i have a web page and what i was wanting to do is divide it into lets say 4 quadrants, and in each quadrant i have a control ( a gridview whaich has data dound to it) .
when a user clicks on lets say one of the four the grid does a drill down and display the results in that particular quadrant only while the others are left untouchd .,
how can i go about doing this ?
I need to separate the master page as left side and right side.
In my left side i need to show the images without buffering and the content as a marque text using jquery.....
i need to divide my page content in a page.
on left side i have a Tree Control on the basis of that i have to refresh the right side details element into div. Scrolling tree should not disturbed the right side elements as well as right side details should not scroll the page or tree control scrolling.
How can i achieve this task?
I have a web page that has lots of different parts to it (i.e many data grids). The page takes quite a while to load up because it is running all the stored procedures to populate each grid so the user is left waiting for the whole page to load.
I would like to improve this by loading the page a section at a time so that to the user is not left waiting for the whole page to load up before anythin can be viewed.
What is the best way to tackle this problem. Do i need to use threading or would i being going down the wrong path looking into that.
I currently have a website which I want everyone to be able to view, authenticated or not. But if someone does sign in, I want different controls and different C# code to be run on the page.
At the moment I have not put any asp security in. I just have two text boxes that check against the database then keep the user logged in using a session variable. Each page then checks to see if the logged in session variable has a user in it and runs the code.
I'm assuming this is not the most secure way, is there a way to do this correctly?
a repeater contain 30 record how to
id name
1 a
2 b
3 c
4 d
............................
......................
.....................
31.......... x
how to divide in two table i means one table left side and second is right side
Left side
1........................a
.......................
16.....................m
right side
17.....................n
.........................
.......................
31.........................x
I have a piece of code which gets clients list from a database and write to XML as follows:
[Code]....
Which Creates XML file as follows:
[Code]....
I need to group the client list in my online site to show(group) each 4 clients within separate div and ul
[Code]....
My target is to use one of the following two directions:
1 - Find a solution to group data while generating the XML file to groups of 4 items
[Code]....
2 - Try to group the xml in my repeater by finding a solution for nasted-like repeater or custom item template and separator template to make the output like the above div/ul structure
I also have no problem if we can do this through the SQL stored procedure
I have a datalist where I am displaying the Tickets for any conference. Now the posblem is that on the first page I need to display some custom data and attendees information so I need to start tickets from the 2 row and same needs to be done on the footer.I have used datalist so that the data looks like actual ticket. If something else is possible, which is a better solution please elt me know .
e.g.
[Code]....
I get the " The table must contain row sections in order of header, body, then footer!!" when i am using the following code
[code]
GridView1.HeaderRow.TableSection = TableRowSection.TableHeader;
GridView1.FooterRow.TableSection = TableRowSection.TableFooter;
[/code]
how to correct this problem.
I would like to divide a table of 100000 records into batches of 20000. I realize I could use the select top....
but is there a faster way to do this.
I'm extracting data from a webserivce.
This is my select statement to retrieve the data:
string cmdstr = "select title, titlefr, racpnr, racpmodeltype from onl_wgn where show = 1 order by onl_kl, racpnr";
I got 4 groups of onl_kl. Now I want to show each group in a tab of the jquery tabcontainer.
I can pass the data in a dataset from my webservice to my webapplication and databind it to a listview, but I don't know how to seperate the data into the 4 tabs? Is this possible in a way with a listview or using other datacomponents?
If not, should I make 4 select statements in my webservice and send 4 datasets to my webapplication and bind it to 4 listviews each in 1 tab? If so how I can pass a list of datasets from a webservice to a webapplication?
i want to display my navigation in 2 horizontal menus, one on the top, the other on the bottom. I also want to use sitemap since it ease the maintenance of links. Is there a simple way to achieve this ? (I am not talking about Parent child, say i want to display the first 8 nodes in up menu and the left in the bottom menu.)
View 5 RepliesI have a master page that I want to use acorss my application.
Now I want all my pages to have left, top, right, bottm section uniformily accross my site.
I am not very good at css, could anyone show me how to use divs, css etc.
I want to a an left menu, a top menu, a right ad section and a bottom footer section,
i need a way to extract the data from the below in to an array of some sort so i can post only what i need to my page.
the field i need is the var lasttrade and the var lasttrade
how do i go about extracting the data to get what i need... im used to xml feeds but not this...?
[URL]
Doesnt HAVE to be an array, just anything i can use to get the data from the page and post
Depending on the data returned from a Stored Procedure, I need to add specific controls to a page and then when they are populated by the user, write them back to the database. What is the easiest way of doing this?
View 9 RepliesI have a web app that uses a master page with mulitple user controls on each content page. Most of the content pages have grids (telerik) that present data, with HTML tables that are created dynamically from a database. I write the load the HTML dynamically into a label. We also are loading a YouTube snippet that is set in HTML and we are get the most recent video within a playlist.
My challenge is that the pages are loading slow. Very slow. There is consistent traffic to the main site with two other sub domains for management and they all utilize one database (shared within one instance of about 20 databases) on a shared web hosting server.
My goal is to determine if the User Controls, Data Access, WebServer, or SQL Instance is slowing the site (all 3 domains).
The site is running good with about 400 avg daily users, however, the site is now averaging about 1300+ daily users and i'm not sure if a Dedicated Server w/dedicated SQL Instance will resolve the challenges we are facing.
I have downloaded template for my web site and made it a master page after few weeks I have started my work on it but now it is giving me error.
Sections must only appear once per config file. See the help topic <location> for exceptions.
and showing that line 69 this error is in the given below code.
<?xml version="1.0"?>
in my code behind how do i divide a requested querystring value by a label value?:
Label55.Text = Request["r1"]/Label71.Text;
I've got some code which is working as it should but it just seems like a bit of a round about way in doing it and how to tidy it up
Here's my code
Dim TotalNumber As Double
Dim NumberFilled As String
NumberFilled = Nothing
For x = 0 To drCode2a.Tables(0).Columns.Count - 1
If Not drCode2a.Tables(0).Rows(0)(x).ToString() = "0" Then
NumberFilled += drCode2a.Tables(0).Rows(0)(x).ToString() & "-"
TotalNumber = TotalNumber + drCode2a.Tables(0).Rows(0)(x).ToString()
End If
Next
Dim delimiters As Char() = New Char() {"-"c}
Dim TotalNumberFilled As String() = NumberFilled.Split(delimiters, StringSplitOptions.RemoveEmptyEntries)
Dim AverageRating As Double = TotalNumber / TotalNumberFilled.Length
Response.Write(NumberFilled & "<br/>" & TotalNumber & "<br/>" & AverageRating)
Basically for my example NumberFilled = "1-2-" and TotalNumber = 3 and AverageRating = 1.5
It shows that 2 columns were filled out and the total they equal is 3 so the average = 1.5
As I said it works like it should but I'd like to tidy up if possible
I have a web form and want to use two ListView Controls. The second one does not seem to work. It won't update or insert. The commands seem to get lost somewhere. Is there a trick to having multiple ListViewControls on a form?
View 5 RepliesI am using the query builder to frame an Insert query that I am using for a FormsView control on a web page. The problem is there are more than 50 fields that need to be inserted and I am wondering if there is any better way to do this... than manually typing in IdNames of controls on the web page in the VALUES (,,,,,,,,,,.......) section of the SQL statement.
View 3 RepliesI Have a Dropdown which list the names of countries.
when i select a country, the top news related to that country must be displayed in grid.
may i know the RSS feed of every country for this application?
Any API to list all URL for RSS feed?
I have a query on datagrid .../(using asp.net 2.0 Version C# support by Linq Method) I use datagrid and one of column i place a dropdownlist (DropDownList1) and I fillup the data from DataGrid1_ItemDataBound After filling the data I want to select the value and pass to varibale via a hreaf to another page but no such value to be select. How to fetch value of dropdownlist on to next webpage.
View 3 RepliesIs there a calendar control that i can use in a web page that will allow my organisation to share the diary?
View 1 RepliesI got a content place holder, in this holder, I have a grid view. Inside this grid view, I will have multiple textbox added at runtime.
From the source code, I found that one of the textbox's id is as "ctl00_CPHDetail_gvDetail_ctl02_txt_Text1", CPHDetail is the content place holder, and gvDetail is the grid view.
What I wanted to do is to find the text box control and retrieve its value.
So far, this is what I have done, and it was able to return the correct info up to the grid view. It can never find the text box control.
I wonder will it caused by the ct102 between "ctl00_CPHDetail_gvDetail_ctl02_txt_Text1"
[Code]....
