I have a grid view with item template ....In the footer template of the gridview i have a button ... On clicking the button a new item template row is created .Wat i need is , by pressing the enter key i need to add new row .... It is already adding new row on button click .... The same should be done on pressing the enter key on the last row of the gridview item template .....
View 2 RepliesI have a asp:button in template field of gridview, I set command name for this and in grid I mention on command event. On clicking the page it shows error message is :Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/>
[code]...
I have a asp:button in template field of gridview, I set command name for this and in grid I mention on command event. On clicking the page it shows error message is :
Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
Below is my code
<asp:GridView runat="server" ID="gridManageClients" AutoGenerateColumns="False" OnRowCommand="gridRowCommand">
<Columns>
<asp:BoundField DataField="Clientid" ItemStyle-Width="75px" />
<asp:BoundField DataField="ClientName" ItemStyle-Width="300px" /> [code]...
I have a form that I am using with jquery for an application... everything is working fine but I have one issue....I do not want the form to submit when the user presses the enter key... if they press the enter key it will reset the whole sequence and I am running through an array that is placed in the system memory of the client(client-side javascript)is there a way to capture this event properly? Are there other ways that could submit the form?
View 4 RepliesI have a formview with various templates set up for a database that has 255 columns. I need the insertitemtemplate to pre-fill values based upon a specific selection by the user (just like the edit item template) but when the template is switched to insertitemtemplate every text box is cleared. The idea is that a new entry is usually made by making minor changes to an existing entry. With 255 fields I don't want to require the user to enter every field when only three or four need to change.
View 8 RepliesI have a gridview which the columns are created programmatically.
When a button is click i will clear all columns and add the columns that I want. Im adding a boundfield which is not a problem. When I add a template field, I must add also the item template which is my problem.
How can I add a item template in the template field I created which is binded in my datasource. Also what event handler should I use to do this.
Here's the part of my code:
[Code]....
Someone know how can I bind a label item template from the datasource. The label item template should be firstname + middlename + lastname.
If im not doing it programatically, it will be just concatenating eval(). But how can create item template and bind it programmatically?
I have a textbox added in an item template so I can enter data. But when I press enter in a textbox it caused the page to postback and I lose the data entered. I can tab through fine but why does Enter cause a postback? Can I disable this?
View 1 Replies im here trying to find a solution to this problem, in a form i have a textbox and a button to do a basic search in a database, so the user types the search criteria in the textbox and then clicks on the button to search, this works just fine, the problem is when the user enter the search criteria and then press enter inside the textbox, in this scenario the user gets to the login page, its a strange behavior, its like its loggin me out of the web application, im using form authentication in asp.net with vb.net
i have trying this to disable the textbox onkeypress event, but it doesnt seem to work:
[code]...
I have two search textboxes and two corresponding buttons on my web page.One of the textboxes is a default textbox coming from the .master page and the other one is local to the page.Now,when I enter some text into the local textbox and press enter, the event of the master page button gets fired instead of that of the local button.How do I fix this issue? I tried to shift focus to the local button and on the text changed event but the master page button event is always the last one which is getting fired. I tried changing both the buttons to LinkButtons but then enter doesn't work!A
View 2 RepliesI've a Username and Password TextBoxes, and more than one ImageButton in the page, so while I type the password, press enter, it presses another ImageButton than the Login ImageButton in my page.
How can I choose which ImageButton function to fire when pressing Enter while in the Password TextBox?
iam having four textbox and i have one label and i disable it .after entering in all textbox and i click submit button label is showing as "sucessfully inserted" and then if i focus on any textbox the label should disable and i press enter should not enable label and i pressing tab should not enable label.
View 1 RepliesI have a grid view which is placed in update panel and when i am trying to click outside the page and press enter the first row in my grid view is getting focus.What m looking for is that on pressing enter nothing should happen in the page.
View 1 RepliesI have a button in gridview footer template ....Wat i need is on gridview item template last textbox of the row , i will press enter key then the enter key should be focus to the button and button click event should be fired ......
View 3 RepliesOK, been burning up Google and Bing trying to figure out a good solution to this problem, and so far, I feel like I've taken a dive down a rabbit hole - I'm just waiting on the Queen of Hearts and the Mad Hatter to show up. Alice is kinda cute, but unfortunately, she didn't have any good suggestions, either.
Here's the scenario - I have a User Control on a Child Page that has a Master Page assigned. The control is for logging in to the system, so it contains two text boxes, a couple of links to password recovery and registration, and an ImageButton to handle submission of the username/password entered in the text boxes.
Everything works just as expected when the user actually takes the mouse and clicks on the ImageButton control.
Things don't work so well when the user enters a username and password and then presses the Enter/Return key.
While debugging, VS2005 (I know...ugh!) will stop at the LoginButtonClick event, and seems to run the code. Of course, the .Text property of the two input controls was empty, but the Request.Form collection had the values burried within the collection of Keys.
So, a little bit of digging got me to the point where they can login using either the Enter key or clicking on the ImageButton. So, everything seems like it's good, right? Nope, not so fast.
When I enter a username/password combo that's designed to fail authentication, the code will step through setting the error message, etc, but that information never makes it to the point where it's visible to the user.
I'm not seeing any extra postbacks (obvious ones, anyway), but for some reason, when the page goes to redraw when it's in a "failed" state, the notations just simply aren't there.
Below is the code in the User Control that handles the actual authentication routine. All controls, such as the Label with ID "message", are local to the User Control, so I don't think it's a FindControl("message") problem or something similar...just so bizarre that it disappears seeming without reason.
[Code]....
I have a few sections in my code with a button to do something different in each. I'm pretty sure the user would press enter to submit the section, but I would like to handle it nonetheless.To handle it, I put the "sections" into Panels, and set the default button for each. There is a total of 4 panels and default buttons set to their respective included buttons.When I press enter in 3 of them, the correct event fires, but not in one (it calls a different button).I put MsgBoxes (for testing) at the beginning of each server event to see which is being called, and it's not the correct one.I might as well post the code, but it's fairly simple. I don't know if the accordion affects it at all, but it doesn't seem like it should...
[Code]....
Sorry, I hate when people post way too long code, but most of it doesn't exactly apply, so just focus on the panels.When I press enter when in focus in on a textbox in BudgetReportsPanel2 and press enter, the
UpdateButton event is called instead.
I'm sure this has been asked before I just did not know how to ask it to get the forums to show up the right answer. I have a master page with a search box and then a content page with an input box and a submit button. As I'm using the program, I as a keyboard lover always hit enter after typing text into a text field. The issue is that when I'm typing in the input box and I press enter, the search boxes button will steal this enter. How can I divide the two asp.net form elements so that when I'm typing in the search box and press enter, the search button is invoked and when I'm typing in the input box and press enter the input button is invoked? An example of this happening is in the code below
[Code]....
i have searched this forum about this pbm. But People posted about Dynamic Image Button .. In my case, this is a static design only. I have a login page with image button as the Login button. I set Panel's Default button to that image button. onclick event Sometime fires, sometime not firing when pressing enter on the password field..If this happens once, then even if i click on the Image button also, the event is not firing.. but the form is post acking....Strange! i have removed panel's default button and wrote this line instead on page_load..
[Code]....
Still, the same pbm persists. Even i click on the imagebutton without pressing enter key also, the same pbm comes sometimes...I couldnt trace why.
I have a logout button on the master page.
I have a textbox on my subpage.
When I click the text box i notice that the logout button on my master page gets focus. So if the user types something in the textbox and then presses enter/return (a common reaction it appears) the user inadvertantly logs themselves out as the logout button is triggered.
Is there any way of stopping this?
i am implementing a update query module.i am displaying all fields from a table for a term searched. well now i am implementing update option for the record which are displayed, i have like 70 columns in my table, and i want to know how to restrict some selected fields to be only read only while the form can be updated ?Like if user select to update a record then some selected field such as "Timestamp, UID etc some selected fields" remains READ ONLY !
View 1 Repliesi am using master page i have in my left menu there is a button to logout on the left menu when i click on it i was typing inside a textbox and but whenever i press Enter it logs me out i think because it s causing the click on buttonlogout how to avoid this problem in all my pages but i don t want to disable the press enter only i need to stop it on log outbutton from left menu it seems i have to set focus off on this button.
View 8 RepliesI have two textboxes and one Button control.....In first TextBox when press enter key moves to next textbox(Barcode) and when i press enter in barcode textbox it fires the button click event......till that its ok....But what happening after fireing the Button click even on enter in Barcode Textbox its going back to focus on first textbox.........But i want this to stay in same Barcode TextBox to scan more barcodes.
(e.keyCode ? e.keyCode : e.charCode);
var key = e.which;
if (key == 13) {
e.preventDefault();
var nxtIdx = $inp.index(this) + 1;
$(":input:text:eq(" + nxtIdx + ")").focus();
}
I have the following line to display a piece of data and I want to know how I can format the output.
Text='<%# Eval("DOH") %>'
The data list displays the correct data, but I want to format it. The output I want is just a small date format instead of date and time. I have tried every combination of a format function I can think of, but can't seem to make it work. Am I stuck with the raw format provided by the database? I wouldn't think so, but maybe that is the case.
expected output should be 02/15/2011 instead of 02/15/2011 09:45:
i am working on grid view that have an item template contain a linkbutton that should delete its row so my broblem is how to get the index of the row which i have clicked its linkbutton i tried to search online msdn and asp but no answer helped me or may be its just me i was able to delete row by using enable deleting from the smart tag of the grid view but i was using sql data source which brings data from sql table but later i had to replace the sql table with sql view after i did that i couldn't enable the checkbox of enable insert,update and delete statment in advanced sql generatiom options in configure sql data source wizard and this is the other proplem and i not asking this for delete the record only ,it could help in send emial button which is placed the in item tamplate too and i am using C# by the way.
View 2 RepliesI have a dropdownlist as a template item in a gridview - it populates fine and with the right values. I have an SelectedIndexChanged on the dropdownlist, and has set it for postback. In the SelectedIndexChanged event, I would like to know where the control that fired this event is, - which row in the gridview is it in? How do I get this info? If the row was selected it would be easy, but the only thing that has happened in that row is that the dropdown has changed value and consequently the SelectedIndexChanged event has been fired - is that enough to know which row the event has been fired from?
View 1 RepliesI am using Asp.net with C#.
I have one gridivew, which is showing 20 records. And also, in item template of Gridview, I used one dropdownlist. It means there are 20 dropdownlist with all the 20 rows. That dropdownlist is already binded, means showing the records/items - 8 items. No issue with this.
Now, what I want is, when ever, I select any item from the drodownlist against each row in that gridview and click on the button "Save", it will save the id of all row with all the values of dropdownlist.