- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 RepliesI have a page where I have a tab container and four tabs. the problem is on the first tab "manage quote request" I have a Gridview with the quote request general informatin listed and have a template field created with a link button to databind to the formview quote details. the porblem comes in when after I click on the select linkbutton. the Formview loads right. Then Whe I try to click on the edit linkbuttin in the form view I have to click it twice to change the mode to edit.
here is the page code:
[Code]....
Here is the Codebehind:
[Code]....
VWD 2008 Express. Visual Basic. I have a gridview that displays the grade records of students in a class. I am only able to select one row at a time to edit (using the "Edit" button for that row, followed by "Update" when I am finished. I would like to turn on edit for all rows at the same time or for a group of rows and then have one "Update" button to press when I am done with all editing, much as in a spreadsheet where you are not restricted to a single row before you press "Save."
View 5 RepliesI have the need to allow a user to "tab through" making edits on a gridview. There will be one editable column in the row data. The user should be able to hit tab and go to the next row to edit said column. I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time.
reviewTransferGV.EditIndex = 0;
reviewTransferGV.Rows[0].RowState = DataControlRowState.Edit;
reviewTransferGV.EditIndex = 1;
reviewTransferGV.Rows[1].RowState = DataControlRowState.Edit;
reviewTransferGV.DataBind();
How can I set a particular row into edit mode in code? Like when the Grid loads up I need the last row to be in Edit mode.
View 3 RepliesI have a gridview and a template column:
<asp:TemplateField HeaderText="Active">
<EditItemTemplate>
<asp:CheckBox ID="chkbxActive" runat="server" Checked ='<%# Bind("Active") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:Label ID="lblActive" runat="server" Text='<%# Bind("Active") %>'></asp:Label>
</ItemTemplate>
</asp:TemplateField>
The item "Active" is a bit from the database And for the RowDataBound:
Const HeavyCheckMark As Char = ChrW(&H2714)
For Each row As GridViewRow In gvProductCodes.Rows
If gvProductCodes.EditIndex = -1 Then
' Selects the text from the Label which is inside the GridView control
Dim lblActive As String = CType(row.FindControl("lblActive"), Label).Text
lblActive = lblActive.Replace("True", HeavyCheckMark)
lblActive = lblActive.Replace("False", "")
'Replaces the text in each Label control
CType(row.FindControl("lblActive"), Label).Text = lblActive
Else
Dim chkbx As CheckBox = CType(row.FindControl("chkbxActive"), CheckBox)
End If
The check mark works fine when not in edit mode. But when in edit mode, the row that is being edited works as expected. But the other rows now show True or False. I want them to have the const HeavyCheckMark in it instead.
I have a dynamically built gridview in which every row in editing mode has 2 dropDownLists, i set autoPostBack property of first list to true in order to change the other list values according to the first, but upon postBack, the gridview is not in edit mode any more.
View 7 RepliesI have a webform with two gridviews; a textbox for the invoice number, and a button to kick everything into action. I programmatically handle the select statements in the VB.Net file because I need to iterate through the second gridview's table to perform calculations and then put those results into the first gridview's table. Then I bind them. It works just fine.
The first gridview has one row with the payment information. The second gridview has multiple rows with the items that the payment is handling.Now I need to handle the edit, update and cancel functionality. I tried using a sqlDataSource for edit, update and cancel because it is simple, but it requires a Select statement so I guess that idea is not going to happen. I put a commandField with showeditfield=true, but clicking edit gives an error that rowEdit isn't handled. I have put that sub gvInvoice_RowEditing in there, but being new at this I have no idea what to put into that sub.
I can programmatically create all that functionality in the code behind. Won't it be quicker and easier if I write sub's for Edit, Update and Cancel that tell the gridview what to do - trick it to automatically handle all that? Is there an example available demonstrating how to tell the gridview to go into edit mode and proceed as if it was using a sqlDataSource?As a final note: perhaps it would be simpler if I create a third gridview to handle the job of totaling all the cash and listing each check seperately.Here is my code. It probably isn't the most elegant approach, but it works.
[Code]....
I have a gridview placed on the Panel(Scrollbars set to Both).
If I click on Edit button of the gridview for example Row number 100 then the focus of the page goes to the top of page and I always scroll down to the particular record to make changes.
I have a grid view. When I click edit, the OnRowCommand fires and the row goes into edit state. Label becomes a TextBox. I then attempt to alter this value in some way and click update. This again fires the OnRowCommand event. The problem is, when I attempt to capture the new value, it instead just shows the original value.In my grid view I have:
<asp:TemplateField
HeaderText="Start Name">
<ItemTemplate>
<asp:Label
ID="lblStartName"
runat="server"
Text='<%#Bind("StartName")%>'></asp:Label>
</ItemTemplate>
<EditItemTemplate>
<asp:TextBox
ID="txtStartName"
runat="server"
Text='<%#Bind("StartName") %>'></asp:TextBox>
</EditItemTemplate>
</asp:TemplateField>
In my code behinde i have
TextBox
textBox = (TextBox)row.Cells[4].FindControl("txtStartName");
For the life of me I can't figure out why I can't put my gridview in edit mode. I am using an ObjectDataSource, maybe that has something to do with it. The problem is that the gridview won't go into edit mode when the edit is pushed. Here is some of my code:
ObjectDataSource:
[Code]....
GridView:
[Code]....
I will troubleshoot my Match class methods after I get the gridview edit mode working.
Is there a way to update a value in a gridview, by pressing a button that shows within the cell? For example, i have a really simple gridview showing supply levels, I havr the following SQL table:
ID = Int
PartNumber = varchar
Quantity = Int
I would like to be able to press a "Plus" or "Minus" button on the gridview next to the Quantity (in stock) value which updates the database and re binds the data to the gridview, but without going into edit mode.
I have a gridview with a edit button for each row. Selecting an edit button changes the row to Edit mode. When in Edit mode, the row ID's are not being captured correctly. Any row I select defaults to one of the first 2 rows I had selected earlier.If I first select Row 1, it puts that in edit mode. When I "Cancel" out of it, row 2 goes into Edit mode. Now, when I select row 3, row 1 goes into edit mode again. From this point, any row I select puts either row 1 or 2 into select mode.
View 3 Repliesto get value from the edit mode form the gridview row command
protected void grdcalib_RowCommand(object sender, GridViewCommandEventArgs e)
{
string prd;
GridViewRow rw= (GridViewRow)(((Button)e.CommandSource).NamingContainer) ;
if (e.CommandName == "Edit")
{
}
else if (e.CommandName == "Update")
{
Label12.Text = (TextBox)rw.FindControl("txteditgoupp").ToString() ;//i got the error
I have a Members table with the following fields: LastName, FirstName, Address, CityID, ProvinceID, PostalCode.
I have added another field for the MemberTitleID.
During the Gridview Edit mode, I am trying to enable setting the MemberTitle using a drop-down list as shown below:
[Code]....
When I added the new field MemberTitleID in the Members Table, all of them were left un-initialized.
Here is the error I get when I click the edit button on the grid view :
[Code]....
[Code]....
I have several places where I have a gridview and dataview set, and when I hit an edit button on the gridview it opens up the dataview. When I hit a cancel button fom the dataview I have this code that returns mew to the gridview:
dvwUser.ChangeMode(DetailsViewMode.Insert);
In my gridview, I have a column for Amount. I want to calculate the amount as soon as user changes the Amount and display calculated Amount in a textfield. What I have done is I have Amount as Templatefield and have set Autopostback = true. In the event handler for textChanged I have function for calculate Amount which will calculate the amount and set the calculated value in a textbox. But I am getting an error message:
[NullReferenceException: Object reference not set to an instance of an object.]
UpdateInvoice.calculateamt() +87
UpdateInvoice.txtAmt_TextChanged(Object sender, EventArgs e) +5
System.Web.UI.WebControls.TextBox.OnTextChanged(EventArgs e) +8739438
System.Web.UI.WebControls.TextBox.RaisePostDataChangedEvent() +55
System.Web.UI.WebControls.TextBox.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +10
System.Web.UI.Page.RaiseChangedEvents() +165
I have a gridview that I would like to the set the textbox in edit mode to multi line in order to show more of the content of the cell. Does anyone know how to change this property, I have tried (I think) every single one I could find in the Gridview property settings for editstyle, item style, row style etc.
View 5 RepliesI have gridview that has month as a column. When the user clicks a row's edit button, that row goes into edit mode. I have created a drop-down list for month in edit mode with the values 1-12. Right now, the drop-down list shows 1. I would like it to show the current value for that row. How do I do this? Here's the code for my gridview:
[Code]....
Here's some applicable code from the code behind:
[Code]....
I am working with VWD Express and Visual Basic. take this into consideration if you are willing to answer my question. I do have the following code for a GridView.
<asp:GridView
ID="OpenCloseUDTIGameThreadGridView"
runat="server"
AllowPaging="True"
AutoGenerateColumns="False"
DataKeyNames="AutoNumber"
DataSourceID="OpenCloseUDTIGameThreadSqlDataSource"
CellPadding="4"
ForeColor="#333333"
PageSize="100" >
<Columns>
<asp:TemplateField HeaderText="Picture">
<ItemTemplate>
<asp:ImageButton
ID="ThumbNailImageButton"
runat="server"
Width="75px"
PostBackUrl='<%# string.Concat("~/Classifieds/DetailPage.aspx?AutoNumber=",Convert.ToString(Eval("AutoNumber")),"&FlagForm=NoSubmitted") %>'
ImageUrl='<%# IIF(System.IO.File.Exists(Server.MapPath(string.Format("~/UploadedImagesClassifieds/{0}{1}", Eval("AutoNumber"), "Pic1.jpg"))), string.Format("~/UploadedImagesClassifieds/{0}{1}", Eval("AutoNumber"), "Pic1.jpg"), "~/UploadedImagesClassifieds/NoPicture.gif")
%>' />
</ItemTemplate>
<ItemStyle HorizontalAlign="Center" />
</asp:TemplateField>
<asp:CommandField ShowEditButton="True" />
<asp:BoundField DataField="TCategory" HeaderText="Category" ReadOnly="True" SortExpression="TCategory" />
<asp:BoundField DataField="TItemTitle" HeaderText="Item Title" SortExpression="TItemTitle" ReadOnly="True" />
<asp:BoundField DataField="TUDTIThreadActualStatus" HeaderText="Actual Status" SortExpression="TUDTIThreadActualStatus" />
</Columns>
</asp:GridView>
As you can see the second cell in each row is a EditButton, and the only cell that could be updated by users is the last one, DataField = TUDTIThreadActualStatus. I just want to know what could be the easiest way to validate the user entry when the row is in edit mode. Is there anyway to validate the textbox control with a validation control or is better to used code behind. Either way may you explain and drop some code if posible.
Is it possible to set the width of the textbox in edit mode equal to the width of the column before entering edit mode? I basically want to go into edit mode without change the size of the grid and without just setting the textbox width property to a specific number.
View 13 RepliesI have the following code in a GridView...
[Code]....
my gridview doesn't return to readonly mode after an update. i have set the editindex to -1did the databind() for the gridview too. but nothing works.setting keepineditmode to false doesn't work either.he documentation says that the gridview automatically returns to readonly after pressing the update button.my gridview is on a panel, and that panel is on an update panel.
View 6 Replies