I am working on the dynamic grid view(create dynamic columns).I need some thing like that given bellow in the fig:
columns1,2,3 are dynamic and the modules under the columns are also dynamic. to create grid like that.
Column1
Column2
Column3
Module1
Module2
Module3
Module4
Module5
Module6
Module7
Module8
I created a gridview that is made up of 4 gridviews and using a stored procedure to populate it. I create columns at runtime because the number of columns changes all the time.To make the grids editable I am adding template fields at runtime as I create the columns, this is to ensure that a user is able to edit the cells and some foot values update. Reason why I have four grids is to freeze rows and columns like in excel using javascript. The problem is that performance is very bad especially in IE, the grids take a long time to load. I am not sure if this is caused by the data load or the creation of text boxes. see some of the code below for my _aspx page:
[Code]....
I have created Grid where in Columnsname come from Database and it will be generated from a setup page where Icreate column in SQL dynamically.
Now I wanted to have an idea about these grid. How to fetch data in this grid and how toinsert data into database.
tried to use gridview.columns.count to see if there are any columns bt it shows zero, second how shall i et the names of columns in the gried view at runtime i need them to be stored in an string array
View 2 RepliesI am developing an application using ASP.NET with C#.NET.in my application i have a gridview control and radobutton list having the values as Manufacturer and Distributor. based on the radiobutton selected value,the gridview will bindedup.
i am using SQL SERVER 2005 as backend server. in my database i have one table with columns as
1.mfropendate
2.mfrclosedate
3.mfrawarddate
4.distopendate
5.distclosedate
6.distawarddate
My gridview has 3 columns as Opendate,closedate,awarddate.
if user select the radiobutton as manufacturer,only mfropendate,mfrclosedate,mfrawarddate have to bind. and if user select the distributor the remaining 3 fields will have to bind. for that i had write a storedproc as create procedure sp_GetDraftBids as begin select mfropendate as opendate,mfrclosedate as closedate,mfrawarddate as awarddate, distopendate as opendate,distclosedate closedate,distawarddate awarddate from draftbids end GO
i.e i had taken the alias names for that fields so that i will bind the only 3 columns to grid view as opendate,closedate,awarddate.
My gridview code is
[Code]....
here i had taken the same alias names as i have to bind only 3 columns to gridview.when i run my application i am getting the records in data table with column names as opendate,closedate,awarddate,opendate1,closedate1,awarddate1.i.e it does not allow the same alias name.
for two radio button conditions i.e for manufacturer and distributor the gridview binded with opendate,closedate and awarddate columns as i had binded the gridview boundfields withat names.
but when user select the distributor radiobutton i have to bind the opendate1,closedate1 and awarddate1 to the gridview. for that should i can i change the storedproc are any other solution is there?
How to resize the width of columns of grid view? I want a column 250px wide.How I can do this?
View 4 RepliesI have search for a long long time and could not find a solution to access to grid view's column properties. I have binded a grid view through this method, the bindGridView function will return a table with columns and rows.
The problem here is I cound not access to columns properties such as Grid_View.Columns.Count or Grid_View.Columns[0]."something". It seems like the grid_view does not have any column. But I can access to the Rows properties.
I have put this code within a (!IsPostBack) and set the AutoGenerateColumns to true?
I need to access to columns badly as I need t add additional column to the binded grid view.
[Code]....
I have developed my application using ASP.NET with Visual Basic. I have a table that contains 3 fields. The name of the table is "Customer" and the names of the fields are "Name", "Address", and "Amount". I have a gridview that displays these three columns. I want to summarize the value in the "Amount" column for each record and display the summarize value in the footer of the "Amount" column.
I added some code to the "ItemTemplate" and "FooterTemplate" of the template for the "Amount" field and wrote two functions One function adds the value of the "Amount" field to a variable called "TotalAmount" and the second function 'gets' the value stored in the "TotalAmount" variable.
I am not getting any error messages and all of the items are displayed in the gridview but I am not displaying anything at the bottom of the "Amount" column. What more do I need to do?
This is my code for the "Amount" template:
<asp:TemplateField
HeaderText="Amount"
SortExpression="Amount">
<EditItemTemplate>
<asp:TextBox
ID="TextBox1"
runat="server"
Text='<%# Bind("Amount") %>'></asp:TextBox>
</EditItemTemplate>
<ItemTemplate>
<asp:Label
ID="Label1"
runat="server"
Text='<%# Bind("Amount", "{0:c}") %>'>
<%#SumAmount(Eval("Amount")) %></asp:Label>
</ItemTemplate>
<FooterTemplate>
<%#GetTotalAmount() %></FooterTemplate>
<FooterStyle
BorderColor="Black"
BorderStyle="Solid"
/>
</asp:TemplateField>
This is the code in my .vp file
Dim TotalAmount as decimal 0.0
Function SumAmount(ByVal Amount
As
Decimal)
As
Decimal
TotalAmount = TotalAmount + TotalAmount
End
Function
Function GetTotalAmount()
As
Decimal
Return TotalAmount
End
Function
I have a requirement where on the left hand side we have a tree view control and on the right hand we have dynamic columns.
Below screenshot gives an idea of the requirement. what is the best way to implement this?
Year1, Year2, Year3 are dynamic and are based on the user input.
Need row editing on page_load for all the cells and need to validate each cell entry. Means cell1 one entery isvalid it fills thrid cell and insert or update to a table in the database. How do i handle on tab clicking to update in databse.
View 1 RepliesI have a condition to check weekdays with a particular time corresponding
to that day that were added to a grid view using a drop down list and two text boxes.
The drop down list has weekdays and textboxes has from and to time.
I have to verify a condition to avoid duplication of same day with same time should not occur in the table twice.
(i have used time picker jquery to get time.)
how should i write the condition in sql and use that in C#
i have a grid view with all columns as TemplateFields( No BoundField). Based on certain condition i have to set Visibility of few columns false. Suppose when there is no column 'CaseList2' in the DataTable, then the second column of the grid (whose column index is 1 )should be invisible. But when the Gridview binds it gives error DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'CaseList2'
i googled it and found that
GridView1.Columns[1].Visible = false;
should work. But its not working actualy.
Code:
[Code]....
Codebehind:
[Code]....
I have gridview control where i have added two templates one template is the dropdown box another one is the text box.
I have common controls (Edit,update,cancel)
In the form i have one button .
On click on the button one new row is created in the grid view
Now how do i fetch the data entered in the dropdown box and the textbox.
How to reload the updated data to the dropdownbox,textbox.
On edit(twice) click it is switching to Update and cancel mode
On Cancel(twice) click it is switching to Edit mode.
I want to create dynamic template field in gridview at code behind. Kindly let me know how to create this.
View 2 RepliesI am dynamically loading user controls into my main page on button event.The user control has a textbox and a gridview When i enter data in textbox , the autopostback event fires and loads data into the gridview. when i load another instance of user control and do any post back the gridview data is not persisting.Until and unless I bind the data, gridview is not having any data after postback.This is creating issue when I al updating a row in gridview as data is not persisting after postback.
View 8 Repliesi am creating gridview with dynamic template, and the grid is disappear while postback. my code is below.
i am using GridViewTemplate class to generate Templates
Public Class GridViewTemplate
i am creating gridview with dynamic template, and the grid is disappear while postback. my code is below.
i am using GridViewTemplate class to generate Templates
Public Class GridViewTemplate
Passing dynamic value to Detail view of grid through object selecting parameter
View 4 RepliesI am trying to generate a Grid view from database, in one of my database columns the values are 'y' and 'N'. and i need to show this values in a check box .I tried to keep a check box in item template and tried to bind it, but could get much success.
[Code]....
i have a grid view with some coulmns like Name,Phone no etc with Edit,Delete column in grid view. I click a row in grid view to Edit,it goes another page where i can edit all fields .Once i update i redirect the page to gridview. I want the grid view to remain in that particular page say 4 of the grid view
View 5 RepliesIt happened to add an extra Gridveiw Header in row_databound event , It did worked fine on !Postback but disappered on Page.Postback . Quick google search guided me to move the event to Row_Created event and every thing is okay .
Can any expert post some pointers , differnces between grid row_created vs row_databount with some sample table data created dynamically behaviour of both the events in !Postback and page.Postback .
I am doing a online web application whereby user is able to enter in new template as well as search for template. The Add template is located outside the grid view and if user clicks on the button, it will load the grid view that is populated with data as there is a row of empty fields at the bottom. However when I click on the Add Template button, the grid view does not appear.
This is my business logic that I used it to search for records as well to click on the Add Template button to add in new records:
[Code]....
[Code]....
[Code]....
i have a grid view which displays only one value and i need to extract that value and display it in a textbox?
View 4 RepliesHave a GridView with a templated select button hidden and using
e.Row.Attributes.Add("onclick",Page.ClientScript.GetPostBackEventReference(this.grdMaster, "Select$" + e.Row.RowIndex.ToString())); to select a row .
When user like to update the datasource he will select one row from gridview then in selected indexchanged event i would display the selected row values beneath the form under the grid , Then user will update the contents displayed from grid and click an update button which is outside the grid . After updating the displayed row , i got to get the values of the next row in the grid and display them for next updation , i'e if users maually selects row 3 from grid then he can update the values using the update button and then on update click itself i'll have to display next row contents of row 4 and this process could go on .
I have a grid view that does add, edit update and delete. ( I draged the grid to the aspx page ) it is working. I would like to have the following : once I lick on edit, I open a form inside the grid view to edit the fields. How can I do that.
View 4 Replies
