If my dataset contains any null values, then the 3D stacked bar (or column) chart crashes with the "Index is out of range" error.It works fine for 2D for the same data set.
View 1 Repliesi'm trying to create a stacked bar chart on a vb web form using vs2010.My data source returns:
Error in Functionality Awaiting on Supplier
1IMT IssuesmActive6
IMT Issues,Awaiting on Supplier
2,IMT Issues,Awaiting on User 4
IMT Issues Closed 120
Login / Password Active
But I can't get this into a stacked chart. I know I must have to do quite a bit of work declaring what the series are and soforth, or having a different dataset but can't find any documentation on it.A link to some documentation or an example of a stacked chart from an sql datasource would be much appreciated.
I need to create the following stacked bar chart using the MS Chart control:
[IMG]http://i54.tinypic.com/2d1ti05.jpg[/IMG]
My table structure is as follows:
PEStaffAssessmentID int
PESubmissionID int
Q1_ConfidentDelivering int
Q2_ProfessionalAttitudes int
Q3_LeadershipEffective int
Q4_SupportedByPeers int
Q5_AssistedInexperienced int
Q6_ConfidentKnowing int
Q7_AbleToTalk int
Q8_CommunicationEffective int
Q9_ConfidentSupporting int
Q10_TeamShares int
Q11_CareDeliveredSafely int
Q12_MinimumMaintained int
Q13_MeetOwnExpectations int
Q14_SpendEnoughTime int
Q15_ProvidePhysicalCare int
Q16_ProvideEmotionalCare int
Q17_SpiritualCare int
Q18_ProvideCare int
Q19_ManageWorkload int
Q20_HighestStandardCare int
Q21_MoraleLevel int
Q22_RateCareReceived int
So each column in my datasource need to represented by a row in the graph. and the contents of the stacked bars should be the values in the fields. how to set up the series in the chart object to reflect this?
I have an issue in using dot net chart control. In chart last column is not completely shown which give bad appearance and on right side of chart it looks like TickMark are enabled. I set MajorTickMark of AxisY2 disabled but still tick marks on right side.
View 2 RepliesI am trying to add a tooltip to each AxisX label on a Stacked Bar Chart. It displays the same value all the way across. Below is the code
With.ToolTip =
Chart1.ChartAreas("ChartArea1").AxisX"Month = #VALX"
.Interval = 1End With
I have not found any way how to stack 3D pie charts. Stacking seems to me available only with Stacked Bar, 100% Stacked Bar, Stacked Column, and 100% Stacked Column.This is example from ASP.NET Chart Control examples gallery, but this one is without any code behind ...
The only way how to at least get closer to this I've found is to create two series of data, each in its own chart area, but it's creating duplicated legend entries and with collectind small pie slices it changes color data entries. (Like that Ownership, Renting and Leasing labels are duplicated and with differenc colors)
I have to draw 100% Stacked Bar Chart using ms Chart Control.I want the stacked bar chart to be shown like following images i have uploaded .
http://www.flickr.com/photos/55961659@N05/?saved=1
I want to display line permanently in Y axis in stacked chart , limitation is 3000 and now i am displaring yearly value ,i want make two column for one year value display 1.Total 2.total sales of the all the mobile.
Code :
protected void Page_Load(object sender, EventArgs e) {
DataTable dt = new DataTable();
dt.Columns.AddRange(new DataColumn[] {
new DataColumn("Apple"),
new DataColumn("Nokia"),
new DataColumn("Samsung"),
new DataColumn("Sony"),
[code]...
[Code]....
Stacked-column chart has inconsistent column segment widths
I want to create a stacked bar chart using jquery.I have already done the chart using static values ,but I have now to do it with dynamic values.Please can anyone help me,its very urgent.I am using the flot plugin,if any other plugin is good or feasible
View 1 Replies am using VS 2010.I am new to this (AJAX RAD Controls/AJAX RAD Charts).I am having an xml file having 3 tables.Now my requirement is to plot a Stacked bar Chart dynamically retrieving values from different tables.
I have retrive values from different table into One Datatable named "ValuesToDisplay"
05:30 06:00 06:30 07:00 07:30 08:00 08:30 09:00 09:30 10:00 10:30
how to freeze the x axis of the chart control in ms chart? need to use because data displayed at large amount that is scrollable.
View 1 RepliesAm I going mad/blind? Probably a combination of the two.
How does one go about removing the data labels from a pie chart with the new chart control in .net 4?
I can get these to display as tooltips absolutely fine, but ultiamtely I'd like the labels not to be present as it looks rather busy.
I've searched previous answers and seen code behind resolutions but surely there must be some sort of code infront option to turn these labels off?
I am using MS Chart control (3.5), and have a requirement where I need to display 2 pie charts. The datapoints for the pie charts is set programatically. My doubts are as follows:
1. Can I display both the pie charts in a single chart control and area, or do I have to use two controls? (Currently I am using two controls)
2. How can I maintain the same size for both the pie charts? This is my main concern, since the pie sizes keep changing, depending on the number of datapoints. I tried using custom properties like "MinimumRelativePieSize", but it's not working.
I started using the awesome chart controls with my asp.net apps recently and so far they've been nothing short of breath taking. Right now I have a weird problem, on the first load of my page, the chart control appears correctly and the tooltip is correct, however, when I update it with new data, the chart displays correctly, but the tooltips are for the previous set of data.
I hope this makes sense. The first time I load the chart, the pie chart segments and tooltips are correct, after a partial postback (to get the new data), the pie chart segments are correct but the tooltips are for the previous data set.
Basically once the tooltips are set the first time, they can't be updated after that without a full page postback.
Here's how I set the tooltip:
[Code]....
Anyone else noticed this behaviour and have a work around?
Currently my only workaround is to check for a partial postback and not render the tooltip, which I'd rather not do as the tooltip display actual statistical data as opposed to the pie itself (which uses percentages).
how we can make Multi- series 3D column chart using ASP charts
View 4 Replieshow I can display gridviews stacked one after another with spaces in between??? <br /> doesn't work.
View 2 Repliesusing the control in web application.
View 1 RepliesI'm going through the ASP.NET chart controls WebSamples project but I haven't found what I'm looking for yet. So basically if I had a standard bar chart with data such as below:
John - 68%
Fred - 75%
Mary - 32%
Anne - 88%
Displaying it in one series with names as the x axis and percentages as the y, is there anyway to change or highlight the bar colour of just one, so say all the bars in the series are blue but I want to programmatically change mary's bar colour to red. Is this possible?
I want to develop a Chart control in asp.Net 3.5 where in each section 2 data are comparing each other(like multiple Column) . In my attachment image that is first One.
View 1 RepliesIs there a way to add a legend to the chart it creates? I have created a line chart and by default it has created different colors for the different y - axis data.
I would like a legend on the side that displays what data goes with which line color.
I'm using MS Chart Controls, i want to add a feature to my charts, im primarily using Bar charts. I will have a large numnber of Data points on my chart for example 20 bars etc, i want to limit the display to 10 so if there is more than 10 it will only show the last 10 bars and display a scrolling bar to scroll back and fort to see all the charts. I have the code to do this, and it works extremely well, only problem is. the code is in VB.NET I've converted it to C# and I am not getting any errors on page_load but my code doesnt seem to affect my chart in anyway, basically it doesnt work. Just wondering could some one have a look at my code and give me any pointers where i may have gone wrong or if anyone has ever got something similair to this working in c#. Im going to post both the VB.NET and the C#,
VB CODE
[Code]....
C#
[Code]....
I am using a Chart Control, and I have 2 series. In my case 1 for month and 1 for year. The problem is when the chart control is displayed during run time for some reason the legend has 4 entries 1 says Mont, 1 says Year, 1 says Series 1, and 1 says series 2. My question is why are there 4 entries for the legend?
View 5 RepliesI am using the Chart control unbound and binding data to it at run time. It is a bar chart. When it is displayed after applying the data the X axis is drawn vertically and the y axis is drawn horizontally. I want the opposite but cannot find how to change the orientation.
View 6 RepliesI have a Bar Chart being driven by the user search criteria. Is it possible to make it so they can click on the bars, or label of bar, and have it taken them to another page to see more details?
View 1 Replies