DataSource Controls :: Blank GridView With Stored Procedure And Form For Parameters?
Jun 11, 2010[Code]....
View 2 Replies
Similar Messages:
DataSource Controls :: How To Pass Parameters To Stored Procedure
Apr 30, 2010Ive tried a few ways of doing this without success and got together a simplified example so hopefully I can get an answer. When I try to INSERT using a stored procedure InsertTest (normal SQL works OK) I cannot. I need to know how to pass the @Model parameter to the Stored procedure
Have a Stored procedure which can be executed and after entering string for @Model through wizard a new record is created
My asp:SqlDataSource includes InsertCommand="InsertTest" InsertCommandType="StoredProcedure"
Also my <InsertParameters includes the asp:Parameter Name="Model" Type="String"/>
My drop down (and I think this is where the problem is ). Record is Inserted after choosing Model and pressing enter
Do I have to set one of the properties in the drop down to tell the Stored procedure the parameter being passed is the parameter Model ??
[Code]....
DataSource Controls :: Trying To Populate A Dropdown From A Stored Procedure That Includes Parameters
Nov 11, 2010I am trying to populate a dropdown from a stored procedure that includes parameters. The parameters are programmatically defined variables. I have been working at this for hours, and scoured the internet for a tutorial. I have come up with the following solution below. However, it does not work. Its not pulling any data, and I am not even sure that the page is making it into the GetLast5Schedules_Selecting Event. There has to be a more efficient/less time consuming way to do this!
[Code]....
[Code]....
[Code]....
DataSource Controls :: Grab Unknown Parameters From Stored Procedure From Code Behind?
May 3, 2010I am trying to allow users to grab their stored procs and call certain ones from within code. I can get the stored procedures and then fill a dropdown with them, but what I cannot find at this point is how to get the parameters that each stored procedure needs. I would like, once an SP is chosen from the dropdown to make a call to the db with that sp name and grab its paramter list so I can report what needs to be sent in to the user.
View 1 RepliesDataSource Controls :: Pass The ID And SelectedDate Values In To The Stored Procedure As Parameters?
Jun 14, 2010How do I pass the ID and SelectedDate values in to the stored procedure as parameters??
[Code]....
DataSource Controls :: Validating Length Of Data In Context With Stored Procedure Parameters?
Apr 19, 2010I am building a WCF Web Service that has a Business Logic layer (that implements all validation logic and other business rules) and a Data Access Layer that makes calls to Stored Procedures in my database.
I would like to be able to validate the length of data passed against that of the length of the parameters in the Stored Procedures without having to explicitly define the parameter lengths in my WCF Web Service.
Eg:
Person Object
Person.Name = "John Dhoe"
Person.Age = 37
SQL Stored Procedure
SavePerson
FullName Varchar(15)
Age Int
In my BLL or DAL, I would like to be able to do something like :
If(Person.Name.length == SavePerson.Parameters["FullName"].Length)
{
Return true;
}
else
{
Return false;
}
Has anyone tried this out before? Is this even possible?
DataSource Controls :: Function To Accept Unlimited Parameters For Stored Procedure - Determine Data Type
Jun 22, 2010I am trying to write a function that can be called to run a stored procedure. I pass the stored procedure name, followed by as many parameters as I need to run the procedure. I am able to do this by using the params keyword, so my function looks something like this;
[Code]....
How can I determine what the data type of the parameter is? Maybe I need to alter the string[] part, above?
Forms Data Controls :: Load A DropDownList Into A GridView With A Select Stored Procedure With Parameters
Sep 19, 2010I want to have a dropdownlist in the footer row of a gridview. The dropdownlist must be populated with an stored procedure that receives a parameter and has a select. Is that posible?? I think yes but I having problems with the parameters.
[Code]....
The exception says incorrect sintax... but I've changed the procedure for something very simple to solve the problem like select 'hello' or select 1, 'hello' and I'm getting the same problem...
Forms Data Controls :: Passing Parameters To Stored Procedure When Edit Button Is Clicked In GridView
Oct 27, 2010I have a grid view that populates and displays data at btn click event from the following sql statement in one of the SP:
SELECT
reg_code, pc_serial, act_code
FROM user_reg
WHERE reg_code=@reg_code
I want to pass parameters to the other Stored procedure when the edit button is clicked in order to update the 2 columns in the specific row at the time. I now how to pass parameters in a regular btn click event or function, but in the case of edit btn in grid view I don't know how to capture data from specific row and then pass it to the SP. Here is Stored Procedure to update the columns (every user always has the same reg code, but may have more than one serial number and activation code, I want to let the user update serial number and then based on the serial number generate new activation code in the SP.):
[Code]....
DataSource Controls :: How To Convert The Oracle Stored Procedure To Sqlserver 2005 Stored Procedure
Apr 2, 2010This is surareddy. i nead some small clarification in the "Stored Procedure"
how to convert the oracle Stored Procedure to sqlserver2005/2008 Stored Procedure.
right now i am enhancing the project that project already developed the oracle Stored Procedure. now our company is using sqlserver 2005/2008.
how to convert the Oracle Stored Procedure to sqlserver 2005 Stored Procedure
DataSource Controls :: Do Not Use Or Call Any Stored Procedure But It Says "Could Not Find Stored Procedure 'xxxxx'?
Dec 9, 2010Initially, I have tried to use stored procedure. But I changed my mind and preferred to call sql query in codebase with command text. However, it stills tries to find initially-called stored procedure (which is neither called or exists).I think that it is related caching. But I tried it with different browsers it did not work.What might be the reason?
View 4 RepliesDataSource Controls :: Using Stored Procedure And Using Databind For The Gridview?
Oct 29, 2010am having trouble figuring this one out. Am using stored procedure and using databind for the gridview . i got the codes off other sites. I'm guessing its the code that i've underlined, how or what do i use as the datasource for the sorting event. I used the Session for the paging event and that works but not for sorting.
[Code]....
DataSource Controls :: Execute A Stored Procedure Within A Stored Procedure?
Jan 18, 2010Does anybody if it is possible that a stored procedure returns rows which is the result of the execution of another sp? Something like..
[Code]....
DataSource Controls :: How To Call A Stored Procedure In Another Stored Procedure
May 13, 2010i want to return output parameter from 1 storeprocedure. into another stored procedure.
View 7 RepliesDataSource Controls :: Stored Procedure With Multiple Result Sets - Binding To Gridview?
Feb 3, 2011I am using a sql stored procedure which returns multiple result sets. By default Sql Datasource is binding the first result set to gridview. I want the second result set to be binded. I browsed all the properties in Sql datasource but could not find one to set this.
View 4 RepliesDataSource Controls :: ObjectDataSource Sorting And Paging In Gridview Using LINQ Stored Procedure Methods?
Jan 31, 2010I started learning LINQ, So i thought of just creating gridview with sorting and paging using objectdatasource using LINQ. So i got this link
[URL] which Brian Orrel tell us how to do using IQueryable Interface. but i have nearly 300 lines of stored procedure which joins nearly 20 tables. so i thought of creating a stored procedure and using that instead of IQuerytable.
[code]...
Forms Data Controls :: Stored Procedure - Parameters Required?
Oct 13, 2010The update option is using a stored procedure. There are no parameters fro the SP but the error message is saying that parameters are expected. If executed as SQL string then it works OK. I need to use a SP as other updates are required. Code: THIS WORKS
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:appConnectionString%>"
ProviderName = "<%$ ConnectionStrings:appConnectionString.ProviderName %>"
SelectCommand = "SELECT * FROM [qryNewManifestSub] where manifestid = 6855"
InsertCommand = "INSERT INTO [qryNewManifest] ([LocationId], [ManifestDate],
[RouteId], [VehicleType], [ManifestType])
VALUES (@LocationId,
CONVERT(DATETIME,@ManifestDate,103), @RouteId, @VehicleType, @ManifestType)"
UpdateCommand = "INSERT INTO dbo.tbl_DEBUG
(ManifestId, ManifestTripId, LocationId, Manifestdate, RouteId, VehicleType, ManifestType)
VALUES (1,2,3,'01/01/2010',4,5,6)"
UpdateCommandType="Text"
DeleteCommandType="Text">
<InsertParameters>
<asp:Parameter Name="LocationId" Type="Int32" />
<asp:Parameter Name="ManifestDate" Type="DateTime" />
<asp:Parameter Name="RouteId" Type="String" />
<asp:Parameter Name="VehicleType" Type="String" />
<asp:Parameter Name="ManifestType" Type="Int32" />
</InsertParameters>
</asp:SqlDataSource
This does not work Error Message - parameters expected but none given
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:appConnectionString%>"
ProviderName = "<%$ ConnectionStrings:appConnectionString.ProviderName %>"
SelectCommand = "SELECT * FROM [qryNewManifestSub] where manifestid = 6855"
InsertCommand = "INSERT INTO [qryNewManifest] ([LocationId], [ManifestDate],
[RouteId], [VehicleType], [ManifestType])
VALUES (@LocationId,
CONVERT(DATETIME,@ManifestDate,103), @RouteId, @VehicleType, @ManifestType)"
UpdateCommand = "usp_TESTSP"
UpdateCommandType="StoredProcedure"
DeleteCommandType="Text">
<InsertParameters>
<asp:Parameter Name="LocationId" Type="Int32" />
<asp:Parameter Name="ManifestDate" Type="DateTime" />
<asp:Parameter Name="RouteId" Type="String" />
<asp:Parameter Name="VehicleType" Type="String" />
<asp:Parameter Name="ManifestType" Type="Int32" />
</InsertParameters>
</asp:SqlDataSource>
Stored Proc
usp_TESTSP
This SP has been tested and works OK
USE [TMSWEBALL]
GO
/****** Object: StoredProcedure [dbo].[usp_TESTSP] Script Date: 10/06/2010 14:03:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[usp_TESTSP]
As
BEGIN
SET NOCOUNT ON added to prevent extra result sets from
interfering with SELECT statements.
SET NOCOUNT ON;
*/
INSERT INTO dbo.tbl_DEBUG
(ManifestId, ManifestTripId, LocationId, Manifestdate, RouteId, VehicleType, ManifestType)
VALUES (1,2,3,'01/01/2010',4,5,6)
END
>
Passing Blank Field Value To Stored Procedure C#?
Feb 21, 2011I want to return all rows from a SQL Server 2008 database table into a SQL data source if a textBox field is blank. So I made a stored procedure with an if @date IS NULL clause.
Although the stored procedure seems to be working fine in Visual Studio 2008 the actual webpage displays no results.
I am guessing I have to send a DBNull value to the stored proc if textBox.Text == string.Empty. I tried the SqlDataSource1.SelectParameters.Add but it seems that I get a conversion error from DBNull.Value to string.
Is this the source of my problems or am I missing something else? How would I pass DBNull.Value to a stored proc if a textfield is blank?
ADO.NET :: Stored Proc With Output Parameters / Data In The Output Parameters From The Stored Procedure?
Mar 30, 2011I have a stored procedure that works fine for classic asp, but how can I get my output parameters data back from in /MVC 2 / linq/ entities framework model . I have inported the function also, but when i try to code it i dont get results ...i know this is a matter of lack of / knowledge or exmple because i have been scouring the web for it and cannnot find into that accually works.
here is the stored proc.
[Code]....
Here was the one of the few tries I did:
[Code]....
but it executes fine does not give me an error, but also does not return the info i need to the viewmodel
I keep seeing stuff about "ref" on the net but "ref" shows " arbument # should not be passed with the ref keyword.
So i am not sure if there is a problem with the model, or with my understanding this, Now for your info I can do the same step with returning a dataset from a stored procedure fine, but I dont want a data set I just want excatly the data in the output parameters from the stored procedure.
DataSource Controls :: Call One Stored Procedure In Another Procedure For Search?
May 1, 2010I want to apply other stored procedure select query on result of first stored procedure.
View 1 RepliesDataSource Controls :: Stored Procedures Are Not Showing Up Correctly In The Stored Procedure Drop Down
Apr 27, 2010I am using Visual Studio 2008 and SQL Server 2008 and have added a SQL datasource to my form.
When I configure the datasource, I choose my connection string which looks like this in my webconfig:
<connectionStrings>
<add
name="PSFSPRD_ConnectionString"
connectionString="Data
The database I am using has a schema called EQB and as such, my stored procedures are named as EQB.usp_SelectFunds, EQB.usp_SelectAccount, etc.
On the select tab of the Configure Data Source screen, I choose to use a stored procedure. The dropdown shows my stored procedures, however, the schema name does not show up in front of the stored procedures in the drop down. I see only usp_SelectFunds, usp_SelectAccount, etc.
I select one of the stored procedures and when I click TEST, I get the message that the stored procedure is not found. If I instead choose to use a SQL statement instead on the configuration screen and enter EXEC EQB.usp_SelectFunds and click TEST, it works fine.
Why are my stored procedures not showing up correctly in the stored procedure drop down and how can I fix this?
C# - Getting 'too Many Parameters Passed' To Stored Procedure?
Nov 30, 2010I'm having trouble figuring this error out. I have a grid on an ASPX page that displays data from a stored procedure in an SQL Server 2008 database. When the page loads, I get the following error:
"Procedure or function <sp_name> has too many arguments specified."
Here is the code for the grid and the datasource:
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AutoGenerateColumns="False"
DataSourceID="SqlDataSource1" ShowFooter="True" OnRowDataBound="GridView1_RowDataBound"
AllowSorting="True">
[code]....
Here's the code from the stored procedure:
ALTER PROCEDURE [dbo].[sp_GatewayMerchants]
-- Add the parameters for the stored procedure here
@StartDate DateTime,
[code].....
The datasource is passing 4 parameters, and the stored procedure is accepting 4, but when the page displays I get the error mentioned above.
EDIT: Here's the code behind for the template column. But I'm not sure how this could be causing extra parameters to the SP.
protected void Command_Click(object sender, EventArgs e)
{
var merchantID = Convert.ToInt32(((LinkButton)sender).CommandArgument);
[code].....
If I remove the ASP:LINKBUTTON the code works. So why would a LINKBUTTON be causing this?
Dynamic Parameters In A Stored Procedure?
Jan 19, 2011I need to update a table with values from a listbox. I am trying to create as many parameters as there are items in the list, my code below, but how do i name them differently? so that they dont' overwrite each other?
For Each item As ListItem In ris
Dim pID As New SqlParameter("@userid", SqlDbType.Int)
pID.Value = objFormat.CheckSQL(item.Value)
myCommand.Parameters.Add(pID)
Next
and on the SQL side, is it possible to write an update statement, that will take a dynamic number of parameters?
so for example, i need to update multiple users with the same value in the "active" field...
Stored Procedure Call With Parameters In .NET MVC?
Apr 22, 2010I have a working controller for another stored procedure in the database, but I am trying to test another.
When I request the URL; http://host.com/Map?minLat=0&maxLat=50&minLng=0&maxLng=50
I get the following error message, which is understandable but I can't seem to find out why it occurs;
Procedure or function 'esp_GetPlacesWithinGeoSpan' expects parameter '@MinLat', which was not supplied.
This is the code I am using.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web; [code].....
Stored Procedure Parameters - Sometimes NULL?
Jan 19, 2011i have a stored procedure to update a table. not all fields are required and some can be blank.for example, title is not required, but when it's blank i get an error
Dim ptitle As New SqlParameter("@title", SqlDbType.NVarChar, 20)
ptitle.Value = objFormat.CheckSQL(title)
myCommand.Parameters.Add(ptitle)
ex {"Procedure or Function 'sp_UpdateUser' expects parameter '@title', which was not supplied."} System.Exception
how can i fix it so that it allows for nulls if the data field is blank?