a MS documented issue. Looking for possible ways forward: generics, model view etc
View 3 Replies
Similar Messages:
Feb 25, 2013
I have 2 store procedures and I need to populate DataList using the two stored procedures
GO
ALTER procedure [dbo].[ViewSreg]
@Mobile nvarchar(30)
as
begin
select *
from S_register
[Code] ....
View 1 Replies
Oct 18, 2010
ringht now i am working with one web page, in that page i have 3 sections of data [or 3 set of data] in 1 set 4 to 5 fields actions to be taken when we click on save button 1st it should save the 1st fields data in one of my sp and it should get the table level id it should loop that table level id into another set of records & insert into to the another sp
View 4 Replies
Dec 23, 2010
This is my stored procedures with 3 selects statements
[Code]....
Now I have to fill two dropdown from the forst 2 select statements and need to fill some label through the 3 statement for this I did this
[Code]....
Its working fine my
[Code]....
Now I want to bind others controls. But I am not getting that how dataset differentiate which data need to bind to which control. How I can do this.
View 5 Replies
May 26, 2010
I was reviewing my old post about this issue with a accessdatasource and that was simple since the Select, Update and Delete were all written within the datasource.
But this page im having issues with is using SQLDataSource and pointing to Store procedures. My issue is that i have created the sqldatasource with Insert(storeprocedure), Select(actual select statement), Update(storeprocedure) and was trying to take advantage of gridviews capabilities for editing when connected to a datasource that has all those elements setup.
Here is my datasource and gridview code: The gridview row goes into edit mode, but the changes never take affect on the database.
[Code]....
View 1 Replies
Jan 8, 2011
i have a gridview and the delete option.
when i press delete button i want to run my stored procedure which requires an input variable. how can i do this?
View 1 Replies
Oct 13, 2010
I tried it and it only returns the first table.
View 2 Replies
Apr 27, 2010
I am using Visual Studio 2008 and SQL Server 2008 and have added a SQL datasource to my form.
When I configure the datasource, I choose my connection string which looks like this in my webconfig:
<connectionStrings>
<add
name="PSFSPRD_ConnectionString"
connectionString="Data
The database I am using has a schema called EQB and as such, my stored procedures are named as EQB.usp_SelectFunds, EQB.usp_SelectAccount, etc.
On the select tab of the Configure Data Source screen, I choose to use a stored procedure. The dropdown shows my stored procedures, however, the schema name does not show up in front of the stored procedures in the drop down. I see only usp_SelectFunds, usp_SelectAccount, etc.
I select one of the stored procedures and when I click TEST, I get the message that the stored procedure is not found. If I instead choose to use a SQL statement instead on the configuration screen and enter EXEC EQB.usp_SelectFunds and click TEST, it works fine.
Why are my stored procedures not showing up correctly in the stored procedure drop down and how can I fix this?
View 3 Replies
Feb 3, 2011
I am using a sql stored procedure which returns multiple result sets. By default Sql Datasource is binding the first result set to gridview. I want the second result set to be binded. I browsed all the properties in Sql datasource but could not find one to set this.
View 4 Replies
Aug 9, 2010
Background: I use stored procedures exclusively for an ASP.NET application. I am using a DataReader to load a dataset object.
View 4 Replies
Feb 2, 2011
I need to retrieve data from a stored procedure, but not from a reader. I need to insert and read to see if there is an error code returned so I can Display It
[Code]....
This inserts data into a stored procedure, since I have a promotion going on, I want to check to see if anyone has tried to create several accounts to try to be Customer #100 or so on, I have achieved this in the procedure, and set RETURN @ErrorCode = 1
Have I Set up the SqlParameter Correctly, or do I now have to declare a direction for each parameter?
I have had problems reading from Stored Procedures and Tutorials Seam Straightforward, but thay are about readers only not Input Output
View 3 Replies
Jun 3, 2010
When i bind gridview to stored procedure what i found it only shows data after enabling Autogeneratecolumns and it also doesnot show any column in boundedfield. Due to which i am unable to apply formating to individual column according to my requirement. One possible reason may be table is created in stored procedure due to which it generate fields at run time.
View 7 Replies
Mar 29, 2010
Im new to ASP.NET (Normally use PHP), and im currently designing a website in VB.NET and SQL Server.
When using LINQ to SQL i know that it uses parametarized queries and we dont need to add them.
So do we need to use Stored Procedures in LINQ (for security reasons)???, If yes How
View 3 Replies
May 7, 2010
How can I encrypt all Stored Procedures of a database at once?
View 3 Replies
Dec 20, 2010
here I am binding two dropdownlist and featching some value from database through stored procedure
below is my sp
ALTER PROCEDURE [dbo].[Get_OpenCostCode]
-- Add the parameters for the stored procedure here
(@UserId NVARCHAR(50)) [Code]....
and here is the .cs code
[Code]....]
but wen i run this shows error,There is already an open DataReader associated with this Command which must be closed first.
I also put in my connectionstring tag in webconfig file MultipleActiveResultSets=true;
View 12 Replies
Dec 2, 2010
I have registration page.I am using mysql
In back end i wrote stored procedure as
[Code]....
I wrote code as
[Code]....
If i enter available user i value show zero
is corect what i wrote?
I am confusing while inserting ,select data from database using stored procedure
View 1 Replies
Apr 10, 2010
we have sql server running on a server.
when person A connects to sql server from their machine and executes a stored procedure (a stored procedure which runs a query and sends an email) - it executes and the email is received.
when person B connects to sql server from their machine and executes the same stored procedure, it executes but the email is never received.
does this mean the stored procedure is executing locally on both users machines?
if not....then why does person B's execution of the stored procedure not generate the email?
View 2 Replies
May 28, 2010
I want to write dynamic store procedure means 1 select_sp, 1 update_sp, 1 insert_sp, 1_delete_sp for all tables.
How it is used in secured manner.
View 2 Replies
Apr 6, 2010
Should I just write to file before a stored procedure is executed or should I log the stored procedure into a table? If the latter one is recommended, how should I go about doing that?
View 4 Replies
Jan 8, 2010
I am having a problem returning a value from a stored procedure when using SqlDataSource. The stored procedure is executing because 'invoice_no is incrementing but Myreader.HasRows is always false.
Here is the table definition
`invoice_no` int(10) NOT NULL AUTO_INCREMENT,
`employee` varchar(50) DEFAULT NULL,
`create_date` timestamp NULL DEFAULT CURRENT_TIMESTAMP,
PRIMARY KEY (`invoice_no`)
Here is the stored procedure:
CREATE PROCEDURE `GetInvoiceNumber`(IN username VARCHAR(50), OUT InvoiceNum INT)
BEGIN
INSERT INTO invoice (employee)
VALUES (username);
SELECT MAX(invoice_no) INTO InvoiceNum FROM invoice;
END
And here is my code.
[Code]....
View 2 Replies
May 25, 2010
Ive created a new LINQ To SQL class and dragged several tables across from my server, in my code I access them like this
[Code]....this is all ok, however, I have several stored procedures that I want to use as well, but when I drag the stored procedures across I get a compilatiopn error
Error 60 'DB_BL.DB_BLDataContext': type used in a using statement must be implicitly convertible to 'System.IDisposable'
how do I use stored procedures from LINQ with a using clause ?
View 7 Replies
Jan 6, 2010
can we create overloaded stored procedures in sql server
View 7 Replies
May 12, 2010
how to create stored procedures using vbscript, and how to pass the parameters to the stored procedures...
View 6 Replies
Aug 18, 2010
Is it possible to change the select, insert and update stored procedure of an SqlDataSource at run time. I don't mean to change the definition of the stored procedure, but I mean to change the assignment, i.e. To change the select stored procedure from "selectSP1" to "selectSP2" at run time. Is it possible?
View 4 Replies
Mar 2, 2010
I open a sqlconnection and sqlcommand. I execute a stored procedure and get the scope_identity from that procedure to be used within another procedure that needs to be fired. Unfortuntley if the second procedure fails forwhatever reason the data change for the first procedure commits anyway. I kind of want to do a began transaction end transaction on the c#.net side. Also I need to execute a stored procedure multiple times....
View 2 Replies
