Using the code below, I am able to load my dynamic dropdownlist and supply it's selectedindex. But when I fire the update command I can see that the information displayed has been lost.
when I fire the update I don't lose data!
[Code]....
I have a very simple datalist setup to a SQLDatasource. Displaying the data works great. But I want to replace the plain databinder container with a hyperlink instead and have that link setup to point to a detail page with a parameter. Here is my datalist setup:
[Code]....
On another page im using gridviews adn able to do what i need by using the RowDataBound of the gridview like so, how can I accomplish the same thing with a datalist?
[Code]....
I tried using the ItemDataBound and trying to modify the logic above to fit the datalist, but cant figure out how to, so I have it commented out at the moment.
[Code]....
I have a question involving the ItemDataBound EventI have a linkbutton, btnOverview, that is displayed in a DataList ItemTemplate.I would like to select 1 of 2 imageurls for this button based on the value of haseOverview which is a field returned by the SelectCommend of the sqlDataSourcefor the DataList. I am not sure of how to reference this field.I have highlighted what I think is he relevant code section below.
[Code]....
[Code]....
I have a problem with a GridView control.I am using the UpdateCommand but the new value is not being stored. If I hard-code in the value to the aspx page it works fine but not if I pass the parameter.The value I am trying to update is called "PC_NAME" an it is an integer.
[Code]....
How specify input parameters to UpdateCommand
View 3 RepliesI'd like to pull several NewValues from a FormView and write them to a database as part of the Update command.For some reason, I am unable to do this using the following code. Is there something I am missing?
[Code]....
I previously had a datalist bound to an objectDataSource. Within the ItemDataBound event, i could quite happily access the current bound row as follows:
[Code]....
where ASPNETDB was the database and tblJobs the tableadapter. I could then reference the tblJobs items as job.JobId and job.StartDate etc. Upon chainging the datalist to a listview, I can't seem to find any way of accessing the same data. I've tried ListViewItem and ListViewDataItem, is this the right method or am i missing something?
I have a ListView that is managing a link click event through the OnItemCommand and the list pages the data.
<asp:ListView
runat="server"
ID="lvRequests"
ItemPlaceholderID="litPlaceHolder"
OnItemCommand="lvRequests_ItemCommand"
DataSourceID="odsResults"
OnItemDataBound="lvRequests_ItemDataBound">
<LayoutTemplate>
</LayoutTemplate>
<ItemTemplate>
<tr>
<td>
<asp:Label runat="server" ID="lblSPNMatch" Visible="false" />......................
i have a grid in which i did this :
i get into console it is giving this error on update click :
Uncaught Sys.WebForms.PageRequestManagerServerErrorException: Sys.WebForms.PageRequestManagerServerErrorException: Updating is not supported by data source 'ExistingSqlSource' unless UpdateCommand is specified.
I am using the ItemDataBound event of a ListView to attach data for the different kind of templates I am using. Well, actually, want to use - I have not yet figured out how to know which template is coming in in the ItemDataBound event. I want to figure out if it is the edititemtemplate, insertitemplate, itemtemplate, etc. All these templates have different controls (edit and insert are the same though) and I need to set the controls contained in them.
View 3 RepliesI am using a listview to which I want to bind the MembershipUserCollection which you get from GetAllUsers(). I don't want to use reflection, I want to assign it in the ItemDataBound event of my listview. I've done this before, but with datatables. The code will be something like DataRow dr = (e.item.DataItem as DataRowView).Row. You can then access specific columns with
dr["ColumnNamehere"].ToString().
But how do you do this with MembershipUserCollection?
I've an usercontrol:
[Code]....
in code behind
[Code]....
I want to assign Class="current" to <a> tag to itemtemplate = CurrentTabName property
In ItemDataBound event:
[Code]....
How I can assign Class="current" to tag <a> of itemtemplate?
how many times itemDataBound event calls exactly, if my datatable have 2 records it is calling 4 times , first time in item index 0 , second time it is 1 and third time again it contains index 0 and forth time it is 1. so, could anyone please help me how the itemdatabound event actually works,
View 5 RepliesI had a scenario where I needed to massage some data before it got bound to a repeater control, so I first thought to use ItemDataBound event to handle it. I assume this would also apply to gridviews, listviews, etc. The pattern I've seen used to do this is something like:
if (it's the right row type, item, alternating item, etc..)
{ someType row = (someType) e.Item.DataItem
someControlType control = FindControl("controlID")
control.PropertyYouWant = row.FieldYouWant }
In thinking about my task, I'm thinking, ok, intercept the data before it's bound, change it, then let it proceed and do it's normal thing... so the step of finding a particular control and assigning the data to a property of it (like 'text' or 'innerhtml') seemed like an extra step to me? do you always need to explicitly assign the data you want to a control to display? For example, say you have a div tag and the field data needs to be it's content. This already happens when I'm not handling ItemDataBound myself to change the data, is there a way to handle the ItemDataBound event to change the data and have it just display where it would if you were not handling the event? The aspx markup already has an <%# Eval("fieldName") %> within the div tag for placement. I know there is an alternative way to handle the call to massage the data right inside the aspx with a helper function like: <%# HelperFunction(Eval("fieldName")) %>, which is what I have used, but I would like to understand the option of using the ItemDataBound event.
I stumbled into a problem which is that FindControl will only return a control in the ListView after the listview has been databound. Here is the code which is not working, and I'm getting the "Object reference not set to an instance of an object error" when I try to add the attribute to the control:
[Code]....
Any ideas on how I can elegantly fix this?
System.InvalidCastException was unhandled by user code
View 4 RepliesI am populating an asp.net listview control from my page_load event. Unfortunately, due to my projects requirements, I have to use a third party control within my listviews ItemTemplate that needs to have database values written to its attributes before my listview control is bound, if this is not the case my control flags a null reference exception error. From some investigation into the listview control, it seems that the only way to do this is through my listviews ItemDataBound event as my thrid party control will hold different value depending on each row.was wondering if it's at all possible to force my listviews ItemDataBound event to fire before I call mylistview.databind();?
View 27 Replieshow do i fire the itemdatabound event for a repeater control which is nested inside a another repeater control
code is in vb.net
I wrote the following code in ItemDataBound Event of the DataList
[Code]....
I have got two questions:
1) If I have already given the data type to d as DropDownList, why do we need to typecast it again to e.Item.FindControl("dd1"). Is it because it will typecast this to the data type of the selected item in Drop Down list?
2) Why do we need to write this in Item Data Bound Event of the DataList?
I tried to generate Button control on the fly repeater's ItemDataBound event.
[Code]....
However, when I am about to capture the gridview's itemcommand event, it seems like the command doesn't work.
using a listView control... I'm trying to use the ItemDataBound event to map a field's native value to a more 'friendly' name... so far I have the code to access the underlying data so the decision can be made for the actual mapping, but I don't know how to actually change the data displayed?
View 4 RepliesI need to utilize about 30 different database values from within a repeater ItemDataBound Event and I am wondering if there is a better way to do it. I am currently exposing them by doing something like this 30 times:
[Code]....
Rather than making 30 declarations, is there a way I can make them all available as short variable names? The variable name could be the same as the field name.
I am using a DataList to display records from SQL backend in ASP.net 2.0 Framework 3.5. In the ItemDataBound I am setting up a Hyperlink's URL and enabling/disabling it based on data.
The HTML is as follows:-
[Code]....
and in the vb code:-
[Code]....
This is all working correctly in IE, but in Opera, FireFox and Safari while the Hyperlink works, the control is not disabled if Stk.Docs = 0.
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False"
DataSourceID="SqlDataSource1" ForeColor="#990000"
AutoGenerateEditButton="True" onrowupdated="GridView1_RowUpdated"
onselectedindexchanged="GridView1_SelectedIndexChanged"
AllowSorting="True">
[Code] ....
i have simple repeater control on my page:
<asp:Repeater id="Repeater1" runat="server" DataSourceID="SqlDataSource1">
<ItemTemplate>
<asp:TextBox id="txtBox1" runat="server" Text='<%#Eval("attributename") %>'></TextBox>
<ItemTemplate>
</Repeater>
I'm bounding data to repeater control by using SqlDataSource Control
bounded data is something like this:
attributeid attributename
1 color
2 size
How can I get access to attributeid values in Repeater control's ItemDataBound event handler,
I tried to use DataBinder.GetPropertyValue(container,"attribuetid"), but I can't set container, am I doing right, or maybe I should use another approach.