Forms Data Controls :: GridView Refreshing Data Prematurely?
Jan 3, 2011
I am trying to implement a GridView. This GridView needs to allow users to read and update data from a single table. The data in the GridView is the population for a city/state. Please note the use of the DISTINCT as some cities in a state have multiple postal codes. Regardless, to edit this information, I'm trying to use the following GridView:
[Code]....
The information is displayed as I would expect. My problem is with editing. When I click the "edit" link, a TextBox associated with the population is displayed as expected. When I click "update" though, my change fails to persist. I fired up SQL Profiler and found that the data in the Grid is being refreshed before the UPDATE statement is being sent. Because of this, the original value is being sent. what am I doing wrong? I just need to update the Population value of the cities with the value entered by a user.
View 7 Replies
Similar Messages:
Nov 21, 2010
On my aspx page I use a popupmodalextender to show (and edit) some data that is contained in a gridview (gridview is on the same page). Popup works OK and also the editing of the data, but when I close the popup (from code behind) the data in the gridview is not refreshed.
Aspx:
[Code]....
Code behind:
[Code]....
Why doesn't databind() work until I refresh the page?
View 16 Replies
May 14, 2010
I have a very strange problem here I am using a GridView which shows nothing the the page loads for the first time. But when user selects something from the dropdown above, it DataBind()s against whatever is returned by the stored procedure.
If ran the code in debug mode, it showed that gvMyGrid.Datasource had data in the list returned by SP.Then I did gvMyGrid.DataBind(), it keeps the same empty view.I tried one more thing, I bound the grid when the page loads for the first time to one of the default values returned. It showed the data but when I changed the dropdown selection, it kept the same data.
View 2 Replies
Oct 2, 2010
I am trying to update my count value in gridview once i have click on my link my count value is updated, i am already do this using javascript and also i hv do this change in database and get the proper responce of that.
But i want to do that without refreshing page or gird my count value is increase which is i had.
View 1 Replies
Jan 20, 2010
i wanted to refresh the gridview once user enters values and clicks update button. But its not updating. If i change my selection to pop up gridview, then it is showing the updated values. I dont know where i am doing wrong. can any one suggest changes in my code?
[Code]....
View 2 Replies
Jun 26, 2010
I'm working on a project where I have to create a page that displays the "health" of a system. I run a query and display the results in a gridview with a red or green icon next to it. This works fine when the page is first loaded. My problem is that I have a thread that runs a query every 30 minutes and rebinds the gridview but the gridview never refreshes even though the data has changed. How do I get the gridview to display the new results? The databound event never fires a second time even though I can clearly see that I have received new data. I assume I am missing something simple but I just don't know what. What am I doing wrong?
View 5 Replies
Nov 13, 2010
I have 2 gridviews in a page. After update of gridview 1, I want it to refresh the second gridview,
View 3 Replies
Nov 27, 2010
I am using a Gridview inside an UpdatePanel. I am using the RowCommand method to call my code to delete the record. The gridview is bound to a <list> collection. I am unable to get the Gridview to postback / refresh after the users deletes a record; however, if I refresh the page in the browser and the page loads, it obviously is gone. I have searched quite a bit on this where others are having problems but nothing they did work for me, so I was hoping someone could review my code and let me know what I am doing wrong.
Here is my ASPX:
[Code]....
Here is my C#
[Code]....
When I step through the code, the postback happens and then my delete code is called, so once the delete code happens, the page is already finished loading, which seems to be my problem.
View 2 Replies
Mar 4, 2011
I am new to asp.net development and I have a employee Web form that is part of a larger wesite. The webform uses a Gridview control which receives data via SQL Server tables so the web form has a SqlDataSource ID="SqlDataSource1" defined. When the page loads, the connection string automatically populates the rows of the gridview (which is a all employees).
I am attempting to create a customized sub search wherein the user can reduce the search to one person by providing either firstname or lastname, department etc within a textbox and then selecting the same from a dropdown list. Finally the user clicks the submit button (which is onclick in codebehind).
When I try to do the above I get "System.InvalidOperationException: Both DataSource and DataSourceID are defined on 'GridView1'. Remove one definition." It seems that once I define the DataSource and DataSourceID in the form, it is illegal for me to do it again in the codebehind. Is there a way to refresh the Gridview that I already have with code from a button_click. I have code attached.
[Code]....
View 3 Replies
Mar 7, 2010
I have two gridviews tied to a SQL backend both being displayed within an update panel. Both the gridviews have a linkbutton connected to a rowcommand. When clicking on one of the rowcommand link buttons, the database is updated and the update panel is refreshed (moving the record to be displayed in the other gridview in the panel). However, when the rowcommand from the other gridview is clicked, the code is run and the database is updated, but the update panel is NOT refreshed.I have debugged it and have found that the code is running as expected. It fires off the function and updates the database. If I click away from the page and then go back, it does show the data in the proper gridviews, so I know that the code is working.
View 3 Replies
Mar 23, 2011
I am not sure why this is happening, but when I drop a GridView on the page and set up the SqlDataSource to point to a stored procedure - when I go to refresh the schema and add my session variable, I get an "Invalid object name #temp_table_Name" I have the appropriate read permissions on the tempdb. The user and password info are correct. The temp table is created in the stored procedure before executing the query.
View 7 Replies
Sep 13, 2010
I have a Gridview that shows my data, I allowed it to have Editing and Sorting. I have achieved refreshing my GV with <META HTTP-EQUIV="Refresh" CONTENT="15">. however, when I Edit and it hits the time to refresh, I loose the Edit mode and starts at the beginning of the grid (I need to find the data again.) Is it possible to still have the refresh (15secs) then when Iam in EditMode, the Refresh stops, then after I have clicked UPDATE. the refresh time starts to count again. (i use VB)
View 7 Replies
Jul 11, 2010
I am working on a Webbased project, where we have a Master page with some child page. In the child page there is GridView control, Footer of this Gridview control have some TextBox control to get the input value from user and insert into database. Once the data is inserted into database. We are reloading the inserted data into the same Gridview control, But Gridview control is hot Binding/showing up the recently added record.
I debugged the code and seen the Dataset which is getting the data fron database have the updated row but after binding to Gridview control. The Gridview control not refreshing the data. This is happening while we have Master page and child page.
View 7 Replies
Dec 15, 2010
I have a page with lots of panels on it. Some of the panels are user controls and some are just on the page. I have a form on the page where you can add users and a gridview which is a user control showing a list of users.When a new user is added on the form I want to do gridview.databind() for the gridview in the user control. Does anyone know how to do this?
View 3 Replies
Sep 17, 2012
I am refreshing my gridview every 10 sec using update panel and Timer control.
In timer control i have:
protected void Timer1_Tick(object sender, EventArgs e){gv1.DataBind();}
Now i have a checkbox column in the gridview, and select all checkbox also, for functionality of checkboxes i am using javascript like what is explained by this article: [URL] ....
I like this way its simple and fast. but now when gridview refreshes the checkbox selection and others styles disappears.
Now what can i do to keep my selection as it is on gridview refresh. Do i have to stop the gridview refresh on checkbox selection?
View 1 Replies
Aug 4, 2010
I have bounded Gridview through Wizard. It's working fine. but i want that if i add new data it should be visible in the gridview. But gridview not refreshing. I know i can perform this programmatically . but i want to do it in this case also.
View 1 Replies
Mar 11, 2010
I'm using telerik radgrid with some record rows , after updates one row from grid,where dispaly only that row.After click refresh button,all the records are view.
View 2 Replies
Sep 22, 2010
I have a datalist. When a user clicks a button in the datalist I change some properties and then want to refresh the datalist. However, the code below doesnt seem to refresh the datalist. Once I reload the entire page (which I dont want) the changes are visible in the datalist. I also tried setting the updatemode of the updatepanel to "Conditional" and update manually in the dlPhotos_ItemCommand, but that doesnt work either.
In bold I've marked where I want to refresh the datalist
<asp:UpdatePanel ID="upnlPhotos" runat="server">
<ContentTemplate>
<cc1:AsyncFileUpload ID="afuPhoto" runat="server" />
<asp:DataList ID="dlPhotos" DataSourceID="dsPhotos" DataKeyField="id" RepeatColumns="5" RepeatDirection="Horizontal" GridLines="None" runat="server" >
[Code].....
View 6 Replies
Nov 12, 2010
have a grid view attached with a select -> Details viewwhen i update a row, it does update in the database but doesnt refresh the gridview to show what it shouldive attached my code on my aspx if its any use
[Code]....
View 2 Replies
Jul 17, 2015
I have repeater control on page which bind with sql data source.i have dropdown to filter the records of repeater on button click event it refresh complete page i just want to show a wait message to user and just refresh repeater data instead of complete page refresh.i do not want to use ajax update panel.
View 1 Replies
Sep 8, 2010
I have a simple page, 2 textboxes & 1 button, wherein when button is clicked the values in both textboxes are added to a database table. code works however, when button is clicked the values are still in the textboxes. I created txt1.text = vbnullstring & txt2.text = vbnullstring after Myconnection.Close() just to delete the values in the textboxes.
but when I try to refresh my page, The values are still added to my table. I could redirect to a new page after a successful entry but, I just what to add a label saying "New Entry Added", clear the textboxes and waits for a new entry.
View 4 Replies
Jul 20, 2010
Kindly let me know why my appln redirects me to Session TimeOut page on a simple postback. This doesnot happen on my local pc but happens only on prod. Here is the code I m using on my PageBase.cs 's Init method
[Code]....
And in my web.config:
<authentication mode="Forms">
<forms name=".MY-AUTHPORTALNAME"
slidingExpiration="true"
defaultUrl="Default.aspx"
loginUrl="Login.aspx"
protection="All"
timeout="9999"
path="/"/>
</authentication>
<sessionState mode="InProc" cookieless="false" timeout="9999" />
View 2 Replies
Jan 11, 2010
How to display empty GridView to insert new record if no data retreived for some record on the result from data table?Actually i am trying to give a user an option to add recrod from Gridview. On result of some query it is perfectly displaying data and a footer row with the insertion textbox but when there is no data in the gridview it is not displaying. It should display with footer having insert textbox.
View 5 Replies
Jul 31, 2010
I am unable to access the data in the gridview's selected row. I have done this lots of times but must be forgetting something.
Here is my gridview:
[Code]....
[Code]....
[Code]....
View 4 Replies
Apr 7, 2010
I have loaded up a gridview object with data. I have turned on Edit on the grid. It lets me edit the data, but I also want to put some code to check for correct data in each field. I tried to assign a requiredfieldvalitor, comparevaliditor but they don't work. Is there an event I can capture to fire up some code before the grid sves my data?
View 3 Replies
