Want To Add New Data, It Should Be Visible - Gridview Not Refreshing
Aug 4, 2010
I have bounded Gridview through Wizard. It's working fine. but i want that if i add new data it should be visible in the gridview. But gridview not refreshing. I know i can perform this programmatically . but i want to do it in this case also.
View 1 Replies
Similar Messages:
May 20, 2010
I have a gridview that is bound to a SQL datasource and is filtered via FilterExpression,
the FilterExpressoin is using Contro Parameters in a for of textboxes.
I want a certain button to become visible (btnInsert.Visible=true) when the filterExpression returns no results.
what event should I use? what is the code for that?
View 3 Replies
May 14, 2010
I have a very strange problem here I am using a GridView which shows nothing the the page loads for the first time. But when user selects something from the dropdown above, it DataBind()s against whatever is returned by the stored procedure.
If ran the code in debug mode, it showed that gvMyGrid.Datasource had data in the list returned by SP.Then I did gvMyGrid.DataBind(), it keeps the same empty view.I tried one more thing, I bound the grid when the page loads for the first time to one of the default values returned. It showed the data but when I changed the dropdown selection, it kept the same data.
View 2 Replies
Jan 17, 2010
I have a customized gridvew i.e. grvResult. There is a textbox and a InsertButton in the footer.
If there is a data populated into gridview it is showing GridView footer and inserting data but if there is no data in gridview then its footer also not visible.
I have tried in two ways to make footer visible but it is showing following error:
Object reference not set to an instance of an object.
Tried ways:
[Code]....
[Code]....
View 2 Replies
Oct 2, 2010
I am trying to update my count value in gridview once i have click on my link my count value is updated, i am already do this using javascript and also i hv do this change in database and get the proper responce of that.
But i want to do that without refreshing page or gird my count value is increase which is i had.
View 1 Replies
Jan 20, 2010
i wanted to refresh the gridview once user enters values and clicks update button. But its not updating. If i change my selection to pop up gridview, then it is showing the updated values. I dont know where i am doing wrong. can any one suggest changes in my code?
[Code]....
View 2 Replies
Jun 26, 2010
I'm working on a project where I have to create a page that displays the "health" of a system. I run a query and display the results in a gridview with a red or green icon next to it. This works fine when the page is first loaded. My problem is that I have a thread that runs a query every 30 minutes and rebinds the gridview but the gridview never refreshes even though the data has changed. How do I get the gridview to display the new results? The databound event never fires a second time even though I can clearly see that I have received new data. I assume I am missing something simple but I just don't know what. What am I doing wrong?
View 5 Replies
Nov 13, 2010
I have 2 gridviews in a page. After update of gridview 1, I want it to refresh the second gridview,
View 3 Replies
Apr 20, 2010
I am just trying to view gridview that is inside other gridview but it is not visible although its visible = trure.
Here is the code:
[Code]....
View 10 Replies
Nov 21, 2010
On my aspx page I use a popupmodalextender to show (and edit) some data that is contained in a gridview (gridview is on the same page). Popup works OK and also the editing of the data, but when I close the popup (from code behind) the data in the gridview is not refreshed.
Aspx:
[Code]....
Code behind:
[Code]....
Why doesn't databind() work until I refresh the page?
View 16 Replies
Jan 3, 2011
I am trying to implement a GridView. This GridView needs to allow users to read and update data from a single table. The data in the GridView is the population for a city/state. Please note the use of the DISTINCT as some cities in a state have multiple postal codes. Regardless, to edit this information, I'm trying to use the following GridView:
[Code]....
The information is displayed as I would expect. My problem is with editing. When I click the "edit" link, a TextBox associated with the population is displayed as expected. When I click "update" though, my change fails to persist. I fired up SQL Profiler and found that the data in the Grid is being refreshed before the UPDATE statement is being sent. Because of this, the original value is being sent. what am I doing wrong? I just need to update the Population value of the cities with the value entered by a user.
View 7 Replies
Nov 27, 2010
I am using a Gridview inside an UpdatePanel. I am using the RowCommand method to call my code to delete the record. The gridview is bound to a <list> collection. I am unable to get the Gridview to postback / refresh after the users deletes a record; however, if I refresh the page in the browser and the page loads, it obviously is gone. I have searched quite a bit on this where others are having problems but nothing they did work for me, so I was hoping someone could review my code and let me know what I am doing wrong.
Here is my ASPX:
[Code]....
Here is my C#
[Code]....
When I step through the code, the postback happens and then my delete code is called, so once the delete code happens, the page is already finished loading, which seems to be my problem.
View 2 Replies
Mar 4, 2011
I am new to asp.net development and I have a employee Web form that is part of a larger wesite. The webform uses a Gridview control which receives data via SQL Server tables so the web form has a SqlDataSource ID="SqlDataSource1" defined. When the page loads, the connection string automatically populates the rows of the gridview (which is a all employees).
I am attempting to create a customized sub search wherein the user can reduce the search to one person by providing either firstname or lastname, department etc within a textbox and then selecting the same from a dropdown list. Finally the user clicks the submit button (which is onclick in codebehind).
When I try to do the above I get "System.InvalidOperationException: Both DataSource and DataSourceID are defined on 'GridView1'. Remove one definition." It seems that once I define the DataSource and DataSourceID in the form, it is illegal for me to do it again in the codebehind. Is there a way to refresh the Gridview that I already have with code from a button_click. I have code attached.
[Code]....
View 3 Replies
Mar 7, 2010
I have two gridviews tied to a SQL backend both being displayed within an update panel. Both the gridviews have a linkbutton connected to a rowcommand. When clicking on one of the rowcommand link buttons, the database is updated and the update panel is refreshed (moving the record to be displayed in the other gridview in the panel). However, when the rowcommand from the other gridview is clicked, the code is run and the database is updated, but the update panel is NOT refreshed.I have debugged it and have found that the code is running as expected. It fires off the function and updates the database. If I click away from the page and then go back, it does show the data in the proper gridviews, so I know that the code is working.
View 3 Replies
Mar 23, 2011
I am not sure why this is happening, but when I drop a GridView on the page and set up the SqlDataSource to point to a stored procedure - when I go to refresh the schema and add my session variable, I get an "Invalid object name #temp_table_Name" I have the appropriate read permissions on the tempdb. The user and password info are correct. The temp table is created in the stored procedure before executing the query.
View 7 Replies
Sep 13, 2010
I have a Gridview that shows my data, I allowed it to have Editing and Sorting. I have achieved refreshing my GV with <META HTTP-EQUIV="Refresh" CONTENT="15">. however, when I Edit and it hits the time to refresh, I loose the Edit mode and starts at the beginning of the grid (I need to find the data again.) Is it possible to still have the refresh (15secs) then when Iam in EditMode, the Refresh stops, then after I have clicked UPDATE. the refresh time starts to count again. (i use VB)
View 7 Replies
Jul 11, 2010
I am working on a Webbased project, where we have a Master page with some child page. In the child page there is GridView control, Footer of this Gridview control have some TextBox control to get the input value from user and insert into database. Once the data is inserted into database. We are reloading the inserted data into the same Gridview control, But Gridview control is hot Binding/showing up the recently added record.
I debugged the code and seen the Dataset which is getting the data fron database have the updated row but after binding to Gridview control. The Gridview control not refreshing the data. This is happening while we have Master page and child page.
View 7 Replies
Dec 15, 2010
I have a page with lots of panels on it. Some of the panels are user controls and some are just on the page. I have a form on the page where you can add users and a gridview which is a user control showing a list of users.When a new user is added on the form I want to do gridview.databind() for the gridview in the user control. Does anyone know how to do this?
View 3 Replies
Sep 17, 2012
I am refreshing my gridview every 10 sec using update panel and Timer control.
In timer control i have:
protected void Timer1_Tick(object sender, EventArgs e){gv1.DataBind();}
Now i have a checkbox column in the gridview, and select all checkbox also, for functionality of checkboxes i am using javascript like what is explained by this article: [URL] ....
I like this way its simple and fast. but now when gridview refreshes the checkbox selection and others styles disappears.
Now what can i do to keep my selection as it is on gridview refresh. Do i have to stop the gridview refresh on checkbox selection?
View 1 Replies
May 7, 2015
I am using gridview with sqldatasource , now i have a column
<asp:gridview ID="MyGrid" runat="server" AutoGenerateColumns="False" datakeynames="Seq"
DataSourceID="ExistingConsPhaseSource" >
<Columns>
<asp:boundfield datafield="Seq" headertext="Seq" readonly="True" Visible="False" sortexpression="Seq" />
<asp:templatefield headertext="Description" sortexpression="Description">
[Code] ....
I also have a button outside gridview , on its click event i want to delete all rows in a grid view. So far i have done like this :
protected void DelAllExisting_OnClick(object sender, EventArgs e) {
foreach (GridViewRow row in ExistingConsPhases.Rows) {
string query =
"UPDATE [dbo].[myTable] SET IsDeleted = 1, DeletedBy = @DeletedBy, DeletedDate = GETDATE(), DeletedByPrefix = @DelPrefix WHERE Seq = @Seq";
SqlCommand comm = new SqlCommand(query,_connection);
comm.Parameters.AddWithValue("@Seq", ???);
comm.ExecuteNonQuery();
_connection.Close();
}
}
What to type instead of ??? I want my bound field of Seq to be place here ? how ?
View 1 Replies
Dec 14, 2010
I have a master/detail page using a gridview as the master, and a detailsview as the details. The gridview is set to select a record, and the detailsview picks up the ID and you can either edit that record, or add a new one.The detailsview is set up with various template fields, and if everything on the page is visible, it works OK.However, I wanted to hide the Gridview when the user in working with the detailsview. But if I do that, the detailsview doesn't update the record.
View 2 Replies
Oct 8, 2010
i have a gridview inside a div that has scrollbars. see bellow
[Code]....
is there a way to keep the gridview header always visible while scrolling down.
like in MS Excel.
View 2 Replies
Mar 2, 2010
I am able to get the values of GridView cells when the columns are not visible.
For Example:
<asp:BoundField DataField="TemplateKey" Visible="false"/>
foreach (GridViewRow gvrow in GridView1.Rows)
{
gvrow.Cells[0].Text.ToString()
}
But if I make the BiundFiled Visible="true" then I get the value in the code behind.
I do not want to show this value to the user and also want to get the value in the code behind. How can I do that?
View 2 Replies
Jun 24, 2010
Whenever you turn off the visibility of a column in Gridview, on Edit, the value becomes null because its never bound. The only way I know of stopping this behavoir is to put it in the DataKeyName list. Is there any other way to prevent this? I have quite a few columns that will not be displayed in this "release" but I want there for future extensibility. Also, in some cases these values will be used for calculations but the user should not see them. Is there no toggle property for "non-visible" items to remain "unchanged" or something of the sort?
View 3 Replies
Oct 20, 2010
Using vb.net/asp.net 2005.
I have an Outer gridview (called grdvOUTERGRIDVIEW) and an Inner Gridview (called grdvOUTERGRIDVIEW) and I am able to see and use the outer gridview in my codep-behind vb page however when I try to handle an event for the Inner gridview then I get the warning: "handles clause requires a withevents variable defined in the containing type or one of its base types".
After creating the inner gridview I closed the page out and re-opened it however still getting that error and not able to create the grdvINNERGRIDVIEW.RowDataBound event function like I am trying to do.
the gridviews are below:
[Code]....
View 4 Replies