Forms Data Controls :: Date Range Filtering Using Textboxes Through The Select Command?
Feb 19, 2011
I am using a gridview in (Visual Studio 2010) to display records from a SQL 2005 database. I can filter my date range successfully but it does not include the end date. I have tried using the between expression as well as >= <= to return the dates from the beginning and end dates. I have search and found that this is due to the time portion of my datstamp in the SQL column (02/19/11 01:03:36 PM) where I am filtering by short date (02/19/11); therefore leaving the end date out of the records returned.
Now the solution I have read is to add a day onto the endate like this: 02/19/11 + 1 but I get a conversion error returned from the SQL server. I have tried to use convert in this matter to convert the textbox.text in the selectcommand to datetime 101 formats to overcome this but I must still be missing something because it comes back with another SQL error unable to convert nvchar to datetime.
In the end I would like to have my two textboxes StartDate - EndDate filter the dateStamp column in my Transactions table and if both textboxes have the same date return records for that date only and include the EndDate if the range is more than one day.
I have tried many different variations of the below code using $,#,+ and & symbols to encapsulate the EndDate controlparameter to add a day to the EndDate and have failed at all attempts.
This my markup that filters fine excluding the EndDate;
[Code]....
I have tried using this as well and work excluding the EndDate:
[Code]....
selectcommand="Select * from Transactions where DateStamp Between @StartDate and @EndDate">
View 1 Replies
Similar Messages:
May 3, 2010
I am trying two calculate a date range from two textboxes. I currently have:
[Code]....
the date in textbox1 comes from cdrcalendar. I need to include cdrcalendar2 somewhere. Something along the line of "with cdrCalendar.SelectedDates and with cdrCalendar2.SelectedDates".
View 5 Replies
Sep 8, 2010
I need to validate two textboxes for date range in client side. what is the best approach ?
View 3 Replies
Apr 9, 2010
i'm trying to issue a select command in my app soi could execute the command and retrive the data into a string variable.the problem is that this command is overloaded with DataSourceSelectArgument and i can't figure out what it is.i'm using sql server express and when issue a n insert command for example sq.Insert(); i have no problems.this the command that's holding me:
SqlDataSource sq = new SqlDataSource();
sq.ConnectionString = ConfigurationManager.ConnectionStrings["CustomerDatabaseConnectionString1"].ToString();
sq.SelectCommandType = SqlDataSourceCommandType.Text;
sq.SelectCommand = "SELECT * FROM CustomerTable where customerID = 1";
string result = sq.Select(some overload that's stopping me);
View 5 Replies
Jan 25, 2011
I have gridview. some columns are data, and some are link buttons. now, I need move these link buttons to a hovermenu. this is done. but I got a javascript exception, and it is because if there is no row was selected in gridview, it will pop this.
so, the question is: how can I select a row in gridview without select command? simply by code?
View 3 Replies
Jun 23, 2012
I have two drops downs one for dislaying month & other for year till the current year
Here all months & year from 1900 till current year is displayed
I need to display the month or make user select the month & year only till one year back , not beyond that current month is june 2012
The user should be able to select months from may 2011 to june 2012 only
Same thing I need to accomplish with calendar control....
View 1 Replies
Apr 21, 2010
have created a data table as global data table for the session. So when the user selects the drop down Address Type Main , Street, Emergency - I want the Address text fields to display based on user selects. So, for my dropdown i have datavaluefield column as addressid. And the datasource for this is datatable. I was having problems converting from datatable to dataview. Does anyone know how to do this? I was geting errors cant convert from datatable to dataview. I was choosing dataview because you have the filter option. But then I saw you could also select in data table. So I am trying to select a row in datatable with select with expression like this:
Dim dtAddress As
New DataTable
dtAddress = GlobalVariables.AddressTable
[code]...
View 11 Replies
Aug 21, 2010
I have a table containing courses, columns are
Name - "Yoga Classes"
DateStart - "2/23/2010"
DateEnd - "2/24/2010"
I am using ListView Control to bind it, is there a way to display them and group them by Month? for eg.
January
Piano Class (10th Jan 2010 - 11th Jan 2010)
Guitar Class (10th Jan 2010 - 11th Jan 2010)
February
Yoga Class (15th Feb 2010 - 16th Feb 2010)
etc...
View 5 Replies
Sep 3, 2010
I have data from multiple tables that I would like to display in a gridview via a stored procedure. I need to select the data based on a date range and display it. Once displayed I need to include a button that would allow the user to export the gridview data to an excel spreadsheet. Does anyone have an out of the box solution or know of a tutorial I can use to accomplish this feat? I am currently using 2.0 for this project. I am newish to .net.
Here is my stored procedure that calls the data from multiple tables.
[Code]....
View 3 Replies
Sep 25, 2010
I has developed a crystal report, which display the records from a table and filters them based on a parameter( date range parameter). now I has integrated the report into a asp.net page using c#, but when I am running the asp page it is not promption for the date range values, it used to prompt for date range when I run the report in crystal report.
View 2 Replies
Mar 19, 2010
i have used one query like this
Select skillReq from tblPostJobs where SkillReq like '%Silverlight 2.0%'
it is working fine. But while giving
Select skillReq from tblPostJobs where SkillReq like '%Silverlight 2.0,C#%'
It is not filtering data from database. It is only checking starting and ending Character.In my database some keyskill are like that
Asp.net 3.5,4.0,C#,Sql server 2008,Silverlight 2.0,3.0.
My requirement is to check each word in "SkillReq" text.
View 3 Replies
Jan 6, 2010
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 Replies
Feb 13, 2010
I have a gridview bound to a dataset and I do not want to display the id column or the select hyperlink. How can I have a user click anywhere in a row and have the application behave as if they clicked the standard select hyperlink. the one or two approaches I have seen on blogs have not been successful for me. maybe I was missing a piece
View 4 Replies
May 7, 2015
I am in need of filtering the datatable only with Month and Year .
I am able to perform this in SQL using
Year(date) =2015 and Month(date)= 5
How to perform this using Row Filter ...
View 1 Replies
Nov 18, 2010
[Code]....
This is my Grid view source basically i want as soon as i click on Select Button , the corrsponding Row Data get's redirected to another Page with the Data I know how to redirect to another page with query string only thing is that where and how i can store the data my .cs source
[Code]....
View 5 Replies
May 26, 2010
I want to click on a date in the calendar and use that date in an insert command.
I have inserted a Calendar in Visual Web Developer and cannot figure out how to get the date so i can use it when inserting a new entry in my table... how do i "catch" the date and how to insert it as date.
I have the insert command working with dummy fields...
View 3 Replies
Mar 14, 2010
I have a standard gridview, with the standard paging and sorting interface enabled.The application holds appointments for three organisational units, with a maximum of 3000 appointment records being returned across all three units. The appointment records are quite small.
The choice I am faced with is to:
1. Have an Org Unit dropdown which returns to the datasource on change of selection and at inital databind, and returns appointment records for one org unit at a time i.e. approx 1000 records.
2. Have the objectdatasource return all 3000 appointment records for all org units at initial databind, and filter the objectdatasource by org unit on change of selection, thereby saving a trip to the datasource.
I guess the question boils down to identifying the point at which querying the datasource by org unit is more efficient than filtering the records returned by org unit.
Is 3000 records a lot for a gridview to be paging and sorting etc.
View 3 Replies
May 7, 2015
how to filter BETWEEN two dates or two customer ID's.
View 1 Replies
Jul 6, 2010
I would like to know if I can do the following: when I am in insert mode, can I dynamically change the select command of and then display that result in the second dropdownlist based on what was selected in the first dropdownlist.
I would like to include the minimum code to demonstrate what I am trying to do.
[Code]....
[Code]....
View 4 Replies
Jan 5, 2010
Two ddl inside gridview. on selecting first ddl1 fill next ddl2 by passing selected value as parameter by executing the sqldatasource select command in codebehind.code:
GridViewRow gr = (GridViewRow)((DataControlFieldCell)((DropDownList)sender).Parent).Parent; //find the control in that DropDownList d1 = (DropDownList)gr.FindControl(ddl1); DropDownList d2 = (DropDownList)gr.FindControl(ddl2); SqliaDataSource.SelectParameters.Add("@name", d1.SelectedItem.Text.ToString()); dataView dv=(dataview) SqliaDataSource.select(DataSourceSelectArguments .Empty);
Error: There is no source code available for the current location. and Returns null value
View 3 Replies
Dec 12, 2010
i have gridview i added it select command field i want when it is clicked,the id of the table displayed in label and i have update command field but the problem the update can't update the primary key i want when it is clicked update all the record
View 7 Replies
Sep 6, 2010
I have a table in my Database called Creditors.
One of the columns is Paid which is type Bool.
On my aspx I have an objectdatasource and gridview. In the DAL is a method called GetCreditors which
returns all the creditors into the Gridview.
In some cases the "paid" column is ticked and in other not.
I want to run a select query that only gets the rows where PAID is not Ticked. insead
of retrieving all.
View 1 Replies
May 11, 2010
I'm creating a confirm delete like popup with an iframe to use along with a gridview. When you click delete on a gridview row, the iframe shows up and asks if you would like to delete the associated image as well from the server. It works perfectly the first time I delete a row. After that whenever I click select or edit on a new row, it calls the rowdeleting event from the last deleted entry every time. I'm stumped.Here's the Sub:
'// Event that Occurs when the Delete Button is Clicked //'
Protected Sub Confirm_Delete(ByVal sender As Object, ByVal e As GridViewDeleteEventArgs) Handles GridView1.RowDeleting
Dim file_name As Array = Split(GridView1.Rows.Item(e.rowIndex).Cells.Item(10).Text, "/")
If file_name.getLength(0) = 1 Then
file_name = Split(GridView1.Rows.Item(e.rowIndex).Cells.Item(10).Text, "")
End If
Dim fn As String = file_name(file_name.getLength(0) -1)
fn = replace(fn, ",", "%2C")
fn = replace(fn, " ", "%20")
Dim url As String = Me.Master.get_root_url & "CrimeBulletinProject/ConfirmDelete.asp?img_list=" & fn & "~!"
confirm_delete_frame.Attributes.Add("src", url)
confirm_delete_frame.Attributes.Add("style", "display: block; left: 50%")
End Sub
Here's the GridView:
<!-- // Main Data Table Section // -->
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" BackColor="Black" BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" CellPadding="3" DataKeyNames="ID" DataSourceID="ArrestsDB" CellSpacing
= "1" GridLines="None" CssClass = "GV_Row" >
<PagerSettings Mode="NumericFirstLast" Position="TopAndBottom" />
<RowStyle CssClass = "GV_RowStyle" />
<Columns>
<asp:CommandField ButtonType="Button" ShowDeleteButton="True" CausesValidation = "True"
ShowEditButton="True" ShowSelectButton="True" HeaderText="Options" />
<asp:BoundField DataField="ID" HeaderText="ID" InsertVisible="False"
ReadOnly="True" SortExpression="ID" />
<asp:TemplateField HeaderText="Photo">
<ItemTemplate>
<img class = "GridViewImg" onclick = "popup_EnlargePhoto_EditForms(this.id)" id = "<%# DataBinder.Eval(Container.DataItem, "FileNumber") %>, <%# DataBinder.Eval(Container.DataItem, "LastName") %>, <%# DataBinder.Eval(Container.DataItem, "FirstName") %>"
alt = "<%# DataBinder.Eval(Container.DataItem, "LastName") %>, <%# DataBinder.Eval(Container.DataItem, "FirstName") %>" src = "<%# DataBinder.Eval(Container.DataItem, "PhotoLink") %>"></img>
</ItemTemplate>
</asp:TemplateField>
<asp:BoundField DataField="FileNumber" HeaderText="File #"
SortExpression="FileNumber" />
<asp:BoundField DataField="LastName" HeaderText="Last Name"
SortExpression="LastName" />
<asp:BoundField DataField="FirstName" HeaderText="First Name"
SortExpression="FirstName" />
<asp:BoundField DataField="MiddleName" HeaderText="Middle Name"
SortExpression="MiddleName" />
<asp:BoundField HeaderText="DOB (mm/dd/yyyy)" SortExpression = "DOB" DataField = "DOB" DataFormatString = "{0:MM/dd/yyyy}" />
<asp:BoundField DataField="Charge" HeaderText="Charge"
SortExpression="Charge" />
<asp:BoundField DataField="OfficerInCharge" HeaderText="Officer"
SortExpression="OfficerInCharge" />
<asp:BoundField DataField="PhotoLink" HeaderText="Photo Link"
SortExpression="PhotoLink" />
<asp:BoundField DataField="LocationOfArrest" HeaderText="Location Of Arrest"
SortExpression="LocationOfArrest" />
<asp:BoundField DataField="AdditionalInfo" HeaderText="Additional Info"
SortExpression="AdditionalInfo" />
<asp:BoundField DataField="Zone" HeaderText="Zone" SortExpression="Zone" />
<asp:BoundField DataField="DateOfArrest" HeaderText="Date Of Arrest (mm/dd/yyyy)"
SortExpression="DateOfArrest" DataFormatString="{0:MM/dd/yyyy}" />
<asp:BoundField DataField="DateAdded" HeaderText="Date Added (mm/dd/yyyy)"
SortExpression="DateAdded" DataFormatString="{0:MM/dd/yyyy}" />
</Columns>
<FooterStyle BackColor="#B5C7DE" ForeColor="#4A3C8C" />
<PagerStyle BackColor="#E7E7FF" ForeColor="#4A3C8C" HorizontalAlign="Center" />
<SelectedRowStyle CssClass = "GV_SelectedRow" />
<HeaderStyle CssClass = "GV_Header" />
<AlternatingRowStyle CssClass = "GV_AltRowStyle" />
</asp:GridView>
View 4 Replies
Aug 7, 2013
Can I have a example for Selecting GridView Row by clicking anywhere on the row without select command and also mouse over and mouse out background color change.
View 1 Replies
Mar 14, 2011
I have a window that has 3 dropdownlist controls and a textbox with a Calendar Extender associated to it.
I have the following on my pageload event so when the Page loads the current Date is put in the date textbox:
[Code]....
I can change the date fine but when I select a value from one of the other dropdownlist controls it puts the date back to today's date...The only place I am setting the Date to the current date is in the pageload event...
how can I get it to keep the date to what I change it to after I select a new value from one of the dropdown lists?
View 4 Replies
