Forms Data Controls :: ListView Paging Dies Using Datakeys?
Mar 19, 2010
I've got a big problem here with the ListView control. Basically I've got very basic code, yet it seems to break the control completely.
Here's the deal, I got a simple ListView using an ItemTemplate containing a hyperlink. Obviously the hyperlink has to lead somewhere after clicking, so the datakeys enter the scene since I need to hook up a hyperlink containing the Id of the record it's in as a parameter.
Normally this shouldn't be a problem, so in the itemcreated event I look up the link control and add the url using data foud in the datakeys.So far so good, this all works out fine.
Now this contains a number of records, too many to display on one page, so I decided to implement paging by using a DataPager, which is the way to get the ListView to support paging. This didn't work.
After a little tinkering around with the code, I found that if I didn't get any datakeys in the itemcreated event, that it all works fine. However, I need to use the datakeys or I won't be able to hook up a url to the hyperlink.
Basically, that one line of code completely kills paging. Commenting it out immediately sets things right, but that's not an option.
[Code]....
View 4 Replies
Similar Messages:
Jun 21, 2010
I'm using a Gridview with Paging enabled. Also i'm using the Datakeys in Gridview. I can able to get the DataKeys values on first page. But when i click on the second page, i'm not able to get the DataKeys values. How to get the DataKeys values on Paging.
View 5 Replies
May 17, 2010
I have a listview and would like to scroll the ItemTemplatei instead of using paging. I need to freeze the header and InsertTemplate row, and works accross browsers. I've tried the following link:
[URL]
but am having problems getting it to work accross browsers I can get it to work in FF or IE6 but not both.
is there another control rhat's more suitable for this than the ListViiew?
View 2 Replies
Dec 27, 2010
I have a listview that I'm binding programmatically. I am trying to add a simple datapager but the paging is not working. it is because I am binding programmatically.
[Code]....
View 2 Replies
Apr 13, 2010
I'm using a datapager control on my listview to perform paging in it.When paging through the table, I need to perform some validations. When these validations are not successfull, the paging should be cancelledI currently perform the validation in the PagePropertiesChanging event of the ListView, however, the arguments do not provide a Cancel property.
[Code]...
View 6 Replies
Jan 31, 2011
If I disable the ViewState on a ListView, the events raised by it are no longer ired. OnPagePropertiesChanging is the ListView event I've always used in combination with the DataPager to update the ListView to the correct page once a DataPager item is clicked, but since its not being fired, I'm wondering if there are any other options. My ListView is currently in an UpdatePanel, and I'm caching the results that the ListView is being bound to. I could rebind the cached results on the PageLoad, but I can't think of a good way to determine if the PageLoad is being accessed because the DataPager was clicked, or for some other reason, so this doesn't seem like a good idea
View 2 Replies
Jan 2, 2011
I have a ListView control that makes use of a DataPager. In each row of the ListView there is a text box where the user will enter some notes relevant to that particular record. Then they use the DataPager to navigate to the second page of records. If they then return back to the first page in the ListView the text they entered is gone.
Question: Is there a way (through use of a paging event or databound event maybe?) to retain the textbox values between paging events ?
I would like the user to be able navigate backward or forward and still see the text heshe has entered.
View 6 Replies
Aug 17, 2010
so instead of a datasource control, I have a Data Access class that I'm using to populate the ListviewI added a datapager and everything pretty much works until I hit the first or last button. Then, I get the following error: Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/>Also, Something was mentioned about ClientScriptManager.RegisterForEventValidation - - couldnt' really find an implementationI tried setting:EnableEventValidation="false", but then, all I got was squirelly interaction with all the numbered links (sometimes having to double click them, etc) - no matter what I tried from there on out, even when I removed the enableEventValidation property altogether.
View 7 Replies
Aug 31, 2010
I have a question regarding the listview control paging and preserving the state of the items on page change.
I am using listview control and datapager control to achieve paging in the listview control.
I use the listview to display list of questions like with radiobutton list options as answers...
I am unable to preserve the selection of answers between the page changes..
for eg : I If select option1 for the question1 and move to a next page. and If I come back to previous page, the selection goes.
I tried using the view state...but could get this working..
View 2 Replies
Oct 10, 2010
So I am using EW + Access database to create a page.
This page contains two controls. First control is Dropdownlist which databinds with second control Listview.
This listview has paging on becuse of multiple pages. If I don't use QueryStringField paging works but if I use QueryStringField paging doesn't work and it goes back to first option of Dropdownlist.
View 17 Replies
Nov 1, 2012
I was wondering if there were any decent tutorials on paging the records in a ListView using a DataPager (Pager Control). I can get it to work with Drag and Drop but I can't seem to find a decent tutorial on doing it programmatically.
View 1 Replies
May 7, 2015
Is it possible Custom Paging in Listview, And also how to add css class for Datapager control?
View 1 Replies
Jul 16, 2010
I have a gridview with a linkbutton in each row. When I click the linkbutton it should update the status of a field from enabled to disabled. I am using a stored procedure to achieve this but i need to pass in a ApplicationID which i am retrieving from the gridview through the use of datakeynames. I am using the code below to get this value into a variable.
iAppID = gvApplications.DataKeys(gvApplications.SelectedIndex).Values("iApplicationID")
However when it runs it gives me the following error:
Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
View 2 Replies
Aug 24, 2010
How To Access Gridview's Datakeys In Javascript...and How To make gridview Column Visible true in javascript
View 2 Replies
Jul 22, 2010
my page based on master and Details. there are two gridview one is header and other detail.detail gridview is inner gridview.so when i click on + symbol then details should diplay.i use dataKeys for display Inner gridview record.when i use one datakeys then it is working fine but i need two condtion for show Inner Gridview. how can use multiple datakeys here?my HTML code is below. just modify it for multiple Datakeys
[Code]....
View 8 Replies
Mar 9, 2011
I have a Datagrid one of the colums is a checkbox and when it is selected I' m supposed to update that row. I have a button to update this outside the Datagrid. It seems to work well for the first two rows but after that meaning starting 3 to any it just doesnt update no errors but doesnt update. When I look into the id it seems to be empty.
Private Sub btnInactivateAllSelected_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnInactivateAllSelected.Click
'
'Function declarations
Dim currentMethod As String = MethodBase.GetCurrentMethod.Name
'Object declarations
'Variable declarations
Dim ruleID As Guid = Nothing
Dim oRule As PSXSTL.Digecenter.Rule = Nothing
Dim changetext As String = Nothing
'Start Try...Catch statement
_moduleName = "btnInactivateAllSelected_Click"
Try
For Each item As DataGridItem In GroupDataGrid.Items
If CType(item.FindControl("chkApprovalCheck"), CheckBox).Checked = True Then
ruleID = GroupDataGrid.DataKeys(CInt(item.ItemIndex))
oRule = New PSXSTL.Digecenter.Rule(DirectCast(Session("CustomerID"), Guid), ruleID)
If oRule.Complete Then
oRule.RuleStatus = False
oRule.ActiveDate = Now.ToString
changetext = "On " + Now + " " + Session("FirstName") + " " + Session("LastName") + " deactivated the Rule."
If Not oRule.ProofReviewed Then
changetext = changetext & " PDF not viewed"
End If
LogEditHistoryItem(changetext, ruleID)
' Call
' added 10/19/2004 by Rob MacMorran
LogBulkOrderHistory(oRule)
oRule.Update()
End If
oRule.Dispose()
End If
Next
' Server.Transfer("customer_clientrules_results.aspx")
Catch ExceptionObject As Exception
'Write the exception out to the event log.
EventLogHelper.LogException(ExceptionObject, _moduleName, "Error occurred in " & _moduleName & "/" & currentMethod & ControlChars.CrLf & ExceptionObject.StackTrace, EventLogEntryType.Error, 55555)
Finally
'Cleanup
'Object disposal
If Not oRule Is Nothing Then
oRule.Dispose()
oRule = Nothing
End If
'Variable disposal
ruleID = Nothing
changetext = Nothing
'Function variable disposal
currentMethod = Nothing
End Try
Server.Transfer("customer_clientrules_results.aspx")
End Sub
View 5 Replies
Feb 15, 2010
i want to clear datakeys of gridview from code behind
here is gridview
<asp:GridView ID="gv" runat="server" DataKeyNames="row_ID" AllowSorting="True" AutoGenerateColumns="false">
</asp:GridView>
and i added columns dynamically from code behind
[Code]....
View 2 Replies
Aug 31, 2010
I am trying to update a row of the child gridview through a link button template field but how do I fetch the datakeys of the child gridview ?
View 1 Replies
Feb 21, 2011
When the page is displayed have labels, textboxs, and dropdownlists on top part of the page then the gridview at the bottom with the page numbers at the bottom of the gridview. Create the columns and add data to the gridview programmatically with several hidden columns. Use DataKeyNames on the source page and use DataKeys in VB.Net code behind to get data from the hidden column cells of the selected row. On the
first page when a row is selected, the textboxes and dropdownlists have thecorrect information from the gridview hidden columns. When select another page from pages numbers at the bottom of the gridview and select a row from the new page, get theinformation from the hidden column from the first page andcorrect data from the columns that are displayed onnewly selected page.
View 1 Replies
Nov 18, 2010
Is there a way to use the GridView paging and having the links not use JavaScript. So that when you click on the page number 5 (for example) that link is a hyperlink.
View 3 Replies
Feb 9, 2011
I'd like to implement a custom paging template for my formview that displays numeric paging as well as next/previous buttons. The pre-defined templates only appear to have numeric first last as an option. Can anyone recommend a good article that covers this?
View 2 Replies
Mar 6, 2011
I have the following gridview (ID=Gridview1)
I have added pid (primary key), chkblood,chkurine,chkstool,chkmalaria as datakeynames.
what I want to pull off here is .... when I click select I'll be redirected to this wizard
[Code]....
I did that....now I want to hide / skip steps in the wizard depending on the condition of checkboxes (chkblood, chkurine,chkstool,chkmalaria)
but I cant get the value from these non-primary datakeynames...
View 2 Replies
Jul 6, 2010
i need to get data-bound items from outer listview to display in inner Listview, in this scenario:
[code]....
Where the higlighted text mean the title for outer datasource.
View 3 Replies
Feb 7, 2010
How can i implement Custom Paging for ListView control using row_number in sql server 2005 stored procedure.
View 2 Replies
May 6, 2014
I am developing a list page, for exp hotellist , in mvc razor 4 visual studio 2012 ... i use foreach to show list in view from actionresult...how to use paging 1 2 3 4 ............ to keep limit for number of records each page.. can i use paging directly.
View 1 Replies
