Forms Data Controls :: Web Form Displays A Blank Screen ?
Nov 5, 2010Web form displays a blank screen at
http://cforedu.com
The front page code is located at
http://cforedu.com
The behind code reads:
[Code]....
Similar Messages:
JQGrid Form Editor Displays In The Middle Of The Screen On Top?
Sep 8, 2010In my JQGrid everything works fine except for the form editor.. Do now know why but the form editor displays in top-middle of the screen.
Below is my code
$(document).ready(function () {
var briefallocationid = $("#BriefAllocationId").val();
var updateDialog = {
url: '<%= Url.Action("UpdateRegionAndCity", "BriefAllocation") %>'
, closeAfterAdd: true
[Code]....
SQL Reporting :: Reportviewer 2010 Is Coming With Blank Screen / Data Exists On The Page But Not Showing On The Screen
Mar 24, 2011I have upgraded web application from VS.2008 to vs 2010. I was using previously ReportViewer 2008 control in a page and replaced with 2010 ReportViewer Control.
I have installed the ReportViewer Redistributable also in my local pc as well as in the server. Also as per the new requirement I have placed the Scriptmanager in the web page where the reportviewer control located.
While running the page, the reportviewer run the report and is not showing the data on the screen. It shows the blank screen. But If I export the data to execl or world it is showing the data. Also the page numbers in the reportviewer showing the total pages available in the navigation bar. I am sure the report is running and bringing the data to the screen but not showing it.
Value Never Displays On The Screen
Jul 22, 2010[Code]....
There is a value being returned for this variable, but it never displays on the screen.
Web Forms :: Get A Blank Screen When Opening Any Page In Browser?
Feb 7, 2011any page that I open in my browser comes up blank.
I don't get any errors, it just comes up blank.
I also noticed that it seems to bypass forms authentication. For example, even though the page I open is blank, it is the actual page name that shows up in the browzer instead of the page that it usually redirects to for the forms authentication.
DataSource Controls :: Blank GridView With Stored Procedure And Form For Parameters?
Jun 11, 2010[Code]....
View 2 RepliesWeb Forms :: Web Form Is Shown As Blank First While Loading?
Jan 16, 2011I have created login page in which if user credential are incorrect it will show the message through jquery notification bar.But, what is happening when page is being postback it will show complete blank page after that it will load the controls of that page and then the error message will be shown if it is there. So, its taking quite a long time .So, how can we access or load the page in faster way?? or should i make any changes while postback?
View 2 RepliesWeb Forms :: Screen-scraping A Site With A .net Form Login In C#?
Mar 18, 2010I've created a web application in asp.net so far. where I've tried to get some data(site scraping) from secure page of a web site.I've used the HttpWebRequest class for this functionality but I haven't accessed the secure page yet. Every time
the login pages was scraped not secure page.I have the site user id and password and don't know that which language site has been developed in.
Web Forms :: Form Alignment / Web Page Content Placed In The Center Of The Screen?
Feb 4, 2011i'm trying to create a web page that all of the content in will be placed in the center of the screen, regardless to the screen size or resolution.
i know it is possible to set the "left" and "top" properties but this is not the solution i could work with.
Forms Data Controls :: LINQ Only Displays First Record?
May 14, 2010[Code]....
Above is the beginning of a ListView and its LinqDataSource. When the HTML displays, it picks up only the first record in the table but it's supposed to show a profile page for the user who is signed in (UserID == @UserID).
Forms Data Controls :: Gridview Only Displays First Record?
Apr 15, 2010I'm using a gridview to show numerous artists. My query gets all the records I need, but when i bind it to the gridview the gridview shows only one record. I'm also using paging and sorting. The paging is not visible. The sorting works fine. But it still returns only one record. for example: first the record is Allan --> when i sort i get the record --> Zofie. This means that all my records are inside the gridview. Why does it only show one? My pagesize of the gridview is set on 10.
I have got a recordcounter above my gridview that shows the exact number of records that are present in the gridview for example (showing 1-10 out of 231 records).
This is my layout code:
[Code]....
Web Forms :: Display Validation Error Messages When Form Fields Left Blank Or Empty?
Jul 10, 2013When I Login the page using username and password and then click the logout button and after again click Login button without entering username and password it will be login,I want to show error
View 1 RepliesForms Data Controls :: Grid View Displays Duplicate Data?
Jul 23, 2010My page has Grid View & ObjectDataSource to bind data. In page preRender event and not post back I updating the Panel to display data. Suprisingly, it displays duplicate data. I check my stored procedure and it returns Rows correctly.
[Code]....
Forms Data Controls :: Listbox Displays Value From Selected Radiobuttonlist?
Oct 30, 2010listbox displays value from selected radiobuttonlist?
View 1 RepliesForms Data Controls :: DetailsView Only Displays Background In Browser?
Aug 8, 2010I have a table in an SQL Server Express database. I created a content page and added SQLDataSource and a DetailsView. It looks great in Design View. I can see the border, titles and data fields plus the controls such as add and delete.
When I view in browser I only see the background and nothing else. If I change the background to white it doesn't display anything.
I belive the content page is ok because I can see text from <h3>Testing</h3>
I'm using Visual Studio.NET 2010 and .NET 4.0. I have SQL Server Express 2008.
The one wierd issue I was having was using a varbinary(MAX) field to use for jpg images. The DetailsView didn't seem to want to include it so I had to add it from Available Fields to Selected Fields.
Does anyone have an idea why nothing but the background displays in the browser?
Forms Data Controls :: DataAdapter Displays One Location Before The Description ?
Jul 12, 2010I have almost got this all working but one thing. What i am doing is SELECTING a number of details from a table which is for job vacancies. I am then displaying the job_name, a short description about the job and finally the location's the job is available in..If you look on this page:http://kidsunlimited.co.uk/vacancies_test.aspx
You will see a list of Vacancies shown BY job name. The problem occurs when the job is available in more than once location. Take a look at the Cook vacancy. It should be reading as Cook, then the description and then location which in this case there are 2.But instead it mixes them up and displays one location before the description and one after..This is the code i have :
[Code]....
The problem is on this line i think:
[Code]....
Forms Data Controls :: Add Categories To Repeater That Displays List Of Job Postings
Jun 8, 2010I have a repeater that displays a list of job openings. I now need to modify the repeater and break out the job openings by category.
See below for the existing code for my repeater. I'm not sure how I need to modify my repeater to display the jobs under the appropriate categories.
I've added a new JobsCategory table to the database and added the foreign key relationship between my jobListing table and the jobcategory table.
I've created a new stored procedure to pull the jobs my category:
CREATE PROCEDURE [dbo].[GetJobsByCategory]
@categoryId int
AS
BEGIN
SET NOCOUNT ON
SELECT j.JobID, j.JobTitle, j.URL, j.City, j.State, j.Country, c.CategoryName
FROM ADPJobListing j
INNER JOIN ADPJobCategory c ON j.CategoryID = c.CategoryID
WHERE j.CategoryID = @categoryId
END
In my typed dataset (tableadapter), I'll add a new query to the above stored procedure and finally in my business logic layer, I'll add a new method to call down into my data access layer:
[DataObjectMethod(DataObjectMethodType.Select, false)]
public ADP.JobsDataTable GetJobsByCategory(int categoryId)
{
return this.Adapter.GetJobsByCategory(categoryId);
}
How do I need to modify my repeater to display the jobs by category?
[Code]....
Forms Data Controls :: Formview Only Displays Some Data?
Feb 1, 2011I have a formview which only displays some data in the table cells and some data is missing.
The records a returned in the right order I verified this through SQL mgmt.
For instance the last name is missing but the first name and middle name are displayed ?
Here is an example of my html :
[Code]....
How does he HTML look to you ?
C# - MVC - Blank Model Not Returning Blank Data
Jun 2, 2010I have a form which a user can fill in x times with the data they want too. The form is posted to the following Action.
[HttpPost]
public ActionResult Manage(ProductOptionModel DataToAdd)
{
if (!ModelState.IsValid)
{
return View(DataToAdd);
}
var ProdServ = new ProductService();
if (DataToAdd.ID != 0)
{
//Edit Mode.
DataToAdd = ProdServ.EditProductOption(DataToAdd);
ViewData["Message"] = "Option Changes Made";
}else
{
//Add
DataToAdd = ProdServ.AddProductOption(DataToAdd);
ViewData["Message"] = "New Option Added";
}
var RetModel = new ProductOptionModel() {ProductID = DataToAdd.ProductID};
return View(RetModel);
}
So at the bottom I blank the model (Leaving just the required field) and then return to the view. However the view holds the data from the previously submitted form. I have debugged the code and checked that the RetModel variable is empty.
Forms Data Controls :: Parent/Child Datalist Displays Correctly Sort Of?
Jan 11, 2011I have created a search page for web application that will allow a user to search the database based upon employee name or supervisor name. It is a multiple table database that is linked together by an unique employee number column, primary key in people and foreign key in supervisor. I have a parent/ child datalist used to display the record. When searching by the employee name it will return the record correctly if there is a record found. However, if I search by supervisor name and there is no match for the supervisor name, it will return all the records and create the parent datalist with all the employee details there, but the child datalist with the supervisor information is not display as there is no record with that supervisor name.
[code]...
Forms Data Controls :: Open Website From Gridview Displays Localhost Path?
May 18, 2010I ahve a gridview and itemtemplate in which I have an URL field from the database. When I clicl on this URL, it should open in another browser the URL that we clicked on.
<asp:TemplateField
HeaderText="Website"
SortExpression="Dev_Company_City">
[code]...
Forms Data Controls :: MS Report Viewer Displays Different Sorting With Query Result?
Feb 11, 2010Microsoft report viewer showing different sorting with query result. My rdlc report has 2 groups [2steps] .Query Result>>
col1 col2 ......
5 aa
5 bb
4 bb
4 cc
MS Viewe displays
4 bb
cc
5 bb
aa
Forms Data Controls :: Multiline Grid Cell Displays Correctly In IE But Not FireFox Or Safari
Oct 14, 2010Using C# in the ASPX file, I define a grid:
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False"
OnRowDataBound="OnRowDataBound"
BorderStyle="Double" Caption="Club's Dashboard"
CaptionAlign="Top" Width="292px" EnableTheming="False"
HorizontalAlign="Left" CellPadding="5">
<HeaderStyle BackColor="Fuchsia" Wrap="False" />
<RowStyle HorizontalAlign="Center" Wrap="False" />
<columns>
<asp:boundfield datafield="B2" headertext="." htmlencode="false"/>
<asp:boundfield datafield="PRPT" headertext="TestA<br/>TestB" htmlencode="false"/> ........ Notice the .<.b.r././.> TAG between "TestA" and "TestB"
</columns>
</asp:GridView>
In the ASPX.CS file I define a datasouce and manually populate it.
DataColumn MDC = new DataColumn();
MDC.AllowDBNull = false;
MDC.AutoIncrement = true;
MDC.AutoIncrementSeed = 1;
MDC.AutoIncrementStep = 1;
MDC.ColumnName = "B2";
MDC.DataType = System.Type.GetType("System.String");
MDC.Unique = false;
MDT.Columns.Add(MDC);
MDC = new DataColumn();
MDC.ColumnName = "PRPT";
MDC.DataType = System.Type.GetType("System.String");
MDT.Columns.Add(MDC);
I then manually fill each row:
DR = MDT.NewRow();
DR["B2"] = "Test1<br/>Test2";
DR["PRPT"] ="Test3<br/>Test4";
MDT.Rows.Add(DR);
When the Grid is viewed using IE - both the Header and the data rows properly display the cells with multiple lines. When displayed using Firefox or Safari - only the Header utilizes multiple lines - the data rows are on a single line ---- "Test1Test2" what needs to be done to display multiple lines in all three browsers.
Forms Data Controls :: Built A User Control That Displays A Drop Down List Of States?
Mar 17, 2011I built a user control that displays a drop down list of states. I'm using it, but if I try to put it in a listview control, all I get is the frop down with nothing in it.
View 3 RepliesScreen-scraping A Site With A .net Form Login In C#
Mar 18, 2010I've created a web application in asp.net so far. where i've tried to get some data(site scraping) from secure page of a web site.I've used the HttpWebRequest class for this functionality but i haven't accessed the secure page yet. Every time the login pages was scraped not secure page.I have the site user id and password and don't know that which language site has been developed in.
View 1 Replies
