Forms Data Controls :: Datapager In UserControl Not Paging?
Jan 5, 2010
I have a listview control and a datapager control in a ascx page, this is then embedded in the aspx page.
When my page loads the records come up, and the page numbers appear in the pager, however, when I click on any of the page numbers, the page is always blank, no records.
View 14 Replies
Similar Messages:
Jan 18, 2011
Im pretty confused on this and would appreciate any suggestions.Im trying to implement custom paging because my database has some 400,000ish records and i want to show 20 at a time in a gridview. I don't want to use a datasource in the html because this gridview gets populated using a dataset in the .cs (c#) because
the user first filters on params. I have two sp (on to get the total record count and one that filters). Both sp work.
[Code]....
and...
[Code]....
Does anyone know how i can tell my gridview (and if i need to implement a datapager) the total number of records, to get the page numbers on the bottom correct and then pass the parameter @PageNum @PageSize@sortExpression?
View 7 Replies
Apr 13, 2010
I'm using a datapager control on my listview to perform paging in it.When paging through the table, I need to perform some validations. When these validations are not successfull, the paging should be cancelledI currently perform the validation in the PagePropertiesChanging event of the ListView, however, the arguments do not provide a Cancel property.
[Code]...
View 6 Replies
Nov 1, 2012
I was wondering if there were any decent tutorials on paging the records in a ListView using a DataPager (Pager Control). I can get it to work with Drag and Drop but I can't seem to find a decent tutorial on doing it programmatically.
View 1 Replies
Apr 4, 2010
I have a usercontrol with a datagrid that is used throughout my web application. The datasource is passed in a public method from the master page to this usercontrol, as the data selection is different on each page where this usercontrol is used.But by doing this, I'm having a problem with paging, as the datasource is lost after postback. I can't do the data selection in the usercontrol itself as the dataset is passed as a parameter.
View 9 Replies
Mar 31, 2011
i have a listview to show some data and with it i have a datapager the datapager is used for allowing change pages between products but i have and hyperlink above product image that allow to see the specific product details but the datapager wehn a used clicks to see product details should not be visible because there is no more pages , its a specific product but the datapager should be visible in the other scenario how can i do that?
View 2 Replies
Jul 8, 2010
I'm trying to use a DataPager to do Server Side paging. Here is my code
<asp:DataPager ID="pgrFooBars" PagedControlID="lvFooBars"
QueryStringField="page" runat="server" >
<Fields>[code]....
The problem is that the DataPager appears to be using the Count property of the ListView to determine the total number of records, which in this case is 20. Somehow, it needs to know that there are 1,500, not 20 total records. The DataPager has a property TotalRowCount, but this is read-only.I have never seen a DataPager example with Server Side paging, but assumed that it could do Server Side Paging, otherwise what good is the QueryStringField attribute?
I am aware that you can do a custom paging solution using methodology like the 4GuysFromRolla did here http://www.4guysfromrolla.com/articles/031506-1.aspx, but I'd first like to know if a solution with the DataPager is possible before creating a custom solution.
UPDATE,The more I look at this, the more that I'm coming to the conclusion that this is not possible and that, unfortunately, the datapager is a control meant for small web sites only. What I want to do should really be quite simple if the control were built correctly. I want to be able to say
dpFooBars.TotalRowCountComputed = false;
dpFooBars.TotalRowCount = AnyNumberThatISoChoose;
I've been looking for some hack to accomplish the same thing, but it appears that the datapager's TotalRowCount is computed from the actual number of items in the datasource that it's bound to. It seems very odd to me that Microsoft would create a ListViewPagedDataSource() class and a DataPager at the same time and not have them work correctly together, but this appears to have been what has happened.
UPDATE 2 (AHA MOMENT?It seems that it has been possible to do server side paging since .Net 2.0 by using an ObjectDataSource and customizing the SelectCountMethod(). I believe it should be possible to customize ObjectDataSource to suit my needs. Hmmm. I'm going away for the weekend, so it'll be a couple of days for me to see if this works. Stay tuned, true believers.
View 2 Replies
Apr 14, 2010
I'm using a datapager control on my listview to perform paging in it.
When paging through the table, I need to perform some validations. When these validations are not successfull, the paging should be cancelled.
I currently perform the validation in the PagePropertiesChanging event of the ListView, however, the arguments do not provide a Cancel property.
protected void MyListView_PagePropertiesChanging(object sender, PagePropertiesChangingEventArgs e)
{
if (!Validate())
{ // cancel the paging action}
}
View 2 Replies
May 13, 2013
i am applying paging in list view. i used data pager control. but problem is on click of next page next data is not displaying only showing previous data. i have one dropdown i am bing list view on dropdownindex change event not in page load.
<div id='main-content' style="overflow: auto; width: 100%" class="printable">
<asp:ListView ID="LSVAllSlips" runat="server" GroupItemCount="2" GroupPlaceholderID="groupPlaceholder1"
ItemPlaceholderID="itemPlaceholder1" OnPagePropertiesChanged="LSVAllSlips_PagePropertiesChanged">
<LayoutTemplate>
<table>
<tr id="Tr1" runat="server">
[code]...
View 1 Replies
Nov 18, 2010
Is there a way to use the GridView paging and having the links not use JavaScript. So that when you click on the page number 5 (for example) that link is a hyperlink.
View 3 Replies
Jul 17, 2010
This is page load
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{ [code]...
But in my ascx.cs when IButton1_Click is trigered My name is null
private string _sname;
protected void Page_Load(object sender, EventArgs e)
{ [code]...
View 2 Replies
Feb 9, 2011
I'd like to implement a custom paging template for my formview that displays numeric paging as well as next/previous buttons. The pre-defined templates only appear to have numeric first last as an option. Can anyone recommend a good article that covers this?
View 2 Replies
Mar 13, 2011
How to use datapager with gridview in asp.net 4.0 ?
View 2 Replies
Sep 24, 2010
is there any chance to set DataPager width to 100% or to a static width of some px?
View 2 Replies
Aug 17, 2010
I have just downgraded 2 of my asp.net projects from framework 4 to framework 3.5. It looks like the latest framework has broken the datapager functionality. I consider this a pretty fundamental part of presenting data to the UI. Has anyone else experienced problems, and does nayone know when Microsoft will fix the problem. In my case when paging away from page one and then changing the page size via a dropdownlist (see below) all work fine.
If navigating to the last page and then selecting some more search criteria to perform another search the pager returns no records found, the record counts etc hold the previous search result counts and it is not until the search button is clicked again that the expected results are rendered.
All works correctly now, as intended after reverting back to framework 3.5.
<div id="divPagerTop" runat="server">
<asp:DataPager ID="DataPagerTop" runat="server" PagedControlID="lstResults">
<Fields>
<asp:TemplatePagerField>
[Code]....
View 2 Replies
Mar 19, 2011
I have a listview control and for paging I've used a datapager control. Problem is that it is appearing right hand side of the listview control. But I want to place it at the bottom of listview control. can any tell me why this is happening.here is the code
.newdiv
{
height:500px;
width:500px;
}
<div class="newdiv">
<asp:ListView DataSourceID="SqlDataSource1" ID="productlist" runat="server">
<LayoutTemplate>
<asp:DataPager ID="DataPager1" PageSize="4" runat="server" PagedControlID="productlist">
<Fields>
<asp:NumericPagerField />
</Fields>
</asp:DataPager>
</LayoutTemplate>
<ItemTemplate>
</ItemTemplate>
<EmptyDataTemplate>
<div>
Sorry no data found
</div>
</EmptyDataTemplate>
</asp:ListView>
</div>
View 3 Replies
Mar 2, 2010
I'm trying to populate the DataPager using Container.DataItem (I'm not allowed to use FindControl) but I get this error
'System.Web.UI.WebControls.DataPager' does not contain a definition for 'DataItem' and no extension method 'DataItem' accepting a first argument of type 'System.Web.UI.WebControls.DataPager' could be found (are you missing a using directive or an assembly reference?)
The code:
[Code]....
View 4 Replies
Mar 25, 2011
I have a Listview with a Datapager. The Data pager is inside the listview LayOutTemplate, and works fine when there are records to page.
Now the problem is that the Datapager shows even when there are no records to show. (the navigation is disabled).
it shows something like Page
0 of
0 (
0 records).
For example, in my sample application, I have set the Pager size to 10, but I have ZERO records. Idealy, I only want it to be visible
if the number of records exceeds the pager size. How do I do this?
View 1 Replies
Oct 13, 2010
I have a listview control qith a datapager. I'm using a linkbutton for next and previous. I have a css class that makes the text Arial, and bold. It also sets the size to 10px. When I run the page, the link button is Arial and bold, but I can't change the size of the text. I've tried setting it to 10px, 8px, even 5px, 10pt, and xx-small. Nothing changes the font size. My customer wants the next and previous buttons to look a certain way. I'll have to manage paging manually if I can't get this figured out.
View 28 Replies
May 18, 2010
I have a listview and a datapager for it c outside of the listview. I would also like to add a datapager in the GroupSeparatorTemplate. I have added it, but when I try to go to the next page of the ListView the page takes a long time to do the postback and, at the end, it doesn't go to the next page.
<div id="paging">
<div>
<span><asp:Label ID="lbl_paging" runat="server" EnableViewState="false"></asp:Label> </span>
<asp:DataPager ID="dpAccommodations" runat="server" PageSize="6" PagedControlID="searchresults" EnableViewState="true" QueryStringField="page">
<Fields>
<asp:NextPreviousPagerField ShowNextPageButton="false" ShowPreviousPageButton="true" ButtonType="Link" PreviousPageText="Prev" NextPageText="Next" RenderDisabledButtonsAsLabels="true" RenderNonBreakingSpacesBetweenControls="false" ButtonCssClass="prev"
/>
<asp:NumericPagerField ButtonType="Link" CurrentPageLabelCssClass="pager" RenderNonBreakingSpacesBetweenControls="false" NumericButtonCssClass="lala"/>
<asp:NextPreviousPagerField ShowNextPageButton="true" ShowPreviousPageButton="false" ButtonType="Link" ButtonCssClass="right on" NextPageText="Next" RenderDisabledButtonsAsLabels="true" RenderNonBreakingSpacesBetweenControls="false"/>
</Fields>
</asp:DataPager>
</div>
</div>.............................
View 6 Replies
Aug 12, 2010
I have a listview in a page and I use a DataPager to do the paging. Each time the user clicks a page's number, the page does a postback and it shows the next "x" items. My problem is that I rewrite the url with isapi rewrite and when the user is being redirected to the second, third etc page of items the friendly url is being replaced by the non-friendly url of the page.
View 5 Replies
Jan 30, 2010
I am trying to use the photo_id of a picture whilst a user uses a datapager to select different images. I am also getting the photo_id of the pictures through a label within the listview. However now i need that value so i pull out comments from another table according to this photo_id..
I currently have th following code:-
[Code]....
View 8 Replies
Jun 7, 2010
I have a listview where it's content is from a datatable. Programmatically, when the user goes to the webpage, the listview is binded to a datatable like so:
[Code]....
I want to now add a DataPager but this code isn't working:
[Code]....
Clicking on the page numbers either has no response or clears out the listview or distorts the data.
What can I do to make DataPager behave correctly?
View 1 Replies
Mar 4, 2011
I have a Listview Control and the paging is implemented using the DataPager control.
I have set the maximum pagesize=5 of the datapager.
But when I click the next or previous buttons it loads the same set of products, no matter how many times I click on the next/previous buttons,
[Code]....
And here is the code behind file
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
[Code]....
View 2 Replies
Oct 8, 2010
environment: VWD 2010 Express, SQL 2008 Express, .NET 4.0, VB
I have a page with 4 radio buttons followed by 3 cascading ddl followed by a tab container with 5 tabs. Each tab holds a listview, etc that is particular to the group that has access to that tab. On page load I filter the listview based on who is logged in plus which radio button and DDL is selected - all ok so far.
after the page load, the initial datapager works fine and all other listview functions are fine. However, if I select the 4th radio button, the data returned is correct and the datapager shows as if it knows the correct number of items but if I click the datapager page 2 (or Last, etc) it immediately reloads the correct data as if it were a new page load (and changes the datapager appropriately). My suspicions are that this is due to the declarative select command defaulting to the data that it always goes back to.
I have tried to move the select to the code behind and played with the tabcontainer prerender event. That eventually got me to the point where the datapager was working properly but then I could no longer edit any of the dropdowns in my listview edit screen where I could before. They would go through the motions but as soon as you selected a new dropdown value, it would revert back to whatever it was before.
So at this point I'm looking for ideas on how to make these work together.
the code is excessive so I will avoid that for the moment until I can whittle it down to what is pertinent
View 6 Replies