Forms Data Controls :: Striplines In Chart To Highlight Range Of Dates
Feb 4, 2010
This must be easier than this: I want to highlight a range of dates, in this case: All dates after today. The only control I can see which allows me to wire-in to a date based X-Axis is the Stripline So, I get today's date minus my earliest date in the dataset in days... No problems. So to set up the Stripline I try something like:
[Code]....
and ends up looking like: Today is where the second shade begins. This is fine, but it is looping over 12 months. The number of days since it began is 399 days. I was hoping that would have actually meant the offset was 399 days. Am I trying too hard with the wrong class? Is there something else I should be using?
View 3 Replies
Similar Messages:
May 7, 2015
I want to have auto-generated date from 24-10-2014 to today in gridview column...
View 1 Replies
Jan 17, 2011
I have what is turning out to be a rather complicated issue - at least for me.
I have a table with TeamID, TeamName, TotalTeamSize, ArrivalDate adn DepartureDate.
I need to create a source for a bar chart that will show the number of people deployed each month. It can be assumed that the entire team is dployed for each of the days between the ArrivalDate and the DepartureDate. Sometimes the ArrivalDate/DepartureDate spans two months (very rarely more) and sometimes it does not.
Here is what I have so far. In this setup phase, I thought I'd get the code working for one team (using a DropDownList) and then cycle through the entire table in order to get the full dataset for the bar chart.
[ASPX]
[Code]....
[VB]
[Code]....
View 4 Replies
Jan 23, 2011
I am saving to dates (fromdate) and (todate) into DB .. And then I want to view all the days (from to) and the dates in between , highlited in a calendar control ,, how can i do that ? I know how to highlight dates saved into calendar but how can i do the same to the dates inbetween ?
View 1 Replies
Feb 25, 2010
I have this query:
[Code]....
I want to select dates that also fallin the range. Heres the scenario: I have an event from 01/20/2010 TO 01/25/2010. So right now it would only return a date of 01/20/2010. How could I return 01/20/2010, 01/21/2010 , 01/22/2010, 01/23/2010, 01/24/2010, 01/25/2010? Mind you only a start and end date are in the database.
View 3 Replies
Feb 25, 2010
I have a requirement that i need to select the multiple date range.like if i select the date 21 to 26 , in that case i dont want to deselect the date in between. the funcanolity i saw in the [URL] web site where you fill the parameter and according to that parameter you find the calander.
View 2 Replies
Oct 19, 2010
I want to highlight the dates corresponding to an event (eg Jan 5-Jan 10) when the user clicks on the calendar extender.
ALso is it possible to restrict the the dates that can be selected from the calendar extender?
View 2 Replies
May 7, 2015
I haveto use a calendar control to block the schedules of a trainer and have to mark the days in red color if it is confirmed otherwise yellow..So i was wondering which calendar control would be the best for this.. Should i go for Jquery calendar control or asp.net calendar control.
View 1 Replies
Oct 30, 2010
I am creating roombooking website in asp.net.
and i am facing problem while inserting the record.
eg:
if the room is already booked from 1st march 2010 to 10th march 2010.and if anybody is booking the same room from 4th march to 9th march it should show error message stating that
this room is already booked from 1st march to 10th march.
View 1 Replies
Oct 11, 2010
Say I have a table called "Visits", and I want to create a query that counts the visits per day. The way I would accomplish this would be to create a query as such:
SELECT Count(VisitId) as VisitCount, Convert(varchar(32), VisitDateTime, 101) as VisitDate
FROM Visits
WHERE VisitDateTime BETWEEN '10/1/2010' AND '10/5/2010'
GROUP BY VisitDate
The problem I am trying to overcome is that if there were no visits in a given day, that day does not show in my list. For example, if there were 3 visits on the 1st, 2 on the 2nd, none on the 3rd, and 5 on the 4th, my result set would look like:
3, 10/1/2010
2, 10/2/2010
4, 10/4/2010
How can I create my query so that I get all days in the date range listed in the result set regardless of whether the VisitCount is zero?
View 1 Replies
Jan 11, 2010
I'm going through the ASP.NET chart controls WebSamples project but I haven't found what I'm looking for yet. So basically if I had a standard bar chart with data such as below:
John - 68%
Fred - 75%
Mary - 32%
Anne - 88%
Displaying it in one series with names as the x axis and percentages as the y, is there anyway to change or highlight the bar colour of just one, so say all the bars in the series are blue but I want to programmatically change mary's bar colour to red. Is this possible?
View 1 Replies
Jul 9, 2010
I have an issue in using dot net chart control. In chart last column is not completely shown which give bad appearance and on right side of chart it looks like TickMark are enabled. I set MajorTickMark of AxisY2 disabled but still tick marks on right side.
View 2 Replies
Feb 24, 2010
how to freeze the x axis of the chart control in ms chart? need to use because data displayed at large amount that is scrollable.
View 1 Replies
Jan 28, 2011
I have a drop downlist,and next to it there is an MS bar chart.i want to change the datate of the MS chart ,once the user selects another year from the dropdownlist.
When the page loads ,the chart displays the default year(2011) and it works.The problem is that is does not change the data when you select another year from the dropdownlist.
View 1 Replies
Apr 28, 2010
Am I going mad/blind? Probably a combination of the two.
How does one go about removing the data labels from a pie chart with the new chart control in .net 4?
I can get these to display as tooltips absolutely fine, but ultiamtely I'd like the labels not to be present as it looks rather busy.
I've searched previous answers and seen code behind resolutions but surely there must be some sort of code infront option to turn these labels off?
View 2 Replies
Aug 12, 2010
I am using MS Chart control (3.5), and have a requirement where I need to display 2 pie charts. The datapoints for the pie charts is set programatically. My doubts are as follows:
1. Can I display both the pie charts in a single chart control and area, or do I have to use two controls? (Currently I am using two controls)
2. How can I maintain the same size for both the pie charts? This is my main concern, since the pie sizes keep changing, depending on the number of datapoints. I tried using custom properties like "MinimumRelativePieSize", but it's not working.
View 1 Replies
Nov 17, 2010
i'm trying to create a stacked bar chart on a vb web form using vs2010.My data source returns:
Error in Functionality Awaiting on Supplier
1IMT IssuesmActive6
IMT Issues,Awaiting on Supplier
2,IMT Issues,Awaiting on User 4
IMT Issues Closed 120
Login / Password Active
But I can't get this into a stacked chart. I know I must have to do quite a bit of work declaring what the series are and soforth, or having a different dataset but can't find any documentation on it.A link to some documentation or an example of a stacked chart from an sql datasource would be much appreciated.
View 1 Replies
May 21, 2010
I started using the awesome chart controls with my asp.net apps recently and so far they've been nothing short of breath taking. Right now I have a weird problem, on the first load of my page, the chart control appears correctly and the tooltip is correct, however, when I update it with new data, the chart displays correctly, but the tooltips are for the previous set of data.
I hope this makes sense. The first time I load the chart, the pie chart segments and tooltips are correct, after a partial postback (to get the new data), the pie chart segments are correct but the tooltips are for the previous data set.
Basically once the tooltips are set the first time, they can't be updated after that without a full page postback.
Here's how I set the tooltip:
[Code]....
Anyone else noticed this behaviour and have a work around?
Currently my only workaround is to check for a partial postback and not render the tooltip, which I'd rather not do as the tooltip display actual statistical data as opposed to the pie itself (which uses percentages).
View 2 Replies
Sep 30, 2010
How to display dynamic header for datalist control(Dates are dynamic).Also i want header in each row.I want something like this.Words in bold are headers.Header also in each
row.8/1/2010,8/8/2010,8/15/2010,8/22/2010 are dynamic dates whic change every month based on user selecting date from datecontrol.
HeadCount 8/1/2010 8/8/2010 8/15/2010 8/22/2010
Forecaster HC 447 446 441 432
Agents Scheduled 447 446 441 432
View 1 Replies
Mar 24, 2010
I have data repeater , I want depending on value of one of its contained label , highlight the row , how can I do that
Unffortunatelly in asp.net 1.1 there's no e.item.css = ""
View 5 Replies
Apr 21, 2010
Does anyone know how to explode a certain section of the piechart, which is part of microsoft chart controls?
View 5 Replies
Jan 1, 2010
When using a range validator, if the user exceeds the defined range, How do you code it so it disables a button so the user can't continue. (without using JavaScript)
View 3 Replies
Jan 18, 2010
I want to highlight every rows in the gridview when the checkbox is selected without posting back to the server. ?
I also want to know how to make a webmail like Gmail, Yahoo.
I want my gridview to redirect to when the row is clicked but excluding the click in checkbox.
View 1 Replies
Feb 8, 2010
When my user clicks on the "select" button on a row in a gridview, is there any way for me to 'highlight' the data that is displayed in the selected row? Can I change the color of the text in just the selected row? Or change the background color for the selected row?
View 5 Replies
Nov 9, 2010
I haveissue with gridview
I use gridview inupdate panel like this
[Code]....
I use<asp:ButtonField Text="DoubleClick" CommandName="DoubleClick" Visible="false" /> for double click handeling on row
I need when click on row it be highlighted so I use the following
[code]....
View 7 Replies
