i try casting the gridview datasource to datatable using the following code but the datatable always nothing.
Dim DT As New DataTable
DT = DirectCast(gv.DataSource, DataTable)
the gridview is bound using dataset at code behind without using sqldatasource.
i m trying to filter the gridview without geting the data from database, is there is another way to do this?
I am making shopping cart application.On Viewing Shopping Cart,when i try to update the quatity of product column it permit me to edit but wn i click update link.the gridview disappears wid all products.send me some code snippet in C# as i want only quantity column to be editable.I am using the following code:in Code behind File
protected void GridView1_RowEditing(object sender, GridViewEditEventArgs e)
{
GridView1.EditIndex = e.NewEditIndex;
[code]...
I am new to asp.net.I am buliding an online shopping application.Could anyone tell me the steps to edit records in gridview which have its datasource i.e. datatable.Means the shopping cart wil display its products.i want to do editing in gridview say quantity or product which automatically edit records(quantity) in datatable and then gridview wil again get bind to new edited datatable and able to show edited records say edited quantity of taht product.
View 4 RepliesI have one gridview and i want to take all the values in a datatable or dataview.
I tried like this
DataTable gridTable = (DataTable) dataGrid1.DataSource;
but gridTable is showing null, it should not show null because gridview has lot of records with 3 columns
Is there any way i can convert/store a gridview.Datasource records in a datatable or dataview?
I have a GridView that sorts and has paging features. I need to grab the data from the SORTED DATA from the GRIDVIEW and put it into a DataTable. Who Do I get that sorted data gridview and store it into a DataTable. I am an ASP.NET Programmer. Goal: Get and Store Sorted GridView Data into a DataTable.
View 2 Repliesi have the dataset with one table.Table contains three column like 'Name','Location','Pin'.I would like to move the data from another table based on schema.
View 2 RepliesI have a bit column that is saved as 1 or 0 in the database. I want to check the value in the table and then do an if statement depending if its 1 or 0. How can I convert it to an int?
i had
lockValue = (int)sqlCommand1.ExecuteScalar();
I want to assign it to the lockValue int variable. I then want to go on and check
if (lockValue == 1) {
// stuff
}
I am trying to use a datasource with a dropdownlist. Eventually, my data source method to call a stored procedure and load the datatable is returns, but for now, I am just creating the datatable manually. I need each item to have two attributes, the text, whixh the user will see in the DDL, and the value that the program will retrieve from and store back to the file.
It is partly working in that the DDL has 3 items, however the text for each item reads "System.Data.DataRowView"
I have to be close, but I can't figure out what I am doing wrong.
[Code]....
Can we convert the Repeater items back to a datasource?
At post back, I want to convert the repeater items into a datatable which is a datasource was given to the repeater.
I have a delimted file , like a csv file but the delimters are # and not ,
I assume I would use SqlConnection and SqlDataAdapter
So for a csv file what is the sequence to read in for example c:datademo.csv
What would the connection string be.
Also can you specifiy a different delimiter.
The code below is what I assume it would possibly look likea although its only a frst guess.
[Code]....
I am trying to populate a gridview using two tables. I also have a strongly typed dataset and used the method on this page: [URL] the problem is that, when i try to use two table the gridview does show up (I checked through debugging that the datatable comes back as empty).
View 2 RepliesOkay, so I have a Generic IList of custom objects that I want to use as a datasource for a repeater.
[Code]....
In the WebForm inside the repeater, I place this code:
[Code]....
when I try to run it, I get the error "Unable to cast object of type 'System.Collections.Generic.List`1[MyCustomObject]' to type'MyCustomObject'. ". Which makes sense, really.
What's the best way round this? Is there any way I can get the direct cast working? I'm loath to have to create a custom list item that implements IBinding or something and bind that directly, as that'll mean a lot of legacy changes which may create further bugs. Or is there a better way?
System.InvalidCastException was unhandled by user code
View 4 RepliesI use the DetailsView control to display selected employee's data for HR. The list of data elements has gotten pretty long so I thought I'd put some tables & panels inside the ItemTemplate and EditTemplate. Testing with NO code behind in effect works perfectly on display & update. Now I need to manipulate some stuff in the code behind which requires me to cast the controls I'm after. However old cast code doesn't work (it says the row index doesn't exist).
First is a clip of the DetailsView which gives me 3 nice columns.
[Code]....
I have two datatables, I want to get all records which are in one datatable but all matching records which exist in another datatable should not be available.
In terms of set, you can say that record which are in 1st datatable but not in 2nd DataTable.
I've got a GridView that's databound to a DataTable that I have stored in Session. I want to be able to add a LinkButton into this gridview so I can delete rows from the DataTable, however, I need to reference the rows in the datatable somehow.
I figured the simplest was
[Code]....
but the problem is, I need to somehow cross-reference the particular row I want deleted.
I'm trying to sort GridView but I have problem with converting DataSource to DataTable. Object of DataTable is empty. I don't know how to convert it.Do you have any ideas? Here is my code:
private void SortGridView(string sortExpression, string direction)
{
DataTable dt = GridViewDzialania.DataSource as DataTable;
DataView dv = new DataView(dt);
dv.Sort = sortExpression + direction;
GridViewDzialania.DataSource = dv;
GridViewDzialania.DataBind();
}
iam insert data through gridview using datable, and i have 2button , insert and delete button , i wants to delete a row from the gridview using delete button below the code i constructed for insert, how to delete the row.
protected void Button2_Click(object sender, EventArgs e)
{
//delete button
} [code].....
I am creating a data table dynamically which has 10 rows and binding that table to Gridview. In Gridview, I am having 4 dropdownlist, 5 textbox and 1 label controls .
here i want to give clientside validations using javascript for textbox but I am unable to find the textbox control of a gridview using javascript.
I have a data table, in one of the column, I will have this data, I will bind the data table to a grid view. I was hoping that this column change to a hyperlink. But, it was display the entire text.
<A HREF="page_url">Remark(s)</A>
When I view the page source code, I saw this:
<A HREF="page_url;Remark(s)</A>
How to correct this?
How can I loop through each column and determine what data is different in the two said data tables?
View 6 Replieswhat it is i have a datagrid bound to a datatable.This datatable fills from a sql table. This datatable will have 2 columns which is 'part' and 'description'.What it is I want to have a couple of chk boxes next to the datagrid which will filter it by column 'part'.The issue is the datagrid will have about 1000 records so i dont want to do a for next loop searching for field part for a certain filter
View 1 RepliesI have a dataset that has two datatables. In the first datatable I have EmpNo,EmpName and EmpAddress. In the second datatable I have Empno,EmpJoindate, EmpSalary. I want a result where I should show EmpName as the label and his/her details in the gridview. I populate a datalist with the first table, and have EmpNo as the datakeys. Then I populate the gridview inside the datatable which has EmpNo,EmpJoinDate and EmpAddress. My code is
[Code]....
My Design is
<asp:DataList ID="Datalist1" runat="server" DataKeyField="EmpNo">
<ItemTemplate>
<asp:GridView ID="Gridview1" runat="server">
</asp:GridView>
</ItemTemplate>
</asp:DataList>
I do not get results in the gridview, instead have errors. I tried then placing the bound field
<asp:GridView ID="Gridview1" AutoGenerateColumns="true" runat="server">
<Columns>
<asp:BoundField DataField="EmpNo" />
</Columns>
It throwed an error stating / A field or property with the name 'EmpNo' was not found on the selected data source.
Tried several different ways to do this but am just not seeing it. Proably a quick solution for someone more skilled than me.
I have a gridview generated from a datatable. One of the columns is "client name" whose data is generated from a class.
I added a link button for the column header that fires a sub that should sort the datagrid, but is not.
Here is the code I have so far that creates the gridview which works fine:
Private Sub PopulateCaseListGrid()
'Kill the existing DataSource, in case of a page reload
gvCaseList.DataSource = Nothing
'Create a datatable with whatever column you want to use
[Code]....
I have a Gridview that I am trying to add Paging to, however when the 2nd page is selected all I get my EmptyDataText.
In reviewing multiple sites and forums they have stated to send your Datatable to a Session - What am I missing here?
ASPX Page:
[Code]....
Code Behind:
[Code]....
