I have following codebehind in ASPx - VB.Net in my aspx project, i want sum a template column (txtAmount) to show another TXSum template (without any postback) any one give me a better soluation in javascript.
My Code:
[code]....
I have 5 gridviews, all of of them have a Checkbox template field. I already did SUM of a specific column in the gridviews and displayed the Total in the gridview footers.
There is a submit button on the page as well.(this is not in a template column in the gridview)
what i do is select some rows in the gridviews by ticking the checkbox. Then I click on the submit button and the values change in the database and page refreshes with the new Total in the gridview footers. Any row that was ticked. the checkbox for that row in the gridview gets disabled. so cannot change the value again.
Now i want a way to show a popup with a SUM of those rows that are ticked recently and the SUM of already ticked and disabled rows before the values change for the ticked rows in the gridview when the submit button is clicked.
i am implementing a update query module.i am displaying all fields from a table for a term searched. well now i am implementing update option for the record which are displayed, i have like 70 columns in my table, and i want to know how to restrict some selected fields to be only read only while the form can be updated ?Like if user select to update a record then some selected field such as "Timestamp, UID etc some selected fields" remains READ ONLY !
View 1 RepliesThe above is my gridview item template, I have used this javascript for row total
[Code]....
gridview row databound code behind
[Code]....
The above code is getting row calaculated on key up. With the same code in need column total also. I need total of column quantity and total in their respective footer textbox.
Setting up the editItem template of a gridview. I have a template field with a dropdown list for editing. When the gridview goes into edit mode the dropdown list is displayed with all the right options but the current value of the field (pre-editing) is not the selected value of the dropdown list? How do I make that happen? I have a couple fields where the editItem template will use a dropdown list and I'm sure a user will not realize those values have changed and they will just edit what they intended to edit and save the changes, inadvertently also making changes to other fields.
View 3 RepliesI'm trying to figure out what I'm doing wrong with my code. If I use the code below in a non-masterpage aspx page with <head><body><div> tags it works with no problem. Code that works:
[Code]....
I am using a asp link button in grid template field which calls a pop up,i need to find the link button's control in cs page.my link button code
<asp:LinkButton
runat="server"
ID="hlQName"
Text='<%# Eval("QuestionnaireName")%>'
OnClientClick="javascript:window.open('frmAssignQuestionnaire.aspx?Proj=<%#Eval("ProjectID")%>&ques=<%#
Eval("QuestionnaireName")%>+','','left=250px, top=245px, width=700px, height=450px, scrollbars=no, status=no, resizable=no');return false;"></asp:LinkButton>
now i am getting server tag is not well formed error,i tried removing the quotes within eval but then i didnt get parameter values in java script.
i have a gridview as follows,
<asp:GridView runat="server" ID="gvPO" AutoGenerateColumns="False" >
<Columns>
<asp:TemplateField HeaderText="PO No."><ItemTemplate>
<asp:LinkButton ID="lnkPo" runat="server" Text='<%#Eval("Purchase_order_no") %>' ></asp:LinkButton>
</ItemTemplate></asp:TemplateField>
</Columns>
</asp:GridView>
The linbutton shows Purchase_order_no. When i clicked on a paricular purchase_order_no., it will navigate to another page with a gridview that shows details of that particular Purchase_order_no...
I have a Linkbutton on a Gridview which has got the below RowDataBound:
[Code]....
The above javascript will close the page automatiically. My intent is to close the page after the Link in the template field is clicked, but here the page closes automatically when its loaded.
I have a gridview, whose columns I am dynamically binding. There are two fixed columns, one is a button field and another is a template field containing an image. The other columns might vary in number and behaviour, so before binding the grid, I am removing all columns of the gridview except the button field and the template field. But after doing this, if i try to do a findcontrol for the template field(Image column), it is notgetting the control. Means while removing the other columns, this image control also getting removed.Below is my code:
[Code]....
Now, after this i call the databind method. The problem is with the for loop, where I am removing the columns after the image column. And I am not able to find the control after that.In rowdatabound i am trying to find the control like this:
[Code]....
When I change my insert update and delete buttons to template field....they do not work properly anymore. I get a "Cannot insert a Null Value into...blah blah blah, error.
View 2 Replies[Code]....
This is my Grid view source basically i want as soon as i click on Select Button , the corrsponding Row Data get's redirected to another Page with the Data I know how to redirect to another page with query string only thing is that where and how i can store the data my .cs source
[Code]....
i have a grid with template feild with two button's Accept and Deny and Command Name="update" and command argument ="Accept" and command argument2="Deny" now the problem is everytime when i click any Button it gives me first row data see my source
[Code]....
My Code Behind
[Code]....
Image [URL]
I have a gridview where I am using the update. I have converted the label into a templatefield and added a dropdownlist which is getting polulated in the Rowdatabound event. When I test the update i get an error
Cannot insert the value NULL into column 'StartTime', table 'HTC.dbo.EventDates'; column does not allow nulls. UPDATE fails.The statement has been terminated. so I am ussuming its still trying to update from the label rather than using the dropdownlist. here is my code:
[Code]....
I have a gridview control set up like so:
[Code]....
I am using an IComparer to do the sorting of the gridview and binding it to a list of objects. It used to be that the linkbutton in the first template field was being done like this:
[Code]....
The sorting worked just fine when it was like this, but I would prefer not to use a querystring value. The problem with using the linkbutton is that the sorting appears to work (there are only two rows in my test case and they change places), but when the linkbutton is clicked on it is in the same order before the sort took place. After each sort the gridview's datasource is reset to the newly sorted list of objects and the databind method is called.
I have a gridview and basically at page load I want it to display with an empty row. The first field in the gridview would be a template field containing a textbox. I wan't to be able to type in, for example, a product code ('abc'). This would be the parameter for the stored procedure and then the rest of the columns (40+ additional columns) in the gridview would populate with the rest of the data pertaining to that product code (i.e. price, unit of measure, etc.). In short the template field texbox is the control to bind the gridview.
After the row is populated I could click a button or link that would add that entire row to my gridview and then add another empty row where I could enter another product code... populate the row then add that row to the gridview. and so on...
I have a GridView that is bound to a DataTable containing questions. Each question has a possible score of 1 to 9 which is handled by a Template Field with a RadioButtonList databound to another DataTable (containing the values 1 to 9). This all works fine except as an added complication, some of the questions have an extra choice in another field. So the problem is how do I bind the second Template Field to a datasource that is dependent on the question. It's like passing a parameter to the datasource of the second Template Field, the value of the parameter being the Key Field of the particular row. Is this possible and if so, how do I do it
View 2 Replieshow can i align text in gridview template feild.already test ItemStyle-HorizontalAlign="Right"
but not working..
I have a asp:button in template field of gridview, I set command name for this and in grid I mention on command event. On clicking the page it shows error message is :
Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
Below is my code
<asp:GridView runat="server" ID="gridManageClients" AutoGenerateColumns="False" OnRowCommand="gridRowCommand">
<Columns>
<asp:BoundField DataField="Clientid" ItemStyle-Width="75px" />
<asp:BoundField DataField="ClientName" ItemStyle-Width="300px" /> [code]...
is there a way to show or hide a Template Field within a gridview upon a condition in C#?
View 2 RepliesI'm trying to remove a GridView Row if the user has checked a checkbox in that
[Code]....
row (the checkbox is in a template field), but I'm unable to actually remove that row from the GridView. Here's what I have, I think I'm getting the row index incorrectly...
OnSelectedIndexChanged event for the dropdown is the fired.
I have set the autopost back value = "true", EnableViewState ="true" for page tag and gridview tag.
I have an application that I would like to be able to allow the user to modify multiple characteristics of each record within a datagrid.
Most characteristics require data to be entered in a text box but some a check box would be more appropriate.
My question is does a gridview column need to have all the same item template controls? or could I read from the database the control type and dynamically alter the template control for each row as it loads?
This is what I have - it works:
<asp:GridView ID="GridView10" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource10"
<asp:TemplateField HeaderText="File Photo" SortExpression="Pic_Number">
<ItemTemplate>
<asp:Image ID="Image1" runat="server" ImageUrl='<%# (Eval("Pic_Number", "http://.../images/{0}.jpg")) %>' />
</ItemTemplate>
</asp:TemplateField>
<asp:BoundField DataField="Item_Count" HeaderText="Stock" SortExpression="Item_Count" InsertVisible="False" ReadOnly="True" >
Conceptually what I want: (item count is a BoundField called in the GridView )
<asp:GridView ID="GridView10" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource10"
<asp:TemplateField HeaderText="File Photo" SortExpression="Pic_Number">
<ItemTemplate>
( IF "Item_Count" > 50 )
<asp:Image ID="Image1" runat="server" ImageUrl='<%# (Eval("Pic_Number", "http://.../images/{0}.jpg")) %>' />
( IF "Item_Count" < 50 )
onmouseout : <asp:Image ID="Image1" runat="server" ImageUrl='<%# (Eval("Pic_Number", "http://.../images/StockLow.jpg")) %>' />
onmouseover: <asp:Image ID="Image1" runat="server" ImageUrl='<%# (Eval("Pic_Number", "http://.../images/{0}.jpg")) %>' />
</ItemTemplate>
</asp:TemplateField>
<asp:BoundField DataField="Item_Count" HeaderText="Stock" SortExpression="Item_Count" InsertVisible="False" ReadOnly="True" >
I am trying to grab the UID of each row on botton click. However in my code behind I am only able to get the first row.
[Code]....
I am brand new to programing and to ASP.net and I have a feeling I am really close to getting this.